Rollo label printer
You can use the Rollo label printer to print shipping labels. The Rollo label printer connects to your computer by USB and it doesn't require toner or ink to print.
If you need help installing, setting up, or troubleshooting your Rollo label printer, then contact Rollo support.
Set up your Rollo label printer
Follow these steps to set up your rollo label print.
Steps:
- If the printer switch is set to On, then turn it off by pressing the switch located on the back of the printer.
- Connect the power cable to your Rollo label printer.
- Connect the other end of the power cable to your power adapter, and connect the adapter to a power outlet.
- Connect the USB cable to your printer, and the other end to your computer.
- Insert the labels into the printer with the label side facing up.
- Adjust the tabs so that they hold the labels in place.
- Turn the power switch to On.
- Press and hold the purple button at the top of the label printer until you hear a beep, then let go. Your printer will automatically detect the label type and size.
Install your Rollo label printer
You need to install the rollow label printer driver to your computer.
Mac
Steps:
- Visit Rollo's website to download the correct driver for your computer.
- Find and open the installation package on your computer.
- In the dialog, double-click the
.pkgfile. - Follow the instructions in the installer, then click Close.
- After you turn on the printer, your computer will detect it automatically.
Windows
Steps:
- Visit Rollo's website to download the correct driver for your computer.
- Find and open the installation package on your computer.
- Follow the instructions in the installer.
- In Windows, go to Control panel > Devices and Printers.
- Right click Rollo Printer.
- In the dialog, click Advanced.
- From the Paper Size drop-down menu, select your label size.
- Click OK to save your settings.