Socket Mobile 2D barcode scanner
You can use the Socket Mobile S740 or CHS 7Qi 2D barcode scanner for scanning both digital and printed 1D and 2D barcodes.
The Socket Mobile S740 and CHS 7Qi are lightweight, portable barcode scanners that connect wirelessly to Shopify POS.
Who is the 2D barcode scanner for?
You should use the Socket Mobile S740 or CHS 7Qi 2D barcode scanner if you want to scan both 1D and 2D barcodes. You can scan 1D barcodes on products to add them to the cart quickly without browsing your catalog to find them. You can scan 2D barcodes on receipts to quickly find the order associated with that sale.
The scanner connects wirelessly to Shopify POS with Bluetooth, so you can use it at markets, fairs, pop-up locations, or a physical store. It's charged by plugging the included charging cable or cradle into a power socket. When fully charged, the scanner's battery lasts for up to 14 hours (about 15,000 scans).
To use this hardware with your Shopify store, you need to meet the following requirements:
- the all-new Shopify POS
- a compatible iPad or iPhone that is running iOS 12.2 or higher OR a compatible Android device that is running version 5.0 (Lollipop) or higher
The Shopify POS app works with devices which meet the following requirements:
|iPhone||iPhone 5s or better running iOS 12.2 or higher|
|iPad Air||Generation 2 or better running iOS 12.2 or higher|
|iPad||Generation 5 or better running iOS 12.2 or higher|
|iPad mini||Generation 2 or higher running iOS 12.2 or higher|
|iPad Pro||All iPad Pro models running iOS 12.2 or higher|
|Android||Android device running version 5.0 (Lollipop) or higher|
iOS 14 permission requirements
If you have updated your device to iOS 14 or higher and use third-party Shopify apps, then you might need to enable Cross-Website tracking in your iOS settings. Cross-Website tracking lets third-party Shopify apps that you have installed in your Shopify admin stay connected in Shopify Inbox, Shopify Point of Sale, and the Shopify mobile app.
To enable Cross-Website tracking, complete the following steps:
- Open the Settings app on your device.
- Tap Shopify, Shopify POS, or Shopify Inbox.
- Enable Allow Cross-Website Tracking.
Where to buy the Socket Mobile 2D barcode scanner
You can buy the Socket Mobile 2D barcode scanner from the following suppliers:
|Canada||Shopify Hardware Store|
|The United States||Shopify Hardware Store|
|The United Kingdom||Shopify Hardware Store|
|Ireland||Shopify Hardware Store|
|Germany||Shopify Hardware Store|
|European Union||Shopify Hardware Store||Australia||Shopify Hardware Store|
|New Zealand||Shopify Hardware Store|
Pair and connect your barcode scanner with your iPad
Make sure that Bluetooth is turned on in your iPad settings.
From Shopify POS, tap ≡ > Settings.
Tap Set up hardware > Barcode scanner.
When the Enable pairing mode dialog appears, scan the barcode. The scanner beeps three times when pairing mode is enabled.
Tap View available devices.
To pair and connect the barcode scanner, tap it when it appears in the Select An Accessory dialog (you might have to wait a few moments).
If the setup is not successful, then unpair the scanner and try again.
As long as the scanner remains paired with the iPad, the scanner connects automatically whenever it's in range.
Pairing with another iPad or a different Bluetooth device
You can pair your scanner with another iPad or Bluetooth device.
Unpair your barcode scanner
By default, your barcode scanner tries to connect to the last device it was paired with. If you want to use your barcode scanner with a different Bluetooth device, then you need to unpair the scanner first.
Turn on your barcode scanner.
Press and hold the scan button. At the same time, press and hold the power button. When you hear three beeps, release both buttons. Your barcode scanner powers off.
From Shopify POS, tap ≡ > Settings.
Tap Manage connected hardware.
Tap the name of your connected barcode scanner.
Tap Forget scanner.
Go to your iPad's settings (not the app settings).
