Ví dụ về tập lệnh mục hàng

Tập lệnh mục hàng ảnh hưởng đến các mặt hàng trong giỏ hàng và có thể thay đổi thuộc tính và giá của mặt hàng. Các tập lệnh này chạy mỗi lần thuộc tính giỏ hàng thay đổi, như thêm hoặc xóa mặt hàng, thay đổi địa chỉ giao hàng hoặc thêm mã giảm giá.

Để sử dụng mẫu trên trang này, tạo tập lệnh với mẫu trống.

Các bước thực hiện:

  1. Trong trang quản trị Shopify, vào Ứng dụng > Script Editor.
  2. Nhấp vào Create script (Tạo tập lệnh).
  3. Nhấp vào Mục hàng.
  4. Chọn Blank template (Mẫu trống), rồi nhấp vào Create script (Tạo tập lệnh).
  5. Trong mục Ruby source code (Mã nguồn Ruby), xóa dòng mã mặc định: Output.cart = Input.cart
  6. Sao chép tập lệnh từ trang này và dán vào mục Ruby source code (Mã nguồn Ruby).
  7. Chỉnh sửa mục Customizable Settings (Cài đặt tùy chỉnh) của tập lệnh để hoạt động tại cửa hàng.
  8. Kiểm tra tập lệnh. Để biết thêm thông tin, tham khảo Thử nghiệm và gỡ lỗi Đoạn mã Shopify.
  9. Sau khi kiểm tra: - nhấp vào Save draft (Lưu bản nháp) để lưu bản nháp chưa đăng của tập lệnh hoặc
    • nhấp vào Save and publish (Lưu và đăng) để tạo và đăng tập lệnh.

Ưu đãi giảm giá giỏ hàng được xếp hạng theo mức chi tiêu

Sử dụng tập lệnh này để tặng ưu đãi giảm giá theo số tiền, tăng theo tổng giá trị mặt hàng trong giỏ hàng của khách. Ưu đãi giảm giá này được chia đều nhất có thể cho từng mặt hàng trong giỏ hàng.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm 25.000 đồng trong tổng giá trị đơn hàng nếu khách chi tiêu nhiều hơn 150.000 đồng, 50.000 đồng nếu khách chi tiêu nhiều hơn 300.000 đồng hoặc 75.000 đồng nếu khách chi tiêu nhiều hơn 400.000 đồng.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discounts by Spend Threshold
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to the cart. The
# discount will be spread, as evenly as possible, across all line
# items.
#
# - 'threshold' is the spend amount needed to qualify
# - 'discount_amount' is the dollar discount to apply to the
# cart
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDING_THRESHOLDS = [
  {
    threshold: 150,
    discount_amount: 25,
    discount_message: 'Spend $150 and get $25 off!',
  },
  {
    threshold: 300,
    discount_amount: 50,
    discount_message: 'Spend $300 and get $50 off!',
  },
  {
    threshold: 400,
    discount_amount: 75,
    discount_message: 'Spend $400 and get $75 off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DollarDiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DollarDiscountApplicator
  def initialize(discount_message)
    @discount_message = discount_message
  end

  def apply(line_item, discount_amount)
    new_line_price = line_item.line_price - discount_amount
    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredDiscountBySpendCampaign
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to the cart. The
# discount will be spread, as evenly as possible, across all line
# items.
# ================================================================
class TieredDiscountBySpendCampaign
  def initialize(tiers)
    @tiers = tiers.sort_by { |tier| tier[:threshold] }.reverse
  end

  def run(cart)
    applicable_tier = @tiers.find { |tier| cart.subtotal_price >= (Money.new(cents: 100) * tier[:threshold]) }
    return if applicable_tier.nil?

