Star Micronics TSP100USB receipt printer

Note

The Star Micronics TSP100USB receipt printer has been discontinued. If you are using this printer, then you can continue to do so, or you can change to a supported printer.

Model number: TSP143IIIU

Where to buy the Star Micronics TSP100USB receipt printer

The Star Micronics TSP100USB receipt printer is not available from the Shopify Hardware Store, but you can purchase it directly from Barcodes Inc.

Buy printer paper

Any thermal paper rolls will work with this printer, provided that:

• the width is 3 1/8" (80mm)
• the length does not exceed 230 feet (70m).

For an explanation of how to load the receipt printer, see the guide in the manufacturer's hardware manual.

Install the Star Micronics TSP100USB receipt printer

The TSP100USB receipt printer connects to your network using a USB cable.

Note

To use this printer, you need a router that supports connections with a USB cord.

Steps:

Note

Make sure you have a Wi-Fi network set up before you continue with the receipt printer installation.

1. Connect the receipt printer to the APG Vasario 320 series cash drawer using the cash drawer cable.

2. Connect the receipt printer to the USB port on your router. This makes the printer discoverable in the Shopify POS app.

Note

The receipt printer must be connected to the same Wi-Fi network as your iPad.

After connecting your printer, don't forget to:

• Set it as the default printer (optional)
• Print a test receipt
• Test the connection to the cash drawer (if applicable).

Note

Having problems with your printer? Contact Star Micronics Support for help.

Limitations when using the Star Micronics TSP100USB receipt printer

Shopify POS has an exclusive, 1-to-1 relationship with the Star Micronics TSP100USB receipt printer, which means the following:

• You can't connect multiple iPads to the same printer.

• Shopify POS won't work with multiple printers at the same time.