Voorbeelden van script voor orderregels

Orderregelscripts zijn van invloed op artikelen in een winkelwagen en kunnen hun eigenschappen en prijzen. Deze scripts worden uitgevoerd wanneer het kenmerk winkelwagen wordt gewijzigd, zoals het toevoegen of verwijderen van een artikel, het wijzigen van het verzendadres of het toevoegen van een kortingscode.

Maak een nieuw script met een leeg sjabloon om de sjablonen op deze pagina te gebruiken.

Stappen:

  1. Ga in het Shopify-beheercentrum naar Apps > Script Editor.
  2. Klik op Script aanmaken.
  3. Klik op Orderregels.
  4. Selecteer Leeg sjabloon en klik daarna op Script aanmaken.
  5. Wis in het gedeelte Ruby-broncode de standaard coderegel. Output.cart = Input.cart
  6. Kopieer een script van deze pagina en plak het in het gedeelte Ruby-broncode.
  7. Bewerk het gedeelte Aanpasbare instellingen van het script zodat het in je winkel kan werken.
  8. Test je script Raadpleeg voor meer informatie Shopify-scripts testen en debuggen.
  9. Na het testen: - klik op Concept opslaan om een niet-gepubliceerd concept van het script op te slaan, of
    • klik op Save and publish om het script te maken en te publiceren

Gedifferentieerde winkelwagenkorting per besteding

Gebruik dit script om een korting in dollars aan te bieden die toeneemt met de totale waarde van de artikelen in hun winkelwagen. Deze korting wordt zo gelijkmatig mogelijk verdeeld over de afzonderlijke artikelen in de winkelwagen.

Je kunt dit script bijvoorbeeld gebruiken om klanten $ 25 korting op hun totaalbedrag aan te bieden als ze meer dan $ 150 uitgeven, $ 50 als ze meer dan $ 300 uitgeven, of $ 75 als ze meer dan $ 400 spenderen.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discounts by Spend Threshold
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to the cart. The
# discount will be spread, as evenly as possible, across all line
# items.
#
# - 'threshold' is the spend amount needed to qualify
# - 'discount_amount' is the dollar discount to apply to the
# cart
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDING_THRESHOLDS = [
  {
    threshold: 150,
    discount_amount: 25,
    discount_message: 'Spend $150 and get $25 off!',
  },
  {
    threshold: 300,
    discount_amount: 50,
    discount_message: 'Spend $300 and get $50 off!',
  },
  {
    threshold: 400,
    discount_amount: 75,
    discount_message: 'Spend $400 and get $75 off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DollarDiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DollarDiscountApplicator
  def initialize(discount_message)
    @discount_message = discount_message
  end

  def apply(line_item, discount_amount)
    new_line_price = line_item.line_price - discount_amount
    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredDiscountBySpendCampaign
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to the cart. The
# discount will be spread, as evenly as possible, across all line
# items.
# ================================================================
class TieredDiscountBySpendCampaign
  def initialize(tiers)
    @tiers = tiers.sort_by { |tier| tier[:threshold] }.reverse
  end

  def run(cart)
    applicable_tier = @tiers.find { |tier| cart.subtotal_price >= (Money.new(cents: 100) * tier[:threshold]) }
    return if applicable_tier.nil?

    discount_applicator = DollarDiscountApplicator.new(applicable_tier[:discount_message])
    discount_amount = applicable_tier[:discount_amount]
    items = cart.line_items.sort_by { |line_item| line_item.variant.price }
    self.loop_items(cart, items, discount_amount, discount_applicator)
  end

  def loop_items(cart, line_items, discount_amount, discount_applicator)
    avg_discount = (discount_amount.to_f * (1 / line_items.map(&:quantity).reduce(0, :+))).round(2)
    avg_discount = Money.new(cents: 100) * avg_discount
    discount_amount = Money.new(cents: 100) * discount_amount

    line_items.each_with_index do |line_item, index|
      break if discount_amount <= Money.zero

      line_discount = avg_discount * line_item.quantity

      if discount_amount < line_discount || index == (line_items.size - 1)
        discount_update = line_item.line_price > discount_amount ? discount_amount : line_item.line_price
      else
        discount_update = line_item.line_price > line_discount ? line_discount : line_item.line_price
      end

      discount_amount -= discount_update
      discount_applicator.apply(line_item, discount_update)
    end
  end
end

CAMPAIGNS = [
  TieredDiscountBySpendCampaign.new(SPENDING_THRESHOLDS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Gedifferentieerde korting per besteding

Gebruik dit script om een kortingspercentage aan te bieden die groter wordt volgens de totale waarde van artikelen in de winkelwagen.