    discount_applicator = DollarDiscountApplicator.new(applicable_tier[:discount_message])
    discount_amount = applicable_tier[:discount_amount]
    items = cart.line_items.sort_by { |line_item| line_item.variant.price }
    self.loop_items(cart, items, discount_amount, discount_applicator)
  end

  def loop_items(cart, line_items, discount_amount, discount_applicator)
    avg_discount = (discount_amount.to_f * (1 / line_items.map(&:quantity).reduce(0, :+))).round(2)
    avg_discount = Money.new(cents: 100) * avg_discount
    discount_amount = Money.new(cents: 100) * discount_amount

    line_items.each_with_index do |line_item, index|
      break if discount_amount <= Money.zero

      line_discount = avg_discount * line_item.quantity

      if discount_amount < line_discount || index == (line_items.size - 1)
        discount_update = line_item.line_price > discount_amount ? discount_amount : line_item.line_price
      else
        discount_update = line_item.line_price > line_discount ? line_discount : line_item.line_price
      end

      discount_amount -= discount_update
      discount_applicator.apply(line_item, discount_update)
    end
  end
end

CAMPAIGNS = [
  TieredDiscountBySpendCampaign.new(SPENDING_THRESHOLDS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá xếp hạng theo mức chi tiêu

Sử dụng tập lệnh này để tặng ưu đãi giảm giá theo tỷ lệ phần trăm, tăng theo tổng giá trị của mặt hàng trong giỏ hàng.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm 10% nếu khách chi tiêu từ 300.000 đồng trở lên, 15% nếu khách chi tiêu từ 500.000 đồng trở lên hoặc 20% nếu khách chi tiêu từ 1.000.000 đồng trở lên.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discounts by Spend Threshold
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to each item in
# the cart.
#
# - 'threshold' is the spend amount needed to qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDING_THRESHOLDS = [
  {
    threshold: 30,
    discount_type: :percent,
    discount_amount: 10,
    discount_message: 'Spend $30 and get 10% off!',
  },
  {
    threshold: 50,
    discount_type: :percent,
    discount_amount: 15,
    discount_message: 'Spend $50 and get 15% off!',
  },
  {
    threshold: 100,
    discount_type: :percent,
    discount_amount: 20,
    discount_message: 'Spend $100 and get 20% off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredDiscountBySpendCampaign
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to each item in
# the cart.
# ================================================================
class TieredDiscountBySpendCampaign
  def initialize(tiers)
    @tiers = tiers.sort_by { |tier| tier[:threshold] }.reverse
  end

  def run(cart)
    applicable_tier = @tiers.find { |tier| cart.subtotal_price >= (Money.new(cents: 100) * tier[:threshold]) }
    return if applicable_tier.nil?

    discount_applicator = DiscountApplicator.new(
      applicable_tier[:discount_type],
      applicable_tier[:discount_amount],
      applicable_tier[:discount_message]
    )

    cart.line_items.each do |line_item|
      next if line_item.variant.product.gift_card?
      discount_applicator.apply(line_item)
    end
  end
end

CAMPAIGNS = [
  TieredDiscountBySpendCampaign.new(SPENDING_THRESHOLDS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá xếp hạng theo số lượng

Sử dụng tập lệnh này để tặng ưu đãi giảm giá khi khách hàng mua số lượng lớn một sản phẩm cụ thể, với ưu đãi giảm giá theo tỷ lệ phần trăm tăng theo số lượng sản phẩm trong giỏ hàng.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm 10% giá trị đơn hàng nếu khách hàng mua từ 2 mũ trở lên hoặc 15% nếu mua từ 5 mũ trở lên.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discount by Quantity
#
# If the total quantity of matching items is greater than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selector' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'tiers' is a list of tiers where:
# - 'quantity' is the minimum quantity you need to buy to
# qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_DISCOUNT_TIERS = [
  {
    product_selector_match_type: :include,
    product_selector_type: :tag,
    product_selectors: ["your_tag"],
    tiers: [
      {
        quantity: 2,
        discount_type: :percent,
        discount_amount: 10,
        discount_message: '10% off for 2+',
      },
      {
        quantity: 5,
        discount_type: :percent,
        discount_amount: 15,
        discount_message: '15% off for 5+',
      },
    ],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredPricingCampaign
#
# If the total quantity of matching items is greater than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
# ================================================================
class TieredPricingCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      applicable_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if applicable_items.nil?

      total_applicable_quantity = applicable_items.map(&:quantity).reduce(0, :+)
      tiers = campaign[:tiers].sort_by { |tier| tier[:quantity] }.reverse
      applicable_tier = tiers.find { |tier| tier[:quantity] <= total_applicable_quantity }

      next if applicable_tier.nil?