Under MY DEVICES, tap the
ⓘbutton beside the Socket barcode scanner.
Tap Forget This Device.
Tap Forget Device.
If you're having trouble scanning barcodes with Shopify POS and the Socket Mobile S740 or CHS 7Qi barcode scanner, then try these troubleshooting steps to fix the problem:
- Check your scanner setup
- Check that your scanner and iPad are paired correctly
- Check your products' barcodes
- Trying to scan in inventory with the barcode scanner?
- Supported barcode types
- Factory reset
Check your scanner setup
Are you using the correct barcode scanner? The only 2D barcode scanners that Shopify POS supports are the Socket Mobile S740 and CHS 7Qi.
Are you using the barcode scanner with an iPad? The barcode scanner doesn't work with Shopify POS for iPhone or Android.
Is the scanner charged and in range of the iPad? Check that the scanner is fully charged and within range (100 meters or less).
What type of barcode are you scanning? Make sure that you're using a supported barcode type.
Check that your scanner and iPad are paired correctly
Is the barcode scanner showing as Connected on the Shopify POS Hardware settings screen when the scanner is on and in range? If not, then go to your iPad's Bluetooth settings and forget the barcode scanner, and pair it with your iPad again.
Is the scanner showing in your iPad's Bluetooth settings? Make sure that the iPad's Bluetooth is enabled and the scanner shows as Connected.
When you paired the scanner and iPad, did you scan the correct barcode in Shopify POS? The 2D barcode sets the barcode scanner to iOS mode to work with your iPad. If you didn't hear the three beeps when you scanned the barcode, or if you accidentally scanned the 1D barcode, then the scanner isn't in iOS mode. Unpair it and the iPad, and then pair them again, making sure that you scan the 2D barcode in Shopify POS and hear the three beeps before you move on to the next step.
Was the scanner paired with another iPad? The scanner can be paired with only one iPad at a time. Unpair the scanner and the other iPad, and then pair the scanner with the new iPad.
Do you have a poor Bluetooth connection? Read Apple's advice on reducing Bluetooth interference.
Check your products' barcodes
Does the scanner recognize any barcodes? Try scanning the barcode of a nearby item that isn't one of your store's products. If your scanner is paired correctly, then you should see an Unrecognized barcode error in Shopify POS. If you see this error, then carry on to the next steps. If you don't see an error, then unpair the scanner and iPad, and pair them again.
Is the product available on Shopify POS? If the product's hidden on Shopify POS, then scanning its barcode doesn't work because the app didn't load the product. If you see an Unrecognized barcode error, then check the product's availability settings in your Shopify admin.
Does the barcode number on the label match the product's barcode number in your Shopify admin? If there are extra zeros at the beginning or end of the number, then delete them and try again.
Trying to scan in inventory with the barcode scanner?
You can't scan in inventory with Shopify POS. The barcode scanner is for quickly adding products to the cart before checkout.
Supported barcode types
The Socket Mobile S740 and CHS 7Qi barcode scanners support the following 2D barcode types:
- GS1 Composite (EAN/UCC Composite)
- GS1 DataBar – Limited
- GS1 DataBar – Omni-directional
- Matrix 2 of 5
The 2D scanner also supports the following 1D barcode types:
- Bookland EAN
- Chinese 2 of 5
- Codabar (including ISBT 128 bit concatenation)
- Code 11, Code 128
- Code 39
- Trioptic Code 39
- Code 39 Full ASCII
- Code 93
- Discrete 2 of 5
- GS1 DataBar (RSS)
- GS1-128 (UCC-128/EAN-128)
- ISBT 128
- Interleaved 2 of 5 (ITF-14)
- Standard 2 of 5
- UPC/EAN (UPC-A, UPC-E, UPC-E1, EAN-13, EAN-8, UCC/EAN-128)
If the troubleshooting steps don't work and you still have trouble with the Socket Mobile S740 or CHS 7Qi barcode scanner, then you can try resetting the scanner to its factory settings.