Je kunt dit script bijvoorbeeld gebruiken om klanten 10% korting te bieden als ze $ 30 of meer uitgeven, 15 % korting als ze $ 50 of meer spenderen, of 20% korting als ze $ 100 of meer uitgeven.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discounts by Spend Threshold
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to each item in
# the cart.
#
# - 'threshold' is the spend amount needed to qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDING_THRESHOLDS = [
  {
    threshold: 30,
    discount_type: :percent,
    discount_amount: 10,
    discount_message: 'Spend $30 and get 10% off!',
  },
  {
    threshold: 50,
    discount_type: :percent,
    discount_amount: 15,
    discount_message: 'Spend $50 and get 15% off!',
  },
  {
    threshold: 100,
    discount_type: :percent,
    discount_amount: 20,
    discount_message: 'Spend $100 and get 20% off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredDiscountBySpendCampaign
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to each item in
# the cart.
# ================================================================
class TieredDiscountBySpendCampaign
  def initialize(tiers)
    @tiers = tiers.sort_by { |tier| tier[:threshold] }.reverse
  end

  def run(cart)
    applicable_tier = @tiers.find { |tier| cart.subtotal_price >= (Money.new(cents: 100) * tier[:threshold]) }
    return if applicable_tier.nil?

    discount_applicator = DiscountApplicator.new(
      applicable_tier[:discount_type],
      applicable_tier[:discount_amount],
      applicable_tier[:discount_message]
    )

    cart.line_items.each do |line_item|
      next if line_item.variant.product.gift_card?
      discount_applicator.apply(line_item)
    end
  end
end

CAMPAIGNS = [
  TieredDiscountBySpendCampaign.new(SPENDING_THRESHOLDS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Gedifferentieerde korting per hoeveelheid

Gebruik dit script om een bulkkorting aan te bieden voor een bepaald product, met een kortingspercentage dat stijgt op basis van het aantal producten in de winkelwagen.

Je kunt dit script bijvoorbeeld gebruiken om klanten 10% aan te bieden op hun bestelling als ze twee hoeden of meer kopen of 15% als ze vijf hoeden of meer kopen.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discount by Quantity
#
# If the total quantity of matching items is greater than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selector' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'tiers' is a list of tiers where:
# - 'quantity' is the minimum quantity you need to buy to
# qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_DISCOUNT_TIERS = [
  {
    product_selector_match_type: :include,
    product_selector_type: :tag,
    product_selectors: ["your_tag"],
    tiers: [
      {
        quantity: 2,
        discount_type: :percent,
        discount_amount: 10,
        discount_message: '10% off for 2+',
      },
      {
        quantity: 5,
        discount_type: :percent,
        discount_amount: 15,
        discount_message: '15% off for 5+',
      },
    ],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredPricingCampaign
#
# If the total quantity of matching items is greater than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
# ================================================================
class TieredPricingCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      applicable_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if applicable_items.nil?

      total_applicable_quantity = applicable_items.map(&:quantity).reduce(0, :+)
      tiers = campaign[:tiers].sort_by { |tier| tier[:quantity] }.reverse
      applicable_tier = tiers.find { |tier| tier[:quantity] <= total_applicable_quantity }

      next if applicable_tier.nil?

      discount_applicator = DiscountApplicator.new(
        applicable_tier[:discount_type],
        applicable_tier[:discount_amount],
        applicable_tier[:discount_message]
      )

      applicable_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  TieredPricingCampaign.new(PRODUCT_DISCOUNT_TIERS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Gedifferentieerde korting op productuitgaven

Gebruik dit script om een kortingspercentage aan te bieden die groter wordt naarmate de totale waarde van specifieke artikelen in de winkelwagen.