      discount_applicator = DiscountApplicator.new(
        applicable_tier[:discount_type],
        applicable_tier[:discount_amount],
        applicable_tier[:discount_message]
      )

      applicable_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  TieredPricingCampaign.new(PRODUCT_DISCOUNT_TIERS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá xếp hạng theo mức chi tiêu sản phẩm

Sử dụng tập lệnh này để cung cấp ưu đãi giảm giá theo tỷ lệ phần trăm tăng theo tổng giá trị của mặt hàng cụ thể trong giỏ hàng.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm 10% nếu khách chi tiêu từ 300.000 đồng trở lên, 15% nếu khách chi tiêu từ 500.000 đồng trở lên và 20% nếu khách chi tiêu từ 1.000.000 đồng trở lên, nhưng chỉ cho những mặt hàng khớp với thẻ nhất định.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discount by Spend Threhsold
#
# If the total amount spent on matching items is greather than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - 'product_selectors' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes).
# - 'tiers' is a list of tiers where:
# - 'threshold' is the minimum dollar amount needed to
# qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_DISCOUNT_TIERS = [
  {
    product_selector_match_type: :exclude,
    product_selector_type: :tag,
    product_selectors: ["your_tag", "another_tag"],
    tiers: [
      {
        threshold: 100,
        discount_type: :percent,
        discount_amount: 10,
        discount_message: 'Spend $100 or more, and get 10% off!',
      },
    ],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredPricingCampaign
#
# If the total amount spent on matching items is greather than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
# ================================================================
class TieredPricingCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      tiers = campaign[:tiers].sort_by { |tier| tier[:threshold] }.reverse
      applicable_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if applicable_items.nil?

      total_applicable_cost = applicable_items.map(&:line_price).reduce(Money.zero, :+)
      applicable_tier = tiers.find { |tier| total_applicable_cost >= (Money.new(cents: 100) * tier[:threshold]) }

      next if applicable_tier.nil?

      discount_applicator = DiscountApplicator.new(
        applicable_tier[:discount_type],
        applicable_tier[:discount_amount],
        applicable_tier[:discount_message]
      )

      applicable_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  TieredPricingCampaign.new(PRODUCT_DISCOUNT_TIERS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá dành cho sản phẩm được gắn thẻ

Sử dụng tập lệnh này để tặng ưu đãi giảm giá cho các mặt hàng được gắn thẻ cụ thể.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm 10% đối với mặt hàng được gắn thẻ discounted.

# ================================ Customizable Settings ================================
# ================================================================
# Discount by Product Tag
#
# Any product that is tagged (or not, depending on the setting
# below) with the entered tag(s) will be discounted by the entered
# amount.
#
# - 'product_tag_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_tags' is a list of product tags for qualified
# products
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_TAG_DISCOUNTS = [
  {
    product_tag_match_type: :include,
    product_tags: ["your_tag", "another_tag"],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: '10% off tagged products!'
  }
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductTagSelector
#
# Finds whether the supplied line item does (or does not) have any
# of the entered tags.
# ================================================================
class ProductTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    (product_tags & @tags).send(@comparator)
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# ProductTagDiscountCampaign
#
# Any "matching" product (by tag) will be discounted by the entered
# amount.
# ================================================================
class ProductTagDiscountCampaign
  def initialize(discounts)
    @discounts = discounts
  end

  def run(cart)
    @discounts.each do |discount|
      product_tag_selector = ProductTagSelector.new(
        discount[:product_tag_match_type],
        discount[:product_tags]
      )

      discount_applicator = DiscountApplicator.new(
        discount[:discount_type],
        discount[:discount_amount],
        discount[:discount_message]
      )

      cart.line_items.each do |line_item|
        next unless product_tag_selector.match?(line_item)
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  ProductTagDiscountCampaign.new(PRODUCT_TAG_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
 campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá cho khách hàng được gắn thẻ

