Device stands for Shopify POS

Shopify supports a range of dedicated device stands for easier viewing and interaction, whether you're standing at a counter or walking around your store.

When you buy a hardware kit from Shopify, you can specify the type of stand you need when you place your order.

Supported iPad stands availability by country.
iPad standModel numberAvailability
POS Tablet Stand (USB-C)S2102A Canada, United States
Shopify POS Tablet Stand (Lightning) for iPad 9.7"S1803 Australia, Canada, Ireland, New Zealand, United Kingdom, United States
Shopify POS Tablet Stand (Lightning) for iPad 10.2" / Air 10.5"S1803 Australia, Canada, Ireland, New Zealand, Singapore, United Kingdom, United States
@Rest StandHDAR118 or H234Canada
WindFall iPad Stand 9.7"None Belgium, Denmark, Finland, Germany, Italy, Netherlands, Spain
WindFall iPad Stand 10.2"None Belgium, Denmark, Finland, Germany, Italy, Netherlands, Spain
Eddy Tablet StandNone Canada, Ireland, Singapore, United Kingdom, United States
Studio Proper Universal Tablet StandSPEKUPOSPVS3 Australia, New Zealand, Singapore
Bosstab Touch Nexus Univeral Tablet StandNone Australia, New Zealand
Bouncepad Click Tablet StandNone Canada, Ireland, United Kingdom, United States

Shopify POS Tablet Stand (Lightning)

The Shopify POS Tablet Stand (Lightning) is available only for merchants in supported countries.

Shopify POS Tablet Stand (Lightning)

The Shopify POS Tablet Stand (Lightning) is designed for countertop checkouts.

The stand has two parts: a case for the iPad and a base.

To assemble the stand, insert the iPad into the case and then attach the case to the base. To permanently bolt the stand to a countertop, you can purchase a mounting kit from the Shopify Hardware Store in the United States, Canada, United Kingdom or Ireland. The mounting kit is automatically included when you buy the Lightning Countertop Kit (Starter).

The iPad charges when it's on the base. You can also charge other devices, such as the dock for the Tap & Chip card reader, by using the USB-A ports on the base. The ports are best for charging devices with smaller batteries, such as card readers and phones.

When a customer is paying, you can tilt the iPad towards them so that they can verify the transaction or enter their email address.

The Shopify POS Tablet Stand (Lightning) for iPad 9.7" is compatible with the following 9.7 inch iPads:

  • iPad (5th and 6th generation)
  • iPad Pro (9.7")
  • iPad Air
  • iPad Air 2

The Shopify POS Tablet Stand (Lightning) for iPad 10.2"/Air 10.5" is compatible with the following iPads:

  • iPad (7th and 8th generation)
  • iPad Air (3rd Generation)

Set up the Shopify POS Tablet Stand (Lightning)

  1. Remove the end cap from the case.
  2. Insert the iPad into the case.
  3. Replace the end cap.
  4. Optional: Mount the stand to a countertop by using two M5 bolts. You need to drill holes in the countertop and insert the bolts from below into the stand.
  5. Plug in the power adapter.
  6. To attach the case, place it above the charging connectors on the base. Line up the magnets on the case and the base until they connect.
  7. On the back of the base, move the slider button to the lock position to prevent the case from being removed from the base.

POS Tablet Stand (USB-C)

POS Tablet Stand (USB-C)

The clamp design on the Shopify Tablet Mount (USB-C) expands to suit USB-C tablets at a variety of sizes, from 10.9” to 12.9”. An optional Connection Hub can be used with the stand.

The Shopify POS Tablet Stand (USB-C) is compatible with the following devices:

  • iOS tablets
    • iPad Pro 12.9” - 3rd, 4th, 5th, 6th generation
    • iPad Pro 11” - 1st, 2nd, 3rd generation
    • iPad 10th generation
  • Android tablets
    • Samsung S8
    • Samsung S8+
    • Samsung Galaxy Tab S6 Lite (2020)
    • Samsung Galaxy Tab S6 Lite (2022)
    • Samsung Galaxy Tab S7+ (2020)
    • Samsung Galaxy Tab S7 FE (2021)

@Rest iPad stand by Heckler Design

Model number: HDAR118 or H234 - available only in Canada.

The @Rest stand fits any iPad and enables you to use a viewing angle of 30 or 60 degrees. It's made of heavy steel and is designed to stay put wherever you use it most.

Set up the @Rest iPad stand

Follow these steps to set up the Rest iPad stand.

Steps:

  1. Attach the four adhesive feet to the base of the stand, to protect your counter top.
  2. Turn the stand right-way up and decide which side you're going to rest your iPad on. One gives you a viewing angle of 30 degrees, and the other 60 degrees.
  3. Insert the two resting pegs in the holes on the side you've chosen.
  4. Optional: You can stick the large adhesive pad to the stand before putting the iPad in place.

For more information, refer to the setup video on the manufacturer's website.

Studio Proper Universal Tablet Stand

The Studio Proper Universal Tablet Stand is a mount for your device that switches quickly between merchant and customer view. The set includes a Tablet Adapter and a Connect POS Pivot Stand.

Studio Proper Universal Tablet Stand

The low-set countertop stand is designed to blend seamlessly into the interior of any environment. The device can be screwed down or securely adhered to almost any countertop. You can mount your device to the stand with a simple twist and click.

The Studio Proper Universal Tablet Stand is compatible with all iPads and tablets that have a flat rear surface of 2.4" x 3.5" or larger.

Product specifications

  • Manufacturer: Studio Proper
  • Height: 2.76"
  • Width: 2.76"
  • Depth: 2.71"
  • Weight: 1.1 lbs

Touch Nexus universal tablet stand

The Touch Nexus universal tablet stand is a mount for your device that lets you to switch quickly between merchant and customer view. The set includes a fully assembled Nexus stand, adhesive table mount, and screw mount.

Universal Tablet Stand

The Touch Nexus universal tablet stand is compatible with all tablets that have a flat rear surface.

Set up the Touch Nexus universal tablet stand

The Touch Nexus universal tablet stand can be configured in slightly different ways to meet your store's needs.

For the most up-to-date instructions about installing your stand, refer to the Touch Nexus quick start guide.

Bouncepad Click tablet stand

The Bouncepad Click tablet stand is a mount for your device that lets you to switch quickly between merchant and customer view. The stand attaches securely to your countertop with a micro-suction base and is compatible with all tablets.

Bouncepad Click Tablet Stand

Set up the Bouncepad Click tablet stand

For the most up-to-date instructions about installing your stand, refer to the Bouncepad Click quick start guide.

Ready to start selling with Shopify POS?Try it free