Je kunt dit script bijvoorbeeld gebruiken om klanten 10% korting aan te bieden als ze $ 30 of meer uitgeven, 15% als ze $ 50 of meer spenderen en 20% als ze $ 100 of meer uitgeven, maar alleen voor artikelen die overeenkomen met een specifieke tag.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discount by Spend Threhsold
#
# If the total amount spent on matching items is greather than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - 'product_selectors' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes).
# - 'tiers' is a list of tiers where:
# - 'threshold' is the minimum dollar amount needed to
# qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_DISCOUNT_TIERS = [
  {
    product_selector_match_type: :exclude,
    product_selector_type: :tag,
    product_selectors: ["your_tag", "another_tag"],
    tiers: [
      {
        threshold: 100,
        discount_type: :percent,
        discount_amount: 10,
        discount_message: 'Spend $100 or more, and get 10% off!',
      },
    ],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredPricingCampaign
#
# If the total amount spent on matching items is greather than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
# ================================================================
class TieredPricingCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      tiers = campaign[:tiers].sort_by { |tier| tier[:threshold] }.reverse
      applicable_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if applicable_items.nil?

      total_applicable_cost = applicable_items.map(&:line_price).reduce(Money.zero, :+)
      applicable_tier = tiers.find { |tier| total_applicable_cost >= (Money.new(cents: 100) * tier[:threshold]) }

      next if applicable_tier.nil?

      discount_applicator = DiscountApplicator.new(
        applicable_tier[:discount_type],
        applicable_tier[:discount_amount],
        applicable_tier[:discount_message]
      )

      applicable_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  TieredPricingCampaign.new(PRODUCT_DISCOUNT_TIERS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Getagde productkorting

Gebruik dit script om een korting te bieden op artikelen met specifieke tags.

Je kunt dit script bijvoorbeeld gebruiken om klanten 10% korting te bieden bij artikelen getagd met discounted.

# ================================ Customizable Settings ================================
# ================================================================
# Discount by Product Tag
#
# Any product that is tagged (or not, depending on the setting
# below) with the entered tag(s) will be discounted by the entered
# amount.
#
# - 'product_tag_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_tags' is a list of product tags for qualified
# products
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_TAG_DISCOUNTS = [
  {
    product_tag_match_type: :include,
    product_tags: ["your_tag", "another_tag"],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: '10% off tagged products!'
  }
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductTagSelector
#
# Finds whether the supplied line item does (or does not) have any
# of the entered tags.
# ================================================================
class ProductTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    (product_tags & @tags).send(@comparator)
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# ProductTagDiscountCampaign
#
# Any "matching" product (by tag) will be discounted by the entered
# amount.
# ================================================================
class ProductTagDiscountCampaign
  def initialize(discounts)
    @discounts = discounts
  end

  def run(cart)
    @discounts.each do |discount|
      product_tag_selector = ProductTagSelector.new(
        discount[:product_tag_match_type],
        discount[:product_tags]
      )

      discount_applicator = DiscountApplicator.new(
        discount[:discount_type],
        discount[:discount_amount],
        discount[:discount_message]
      )

      cart.line_items.each do |line_item|
        next unless product_tag_selector.match?(line_item)
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  ProductTagDiscountCampaign.new(PRODUCT_TAG_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
 campaign.run(Input.cart)
end

Output.cart = Input.cart

Getagde klantenkorting

Gebruik dit script om kortingen aan klanten aan te bieden met specifieke tags.

Je kunt dit script bijvoorbeeld gebruiken om een korting van 20% aan te bieden als de klant de tag VIP heeft.