Sử dụng tập lệnh này để cung cấp ưu đãi giảm giá cho khách hàng có thẻ cụ thể.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng ưu đãi giảm giá 20% khi khách hàng có thẻ VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Discounts by Customer Tag
#
# If a customer is tagged (or not, depending on the setting below)
# with the entered tag(s), the entered discount will be applied to
# each item in the cart.
#
# - 'customer_tag_match_type' determines whether we look for the customer
# to be tagged with any of the entered tags or not. Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of tags to identify qualified
# customers
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["VIP"],
    discount_type: :percent,
    discount_amount: 20,
    discount_message: "Discount for VIP customers!",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountForCustomerTagCampaign
#
# If we have a "matching" customer (by tag), the entered discount
# is applied.
# ================================================================
class DiscountForCustomerTagCampaign
  def initialize(discounts)
    @discounts = discounts
  end

  def run(cart)
    return unless cart.customer&.tags

    @discounts.each do |discount|
      customer_tag_selector = CustomerTagSelector.new(discount[:customer_tag_match_type], discount[:customer_tags])

      next unless customer_tag_selector.match?(cart.customer)

      discount_applicator = DiscountApplicator.new(
        discount[:discount_type],
        discount[:discount_amount],
        discount[:discount_message]
      )

      cart.line_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountForCustomerTagCampaign.new(DISCOUNTS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Mua số lượng sản phẩm cụ thể và nhận ưu đãi giảm giá ở lần mua hàng thứ hai

Sử dụng tập lệnh này để tặng ưu đãi giảm giá đối với một mặt hàng cụ thể khi khách hàng mua nhiều hơn một số lượng nhất định.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm giá 50% đối với mặt hàng thứ tư được gắn thẻ discount sau khi mua ba mặt hàng được gắn thẻ discount.

# ================================ Customizable Settings ================================
# ================================================================
# Buy X, Get Y For Z Discount
#
# Buy a certain number of "matching" items, get a certain number
# of the same matching items with the entered discount applied. For
# example:
#
# "Buy 2 products tagged with 'tag', get another product
# tagged with 'tag' for 10% off"
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - This should only be a number (ie. no quotes)
# - ':variant_id' to find products by variant ID
# - This should only be a number (ie. no quotes)
# - ':all' for all products
# - 'product_selectors' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'quantity_to_discount' is the number of products to discount
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
#
# Something to note for the case of running multiple offers is
# that there shouldn't be any overlap between product selection
# as this can lead to extra discounting. For example, you should
# NOT offer "Buy 1 Product X, get 1 50% off", as well as "Buy 2
# Product X, get 1 free"
# ================================================================
BUY_X_GET_Y_FOR_Z = [
  {
    product_selector_match_type: :include,
    product_selector_type: :all,
    product_selectors: nil,
    quantity_to_buy: 1,
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 50,
    discount_message: 'Buy one item, get the second 50% off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# BuyXGetYForZCampaign
#
# Buy a certain number of "matching" items, get a certain number
# of the same matching items with the entered discount applied.
# ================================================================
class BuyXGetYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_items = eligible_items.sort_by { |line_item| -line_item.variant.price }
      quantity_to_buy = campaign[:quantity_to_buy]
      quantity_to_discount = campaign[:quantity_to_discount]
      bundle_size = quantity_to_buy + quantity_to_discount
      number_of_bundles = (eligible_items.map(&:quantity).reduce(0, :+) / bundle_size).floor
      number_of_discountable_items = number_of_bundles * quantity_to_discount

      next unless number_of_discountable_items > 0

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      self.loop_items(
        discount_applicator, cart, eligible_items, number_of_discountable_items, quantity_to_buy, quantity_to_discount
      )
    end
  end

  def loop_items(discount_applicator, cart, line_items, num_to_discount, quantity_to_buy, quantity_to_discount)
    surplus = 0
    bundle_size = quantity_to_buy + quantity_to_discount

    line_items.each do |line_item|
      line_quantity = line_item.quantity + surplus

      if line_quantity > quantity_to_buy
        bundles_per_line = (line_quantity / bundle_size).floor
        take_quantity = bundles_per_line * quantity_to_discount
        surplus += (line_quantity - (bundle_size * bundles_per_line))

        if line_item.quantity > take_quantity
          discount_item = line_item.split(take: take_quantity)
          discount_applicator.apply(discount_item)
          position = cart.line_items.find_index(line_item)
          cart.line_items.insert(position + 1, discount_item)
          num_to_discount -= take_quantity
        else
          discount_applicator.apply(line_item)
          num_to_discount -= line_item.quantity
        end
      else
        surplus += line_quantity
      end

      break if num_to_discount <= 0
    end
  end
end

CAMPAIGNS = [
  BuyXGetYForZCampaign.new(BUY_X_GET_Y_FOR_Z),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Mua theo gói và nhận ưu đãi giảm giá khi mua thêm sản phẩm

Sử dụng tập lệnh này để tặng ưu đãi giảm giá đối với mặt hàng cụ thể nếu khách hàng đã mua nhiều mặt hàng khác.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng một đôi tất miễn phí khi họ mua cả mũ, áo phông và kính râm.

