Requirements for using the Star Micronics TSP143IIILAN receipt printer
Learn about the requirements for using the Star Micronics TSP143IIILAN receipt printer with Shopify POS.
On this page
Requirements for using the Star Micronics TSP143IIILAN receipt printer
To use this hardware with your Shopify store, you need to meet the following requirements:
- You need to use the Shopify POS app.
- You need to have a compatible iPad that is running iOS 15 or higher, an iPhone that is running iOS 15 or higher, or a compatible Android device that is running version 10 or higher
Make sure you have the required cables for the TSP143IIILAN receipt printer.
| Cable type | Look for this connector | Available from |
|---|---|---|
| Cash drawer cable |  | A cable for the cash drawer is included in the retail custom kit from Shopify. If you bought your cash drawer separately, then your supplier can sell you a cable. |
| Ethernet cable (for connecting to the router) |  | An Ethernet cable approximately 1 m in length is included when you buy this printer from Shopify. If you buy it elsewhere, then you need to buy the Ethernet cable. |
Considerations when using the Star Micronics TSP143IIILAN receipt printer
Shopify POS won't work with multiple Star Micronics TSP143IIILAN receipt printers at the same time.
Where to buy the Star Micronics TSP143IIILAN receipt printer
The Star Micronics TSP143IIILAN receipt printer is available from the Shopify Hardware Store in supported countries.
Printer paper requirements for the Star Micronics TSP143IIILAN receipt printer
Thermal paper rolls need to meet the following requirements to work with the Star Micronics TSP143IIILAN receipt printer:
- The width of the paper roll is 3 1/8" (80mm).
- The length of the paper roll doesn't exceed 230 feet (70m).