# ================================ Customizable Settings ================================
# ================================================================
# Discounts by Customer Tag
#
# If a customer is tagged (or not, depending on the setting below)
# with the entered tag(s), the entered discount will be applied to
# each item in the cart.
#
# - 'customer_tag_match_type' determines whether we look for the customer
# to be tagged with any of the entered tags or not. Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of tags to identify qualified
# customers
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["VIP"],
    discount_type: :percent,
    discount_amount: 20,
    discount_message: "Discount for VIP customers!",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountForCustomerTagCampaign
#
# If we have a "matching" customer (by tag), the entered discount
# is applied.
# ================================================================
class DiscountForCustomerTagCampaign
  def initialize(discounts)
    @discounts = discounts
  end

  def run(cart)
    return unless cart.customer&.tags

    @discounts.each do |discount|
      customer_tag_selector = CustomerTagSelector.new(discount[:customer_tag_match_type], discount[:customer_tags])

      next unless customer_tag_selector.match?(cart.customer)

      discount_applicator = DiscountApplicator.new(
        discount[:discount_type],
        discount[:discount_amount],
        discount[:discount_message]
      )

      cart.line_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountForCustomerTagCampaign.new(DISCOUNTS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Een bepaald bedrag van een product kopen, een tweede bedrag tegen korting krijgen

Gebruik dit script om een korting op een specifiek artikel aan te bieden als er meer dan een bepaalde hoeveelheid is gekocht.

Je kunt dit script bijvoorbeeld gebruiken om klanten aan te bieden om drie artikelen met de tag discount te kopen en 50% korting te krijgen op een vierde artikel met de tag discount.

# ================================ Customizable Settings ================================
# ================================================================
# Buy X, Get Y For Z Discount
#
# Buy a certain number of "matching" items, get a certain number
# of the same matching items with the entered discount applied. For
# example:
#
# "Buy 2 products tagged with 'tag', get another product
# tagged with 'tag' for 10% off"
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - This should only be a number (ie. no quotes)
# - ':variant_id' to find products by variant ID
# - This should only be a number (ie. no quotes)
# - ':all' for all products
# - 'product_selectors' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'quantity_to_discount' is the number of products to discount
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
#
# Something to note for the case of running multiple offers is
# that there shouldn't be any overlap between product selection
# as this can lead to extra discounting. For example, you should
# NOT offer "Buy 1 Product X, get 1 50% off", as well as "Buy 2
# Product X, get 1 free"
# ================================================================
BUY_X_GET_Y_FOR_Z = [
  {
    product_selector_match_type: :include,
    product_selector_type: :all,
    product_selectors: nil,
    quantity_to_buy: 1,
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 50,
    discount_message: 'Buy one item, get the second 50% off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# BuyXGetYForZCampaign
#
# Buy a certain number of "matching" items, get a certain number
# of the same matching items with the entered discount applied.
# ================================================================
class BuyXGetYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_items = eligible_items.sort_by { |line_item| -line_item.variant.price }
      quantity_to_buy = campaign[:quantity_to_buy]
      quantity_to_discount = campaign[:quantity_to_discount]
      bundle_size = quantity_to_buy + quantity_to_discount
      number_of_bundles = (eligible_items.map(&:quantity).reduce(0, :+) / bundle_size).floor
      number_of_discountable_items = number_of_bundles * quantity_to_discount

      next unless number_of_discountable_items > 0

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      self.loop_items(
        discount_applicator, cart, eligible_items, number_of_discountable_items, quantity_to_buy, quantity_to_discount
      )
    end
  end

  def loop_items(discount_applicator, cart, line_items, num_to_discount, quantity_to_buy, quantity_to_discount)
    surplus = 0
    bundle_size = quantity_to_buy + quantity_to_discount

    line_items.each do |line_item|
      line_quantity = line_item.quantity + surplus

      if line_quantity > quantity_to_buy
        bundles_per_line = (line_quantity / bundle_size).floor
        take_quantity = bundles_per_line * quantity_to_discount
        surplus += (line_quantity - (bundle_size * bundles_per_line))

        if line_item.quantity > take_quantity
          discount_item = line_item.split(take: take_quantity)
          discount_applicator.apply(discount_item)
          position = cart.line_items.find_index(line_item)
          cart.line_items.insert(position + 1, discount_item)
          num_to_discount -= take_quantity
        else
          discount_applicator.apply(line_item)
          num_to_discount -= line_item.quantity
        end
      else
        surplus += line_quantity
      end

      break if num_to_discount <= 0
    end
  end
end

CAMPAIGNS = [
  BuyXGetYForZCampaign.new(BUY_X_GET_Y_FOR_Z),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Een bundel kopen, en een extra product tegen korting ontvangen

Gebruik dit script om een korting op een specifiek artikel aan te bieden als ze een aantal andere artikelen hebben gekocht.