# ================================ Customizable Settings ================================
# ================================================================
# Buy Products VWX, get Product Y for Z Discount
#
# Buy a specific bundle of products, get another product at a
# discount. For example:
#
# "Buy a t-shirt, a hat, and sunglasses, get a free pair of socks"
#
# - 'bundle_items' is a list of the items that comprise the
# bundle, where:
# - 'product_id' is the ID of the product
# - 'quantity_needed' is the quantity necessary to complete
# the bundle
# - 'quantity_to_buy' is the number of bundles needed to qualify
# for a discount product
# - 'discount_product_selector_match_type' determines whether we
# look for products that do or don't match the entered
# selectors. Can be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'discount_product_selector_type' determines how qualifying
# products will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'discount_product_selectors' is a list of identifiers (from
# above) for qualifying products. Product/Variant ID lists
# should only contain numbers (ie. no quotes). If ':all' is
# used, this can also be 'nil'.
# - 'quantity_to_discount' is the number of items to discount
# per offer
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUNDLE_DISCOUNTS = [
  {
    bundle_items: [
      {
        product_id: 1234567890987,
        quantity_needed: 1
      },
      {
        product_id: 1234567890986,
        quantity_needed: 1
      },
    ],
    quantity_to_buy: 1,
    discount_product_selector_match_type: :include,
    discount_product_selector_type: :product_id,
    discount_product_selectors: [1234567890123],
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "Buy Product VWX, get Product Y for 10% off",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# BundleSelector
#
# Finds any items that are part of the entered bundle and saves
# them.
# ================================================================
class BundleSelector
  def initialize(bundle_items)
    @bundle_items = bundle_items.reduce({}) do |acc, bundle_item|
      acc[bundle_item[:product_id]] = {
        cart_items: [],
        quantity_needed: bundle_item[:quantity_needed],
        total_quantity: 0,
      }

      acc
    end
  end

  def build(cart)
    cart.line_items.each do |line_item|
      next unless @bundle_items[line_item.variant.product.id]

      @bundle_items[line_item.variant.product.id][:cart_items].push(line_item)
      @bundle_items[line_item.variant.product.id][:total_quantity] += line_item.quantity
    end

    @bundle_items
  end
end

# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each_with_index do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BundleDiscountCampaign
#
# If the entered bundle is present, the entered discount is
# applied to the entered product.
# ================================================================
class BundleDiscountCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      bundle_selector = BundleSelector.new(campaign[:bundle_items])
      bundle_items = bundle_selector.build(cart)

      next if bundle_items.any? do |product_id, product_info|
        product_info[:total_quantity] < product_info[:quantity_needed]
      end

      num_bundles = bundle_items.map do |product_id, product_info|
        (product_info[:total_quantity] / product_info[:quantity_needed])
      end

      num_bundles = num_bundles.min.floor

      product_selector = ProductSelector.new(
        campaign[:discount_product_selector_match_type],
        campaign[:discount_product_selector_type],
        campaign[:discount_product_selectors],
      )

      discount_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if discount_items.nil?

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, discount_items, (campaign[:quantity_to_discount] * num_bundles))
    end
  end
end

CAMPAIGNS = [
  BundleDiscountCampaign.new(BUNDLE_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá theo gói

Sử dụng tập lệnh này để tặng ưu đãi giảm giá khi khách hàng thêm một nhóm sản phẩm nhất định vào giỏ hàng.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm giá 20% khi họ mua cả áo phông, mũ và kính râm.