Je kunt dit script bijvoorbeeld gebruiken om klanten een gratis paar sokken te bieden als ze ook een hoed, een t-shirt en een zonnebril kopen.

# ================================ Customizable Settings ================================
# ================================================================
# Buy Products VWX, get Product Y for Z Discount
#
# Buy a specific bundle of products, get another product at a
# discount. For example:
#
# "Buy a t-shirt, a hat, and sunglasses, get a free pair of socks"
#
# - 'bundle_items' is a list of the items that comprise the
# bundle, where:
# - 'product_id' is the ID of the product
# - 'quantity_needed' is the quantity necessary to complete
# the bundle
# - 'quantity_to_buy' is the number of bundles needed to qualify
# for a discount product
# - 'discount_product_selector_match_type' determines whether we
# look for products that do or don't match the entered
# selectors. Can be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'discount_product_selector_type' determines how qualifying
# products will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'discount_product_selectors' is a list of identifiers (from
# above) for qualifying products. Product/Variant ID lists
# should only contain numbers (ie. no quotes). If ':all' is
# used, this can also be 'nil'.
# - 'quantity_to_discount' is the number of items to discount
# per offer
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUNDLE_DISCOUNTS = [
  {
    bundle_items: [
      {
        product_id: 1234567890987,
        quantity_needed: 1
      },
      {
        product_id: 1234567890986,
        quantity_needed: 1
      },
    ],
    quantity_to_buy: 1,
    discount_product_selector_match_type: :include,
    discount_product_selector_type: :product_id,
    discount_product_selectors: [1234567890123],
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "Buy Product VWX, get Product Y for 10% off",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# BundleSelector
#
# Finds any items that are part of the entered bundle and saves
# them.
# ================================================================
class BundleSelector
  def initialize(bundle_items)
    @bundle_items = bundle_items.reduce({}) do |acc, bundle_item|
      acc[bundle_item[:product_id]] = {
        cart_items: [],
        quantity_needed: bundle_item[:quantity_needed],
        total_quantity: 0,
      }

      acc
    end
  end

  def build(cart)
    cart.line_items.each do |line_item|
      next unless @bundle_items[line_item.variant.product.id]

      @bundle_items[line_item.variant.product.id][:cart_items].push(line_item)
      @bundle_items[line_item.variant.product.id][:total_quantity] += line_item.quantity
    end

    @bundle_items
  end
end

# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each_with_index do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BundleDiscountCampaign
#
# If the entered bundle is present, the entered discount is
# applied to the entered product.
# ================================================================
class BundleDiscountCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      bundle_selector = BundleSelector.new(campaign[:bundle_items])
      bundle_items = bundle_selector.build(cart)

      next if bundle_items.any? do |product_id, product_info|
        product_info[:total_quantity] < product_info[:quantity_needed]
      end

      num_bundles = bundle_items.map do |product_id, product_info|
        (product_info[:total_quantity] / product_info[:quantity_needed])
      end

      num_bundles = num_bundles.min.floor

      product_selector = ProductSelector.new(
        campaign[:discount_product_selector_match_type],
        campaign[:discount_product_selector_type],
        campaign[:discount_product_selectors],
      )

      discount_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if discount_items.nil?

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, discount_items, (campaign[:quantity_to_discount] * num_bundles))
    end
  end
end

CAMPAIGNS = [
  BundleDiscountCampaign.new(BUNDLE_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Bundelkorting

Gebruik dit script om een korting te bieden wanneer een specifieke reeks producten aan de winkelwagen wordt toegevoegd.

Je kunt dit script bijvoorbeeld gebruiken om klanten 20% te bieden bij de aankoop van een t-shirt, een hoed en een zonnebril.

# ================================ Customizable Settings ================================
# ================================================================
# Buy Products WXY, get Z Discount
#
# Buy a specific bundle of products, get that bundle at a
# discount. For example:
#
# "Buy a t-shirt, a hat, and sunglasses, get 20% off each"
#
# - 'bundle_items' is a list of the items that comprise the
# bundle, where:
# - 'product_id' is the ID of the product
# - 'quantity_needed' is the quantity necessary to complete
# the bundle
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUNDLE_DISCOUNTS = [
  {
    bundle_items: [
      {
        product_id: 1234567890987,
        quantity_needed: 1
      },
      {
        product_id: 1234567890986,
        quantity_needed: 1
      },
    ],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "Buy Product X and Product Y, get 10% off!",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# BundleSelector
#
# Finds any items that are part of the entered bundle and saves
# them.
# ================================================================
class BundleSelector
  def initialize(bundle_items)
    @bundle_items = bundle_items.reduce({}) do |acc, bundle_item|
      acc[bundle_item[:product_id]] = {
        cart_items: [],
        quantity_needed: bundle_item[:quantity_needed],
        total_quantity: 0,
      }

      acc
    end
  end

  def build(cart)
    cart.line_items.each do |line_item|
            next if line_item.line_price_changed?
      next unless @bundle_items[line_item.variant.product.id]

      @bundle_items[line_item.variant.product.id][:cart_items].push(line_item)
      @bundle_items[line_item.variant.product.id][:total_quantity] += line_item.quantity
    end

    @bundle_items
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each_with_index do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BundleDiscountCampaign
#
# If the entered bundle is present, the entered discount is
# applied to each item in the bundle.
# ================================================================
class BundleDiscountCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      bundle_selector = BundleSelector.new(campaign[:bundle_items])
      bundle_items = bundle_selector.build(cart)

      next if bundle_items.any? do |product_id, product_info|
        product_info[:total_quantity] < product_info[:quantity_needed]
      end

      num_bundles = bundle_items.map do |product_id, product_info|
        (product_info[:total_quantity] / product_info[:quantity_needed])
      end

      num_bundles = num_bundles.min.floor

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)

      bundle_items.each do |product_id, product_info|
        discount_loop.loop_items(
          cart,
          product_info[:cart_items],
          (product_info[:quantity_needed] * num_bundles),
        )
      end
    end
  end
end

CAMPAIGNS = [
  BundleDiscountCampaign.new(BUNDLE_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Korting Twee voor de prijs van één

Gebruik dit script om een kortingspercentage voor een artikel aan te bieden wanneer een klant een bepaald aantal van een ander product koopt.

Je kunt dit script bijvoorbeeld gebruiken om klanten een hoed met een 10% korting te bieden als ze 2 t-shirts kopen.

# ================================ Customizable Settings ================================
# ================================================================
# Buy V of Product W, Get X of Product Y for Z Discount
#
# Buy a certain number of "matching" items, get a certain number
# of a different set of "matching" items with the entered discount
# applied. For example:
#
# "Buy 2 t-shirts, get 1 hat for 10% off"
#
# - 'buy_product_selector_match_type' determines whether we look
# for products that do or don't match the entered selectors.
# Can be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'buy_product_selector_type' determines how eligible products
# will be identified. Can be:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'buy_product_selectors' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'get_selector_match_type' is the same idea as the "Buy"
# version above
# - 'get_product_selector_type' is the same idea as the "Buy"
# version above
# - 'get_product_selectors' is the same idea as the "Buy"
# version above
# - 'quantity_to_discount' is the number of products to discount
# - 'allow_incomplete_bundle' determines whether a portion of
# the items to discount can be discounted, or all items
# need to be present. Can be:
# - 'true'
# - 'false'
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUYVOFW_GETXOFY_FORZ = [
  {
    buy_product_selector_match_type: :include,
    buy_product_selector_type: :tag,
    buy_product_selectors: ["your_tag", "another_tag"],
    quantity_to_buy: 1,
    get_product_selector_match_type: :include,
    get_product_selector_type: :tag,
    get_product_selectors: ["your_other_tag", "a_different_tag"],
    quantity_to_discount: 1,
    allow_incomplete_bundle: false,
    discount_type: :percent,
    discount_amount: 100,
    discount_message: 'Buy a Product X, get a Product Y free!',
  },
  {
    buy_product_selector_match_type: :include,
    buy_product_selector_type: :id,
    buy_product_selectors: [1234567890987, 1234567890986],
    quantity_to_buy: 1,
    get_product_selector_match_type: :include,
    get_product_selector_type: :id,
    get_product_selectors: [1234567890985, 1234567890984],
    quantity_to_discount: 1,
    allow_incomplete_bundle: false,
    discount_type: :dollar,
    discount_amount: 10,
    discount_message: 'Buy a Product X, get $10 off a Product Y!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BuyVofWGetXofYForZCampaign
#
# Buy a certain number of "matching" items, get a certain number
# of a different set of "matching" items with the entered discount
# applied.
# ================================================================
class BuyVofWGetXofYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      buy_product_selector = ProductSelector.new(
        campaign[:buy_product_selector_match_type],
        campaign[:buy_product_selector_type],
        campaign[:buy_product_selectors],
      )