# ================================ Customizable Settings ================================
# ================================================================
# Buy Products WXY, get Z Discount
#
# Buy a specific bundle of products, get that bundle at a
# discount. For example:
#
# "Buy a t-shirt, a hat, and sunglasses, get 20% off each"
#
# - 'bundle_items' is a list of the items that comprise the
# bundle, where:
# - 'product_id' is the ID of the product
# - 'quantity_needed' is the quantity necessary to complete
# the bundle
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUNDLE_DISCOUNTS = [
  {
    bundle_items: [
      {
        product_id: 1234567890987,
        quantity_needed: 1
      },
      {
        product_id: 1234567890986,
        quantity_needed: 1
      },
    ],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "Buy Product X and Product Y, get 10% off!",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# BundleSelector
#
# Finds any items that are part of the entered bundle and saves
# them.
# ================================================================
class BundleSelector
  def initialize(bundle_items)
    @bundle_items = bundle_items.reduce({}) do |acc, bundle_item|
      acc[bundle_item[:product_id]] = {
        cart_items: [],
        quantity_needed: bundle_item[:quantity_needed],
        total_quantity: 0,
      }

      acc
    end
  end

  def build(cart)
    cart.line_items.each do |line_item|
            next if line_item.line_price_changed?
      next unless @bundle_items[line_item.variant.product.id]

      @bundle_items[line_item.variant.product.id][:cart_items].push(line_item)
      @bundle_items[line_item.variant.product.id][:total_quantity] += line_item.quantity
    end

    @bundle_items
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each_with_index do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BundleDiscountCampaign
#
# If the entered bundle is present, the entered discount is
# applied to each item in the bundle.
# ================================================================
class BundleDiscountCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      bundle_selector = BundleSelector.new(campaign[:bundle_items])
      bundle_items = bundle_selector.build(cart)

      next if bundle_items.any? do |product_id, product_info|
        product_info[:total_quantity] < product_info[:quantity_needed]
      end

      num_bundles = bundle_items.map do |product_id, product_info|
        (product_info[:total_quantity] / product_info[:quantity_needed])
      end

      num_bundles = num_bundles.min.floor

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)

      bundle_items.each do |product_id, product_info|
        discount_loop.loop_items(
          cart,
          product_info[:cart_items],
          (product_info[:quantity_needed] * num_bundles),
        )
      end
    end
  end
end

CAMPAIGNS = [
  BundleDiscountCampaign.new(BUNDLE_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Ưu đãi giảm giá mua 1 tặng 1 (BOGO)

Sử dụng tập lệnh này để tặng ưu đãi giảm giá theo tỷ lệ phần trăm đối với một mặt hàng khi khách hàng mua một số lượng nhất định của một sản phẩm khác.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng cho khách hàng ưu đãi giảm giá 10% để mua mũ khi khách hàng mua 2 áo phông.

# ================================ Customizable Settings ================================
# ================================================================
# Buy V of Product W, Get X of Product Y for Z Discount
#
# Buy a certain number of "matching" items, get a certain number
# of a different set of "matching" items with the entered discount
# applied. For example:
#
# "Buy 2 t-shirts, get 1 hat for 10% off"
#
# - 'buy_product_selector_match_type' determines whether we look
# for products that do or don't match the entered selectors.
# Can be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'buy_product_selector_type' determines how eligible products
# will be identified. Can be:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'buy_product_selectors' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'get_selector_match_type' is the same idea as the "Buy"
# version above
# - 'get_product_selector_type' is the same idea as the "Buy"
# version above
# - 'get_product_selectors' is the same idea as the "Buy"
# version above
# - 'quantity_to_discount' is the number of products to discount
# - 'allow_incomplete_bundle' determines whether a portion of
# the items to discount can be discounted, or all items
# need to be present. Can be:
# - 'true'
# - 'false'
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUYVOFW_GETXOFY_FORZ = [
  {
    buy_product_selector_match_type: :include,
    buy_product_selector_type: :tag,
    buy_product_selectors: ["your_tag", "another_tag"],
    quantity_to_buy: 1,
    get_product_selector_match_type: :include,
    get_product_selector_type: :tag,
    get_product_selectors: ["your_other_tag", "a_different_tag"],
    quantity_to_discount: 1,
    allow_incomplete_bundle: false,
    discount_type: :percent,
    discount_amount: 100,
    discount_message: 'Buy a Product X, get a Product Y free!',
  },
  {
    buy_product_selector_match_type: :include,
    buy_product_selector_type: :id,
    buy_product_selectors: [1234567890987, 1234567890986],
    quantity_to_buy: 1,
    get_product_selector_match_type: :include,
    get_product_selector_type: :id,
    get_product_selectors: [1234567890985, 1234567890984],
    quantity_to_discount: 1,
    allow_incomplete_bundle: false,
    discount_type: :dollar,
    discount_amount: 10,
    discount_message: 'Buy a Product X, get $10 off a Product Y!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BuyVofWGetXofYForZCampaign
#
# Buy a certain number of "matching" items, get a certain number
# of a different set of "matching" items with the entered discount
# applied.
# ================================================================
class BuyVofWGetXofYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      buy_product_selector = ProductSelector.new(
        campaign[:buy_product_selector_match_type],
        campaign[:buy_product_selector_type],
        campaign[:buy_product_selectors],
      )