      get_product_selector = ProductSelector.new(
        campaign[:get_product_selector_match_type],
        campaign[:get_product_selector_type],
        campaign[:get_product_selectors],
      )

      buy_items = []
      get_items = []

      cart.line_items.each do |line_item|
        buy_items.push(line_item) if buy_product_selector.match?(line_item)
        get_items.push(line_item) if get_product_selector.match?(line_item)
      end

      next if buy_items.empty? || get_items.empty?

      get_items = get_items.sort_by { |line_item| line_item.variant.price }
      quantity_to_buy = campaign[:quantity_to_buy]
      quantity_to_discount = campaign[:quantity_to_discount]
      buy_offers = (buy_items.map(&:quantity).reduce(0, :+) / quantity_to_buy).floor

      if campaign[:allow_incomplete_bundle]
        number_of_bundles = buy_offers
      else
        get_offers = (get_items.map(&:quantity).reduce(0, :+) / quantity_to_discount).floor
        number_of_bundles = [buy_offers, get_offers].min
      end

      number_of_discountable_items = number_of_bundles * quantity_to_discount

      next unless number_of_discountable_items > 0

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, get_items, number_of_discountable_items)
    end
  end
end

CAMPAIGNS = [
  BuyVofWGetXofYForZCampaign.new(BUYVOFW_GETXOFY_FORZ),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Een bepaalde hoeveelheid van een product kopen voor een bepaald bedrag

Gebruik dit script om een aantal producten aan te bieden voor een gekozen prijs.

Je kunt dit script bijvoorbeeld gebruiken om klanten twee t-shirts aan te bieden voor $ 20.

# ================================ Customizable Settings ================================
# ================================================================
# Buy X of Product Y for $Z
#
# Buy a certain number of "matching" items for a specific price.
# For example:
#
# "Buy 2 t-shirts for $20"
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selectors' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should
# only contain numbers (ie. no quotes). If ':all' is used,
# this can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'final_price` is the amount to charge for all products that
# are part of the offer
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUY_X_GET_Y_FOR_Z = [
  {
    product_selector_match_type: :include,
    product_selector_type: :tag,
    product_selectors: ["your_tag"],
    quantity_to_buy: 2,
    final_price: 100,
    discount_message: 'Buy 2 for $20',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DollarDiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DollarDiscountApplicator
  def initialize(discount_message)
    @discount_message = discount_message
  end

  def apply(line_item, discount_amount)
    new_line_price = line_item.line_price - discount_amount
    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# BuyXOfYForZCampaign
#
# Buy a certain number of "matching" items for a specific price.
# ================================================================
class BuyXOfYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_item_count = eligible_items.map(&:quantity).reduce(0, :+)
      quantity_to_buy = campaign[:quantity_to_buy]
      number_of_offers = (eligible_item_count / quantity_to_buy).floor

      next unless number_of_offers > 0

      number_of_discountable_items = number_of_offers * quantity_to_buy
      total_offer_price = Money.new(cents: 100) * (number_of_offers * campaign[:final_price])
      discount_applicator = DollarDiscountApplicator.new(campaign[:discount_message])

      self.loop_items(cart, eligible_items, number_of_discountable_items, total_offer_price, discount_applicator)
    end
  end

  def loop_items(cart, line_items, num_to_discount, total_price, discount_applicator)
    current_price = Money.zero
    avg_price = total_price * (1 / num_to_discount)

    line_items = line_items.sort_by { |line_item| line_item.variant.price }

    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        discount_amount = split_line_item.line_price - (total_price - current_price)
        discount_applicator.apply(split_line_item, discount_amount)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      elsif line_item.quantity == num_to_discount
        discount_amount = line_item.line_price - (total_price - current_price)
        discount_applicator.apply(line_item, discount_amount)
        break
      else
        if line_item.variant.price <= avg_price
          current_price += line_item.line_price
        else
          discount_amount = (line_item.variant.price - avg_price) * line_item.quantity
          current_price += (line_item.line_price - discount_amount)
          discount_applicator.apply(line_item, discount_amount)
        end

        num_to_discount -= line_item.quantity
      end
    end
  end
end

CAMPAIGNS = [
  BuyXOfYForZCampaign.new(BUY_X_GET_Y_FOR_Z),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Gratis artikel bij aankoop

Gebruik dit script om een korting op een specifiek product te bieden als het totaal van de winkelwagen hoger is dan een bepaald bedrag.

Je kunt dit script bijvoorbeeld gebruiken om klanten een gratis cadeau te bieden als ze meer dan $ 75 uitgeven.

# ================================ Customizable Settings ================================
# ================================================================
# Spend $X, get Product Y for Z Discount
#
# If the cart total is greater than (or equal to) the entered
# threshold (less the discounted amount), the entered number of
# "matching" items is discounted by the entered amount.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selector' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should
# only contain numbers (ie. no quotes). If ':all' is used,
# this can also be 'nil'.
# - 'threshold' is the dollar amount needed to spend to qualify
# - 'quantity_to_discount' is the number of items to discount
# if qualified
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDX_GETY_FORZ = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890123],
    threshold: 75,
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 100,
    discount_message: 'Spend $75 or more and get a free Product X!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# SpendXGetYForZCampaign
#
# If the cart total is greater than (or equal to) the entered
# threshold (less the discounted amount), the entered number of
# "matching" items is discounted by the entered amount.
# ================================================================
class SpendXGetYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      threshold = Money.new(cents: 100) * campaign[:threshold]

      next if cart.subtotal_price < threshold

      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_items = eligible_items.sort_by { |line_item| line_item.variant.price }
      num_to_discount = campaign[:quantity_to_discount]
      cart_total = cart.subtotal_price

      eligible_items.each do |line_item|
        break if num_to_discount <= 0

        if line_item.quantity > num_to_discount
          cart_total -= line_item.variant.price * num_to_discount
          break
        else
          cart_total -= line_item.line_price
          num_to_discount -= line_item.quantity
        end
      end

      next if cart_total < threshold

      discount_applicator = discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, eligible_items, campaign[:quantity_to_discount])
    end
  end
end

CAMPAIGNS = [
  SpendXGetYForZCampaign.new(SPENDX_GETY_FORZ),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Kortingcodes uitschakelen

Gebruik dit script om het gebruik van kortingscodes uit te schakelen bij het afrekenproces.

Je kunt dit script bijvoorbeeld gebruiken om te voorkomen dat klanten kortingscodes gebruiken terwijl je winkel een aanbieding heeft.

# ================================ Customizable Settings ================================
# ================================================================
# Disable Discount Code Use
#
# Any discount codes will be rejected with the entered message.
#
# - 'REJECTION_MESSAGE' is the message to show when a discount
# code is rejected
# ================================================================
REJECTION_MESSAGE = 'Discount codes cannot be used during this sale'

# ================================ Script Code (do not edit) ================================
# ================================================================
# DisableDiscountCodesCampaign
#
# Any discount codes will be rejected with the entered message.
# ================================================================
class DisableDiscountCodesCampaign
  def initialize(rejection_message)
    @rejection_message = rejection_message
  end

  def run(cart)
    return if cart.discount_code.nil?

    cart.discount_code.reject(message: @rejection_message)
  end
end

CAMPAIGNS = [
  DisableDiscountCodesCampaign.new(REJECTION_MESSAGE),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Klaar om te beginnen met verkopen met Shopify?

Probeer het gratis