      get_product_selector = ProductSelector.new(
        campaign[:get_product_selector_match_type],
        campaign[:get_product_selector_type],
        campaign[:get_product_selectors],
      )

      buy_items = []
      get_items = []

      cart.line_items.each do |line_item|
        buy_items.push(line_item) if buy_product_selector.match?(line_item)
        get_items.push(line_item) if get_product_selector.match?(line_item)
      end

      next if buy_items.empty? || get_items.empty?

      get_items = get_items.sort_by { |line_item| line_item.variant.price }
      quantity_to_buy = campaign[:quantity_to_buy]
      quantity_to_discount = campaign[:quantity_to_discount]
      buy_offers = (buy_items.map(&:quantity).reduce(0, :+) / quantity_to_buy).floor

      if campaign[:allow_incomplete_bundle]
        number_of_bundles = buy_offers
      else
        get_offers = (get_items.map(&:quantity).reduce(0, :+) / quantity_to_discount).floor
        number_of_bundles = [buy_offers, get_offers].min
      end

      number_of_discountable_items = number_of_bundles * quantity_to_discount

      next unless number_of_discountable_items > 0

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, get_items, number_of_discountable_items)
    end
  end
end

CAMPAIGNS = [
  BuyVofWGetXofYForZCampaign.new(BUYVOFW_GETXOFY_FORZ),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Mua một số lượng sản phẩm cụ thể với giá trị nhất định

Sử dụng tập lệnh này để bán một số sản phẩm với giá đã chọn.

Ví dụ: Bạn có thể sử dụng tập lệnh này để bán cho khách hàng 2 áo phông trị giá 200.000 đồng.

# ================================ Customizable Settings ================================
# ================================================================
# Buy X of Product Y for $Z
#
# Buy a certain number of "matching" items for a specific price.
# For example:
#
# "Buy 2 t-shirts for $20"
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selectors' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should
# only contain numbers (ie. no quotes). If ':all' is used,
# this can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'final_price` is the amount to charge for all products that
# are part of the offer
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUY_X_GET_Y_FOR_Z = [
  {
    product_selector_match_type: :include,
    product_selector_type: :tag,
    product_selectors: ["your_tag"],
    quantity_to_buy: 2,
    final_price: 100,
    discount_message: 'Buy 2 for $20',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DollarDiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DollarDiscountApplicator
  def initialize(discount_message)
    @discount_message = discount_message
  end

  def apply(line_item, discount_amount)
    new_line_price = line_item.line_price - discount_amount
    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# BuyXOfYForZCampaign
#
# Buy a certain number of "matching" items for a specific price.
# ================================================================
class BuyXOfYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_item_count = eligible_items.map(&:quantity).reduce(0, :+)
      quantity_to_buy = campaign[:quantity_to_buy]
      number_of_offers = (eligible_item_count / quantity_to_buy).floor

      next unless number_of_offers > 0

      number_of_discountable_items = number_of_offers * quantity_to_buy
      total_offer_price = Money.new(cents: 100) * (number_of_offers * campaign[:final_price])
      discount_applicator = DollarDiscountApplicator.new(campaign[:discount_message])

      self.loop_items(cart, eligible_items, number_of_discountable_items, total_offer_price, discount_applicator)
    end
  end

  def loop_items(cart, line_items, num_to_discount, total_price, discount_applicator)
    current_price = Money.zero
    avg_price = total_price * (1 / num_to_discount)

    line_items = line_items.sort_by { |line_item| line_item.variant.price }

    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        discount_amount = split_line_item.line_price - (total_price - current_price)
        discount_applicator.apply(split_line_item, discount_amount)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      elsif line_item.quantity == num_to_discount
        discount_amount = line_item.line_price - (total_price - current_price)
        discount_applicator.apply(line_item, discount_amount)
        break
      else
        if line_item.variant.price <= avg_price
          current_price += line_item.line_price
        else
          discount_amount = (line_item.variant.price - avg_price) * line_item.quantity
          current_price += (line_item.line_price - discount_amount)
          discount_applicator.apply(line_item, discount_amount)
        end

        num_to_discount -= line_item.quantity
      end
    end
  end
end

CAMPAIGNS = [
  BuyXOfYForZCampaign.new(BUY_X_GET_Y_FOR_Z),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Tặng quà miễn phí khi mua hàng

Sử dụng tập lệnh này để tặng ưu đãi giảm giá đối với sản phẩm cụ thể nếu tổng giá trị giỏ hàng lớn hơn một số tiền nhất định.

Ví dụ: Bạn có thể sử dụng tập lệnh này để tặng quà miễn phí cho khách hàng nếu họ chi tiêu nhiều hơn 750.000 đồng.

# ================================ Customizable Settings ================================
# ================================================================
# Spend $X, get Product Y for Z Discount
#
# If the cart total is greater than (or equal to) the entered
# threshold (less the discounted amount), the entered number of
# "matching" items is discounted by the entered amount.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selector' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should
# only contain numbers (ie. no quotes). If ':all' is used,
# this can also be 'nil'.
# - 'threshold' is the dollar amount needed to spend to qualify
# - 'quantity_to_discount' is the number of items to discount
# if qualified
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDX_GETY_FORZ = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890123],
    threshold: 75,
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 100,
    discount_message: 'Spend $75 or more and get a free Product X!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# SpendXGetYForZCampaign
#
# If the cart total is greater than (or equal to) the entered
# threshold (less the discounted amount), the entered number of
# "matching" items is discounted by the entered amount.
# ================================================================
class SpendXGetYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      threshold = Money.new(cents: 100) * campaign[:threshold]

      next if cart.subtotal_price < threshold

      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_items = eligible_items.sort_by { |line_item| line_item.variant.price }
      num_to_discount = campaign[:quantity_to_discount]
      cart_total = cart.subtotal_price

      eligible_items.each do |line_item|
        break if num_to_discount <= 0

        if line_item.quantity > num_to_discount
          cart_total -= line_item.variant.price * num_to_discount
          break
        else
          cart_total -= line_item.line_price
          num_to_discount -= line_item.quantity
        end
      end

      next if cart_total < threshold

      discount_applicator = discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, eligible_items, campaign[:quantity_to_discount])
    end
  end
end

CAMPAIGNS = [
  SpendXGetYForZCampaign.new(SPENDX_GETY_FORZ),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Vô hiệu hóa mã giảm giá

Sử dụng tập lệnh này để không cho phép sử dụng mã giảm giá trong quá trình thanh toán.

Ví dụ: Bạn có thể sử dụng tập lệnh này để ngăn khách hàng sử dụng mã giảm giá khi cửa hàng đang có đợt giảm giá.

# ================================ Customizable Settings ================================
# ================================================================
# Disable Discount Code Use
#
# Any discount codes will be rejected with the entered message.
#
# - 'REJECTION_MESSAGE' is the message to show when a discount
# code is rejected
# ================================================================
REJECTION_MESSAGE = 'Discount codes cannot be used during this sale'

# ================================ Script Code (do not edit) ================================
# ================================================================
# DisableDiscountCodesCampaign
#
# Any discount codes will be rejected with the entered message.
# ================================================================
class DisableDiscountCodesCampaign
  def initialize(rejection_message)
    @rejection_message = rejection_message
  end

  def run(cart)
    return if cart.discount_code.nil?

    cart.discount_code.reject(message: @rejection_message)
  end
end

CAMPAIGNS = [
  DisableDiscountCodesCampaign.new(REJECTION_MESSAGE),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Bạn đã sẵn sàng bán hàng với Shopify?

Dùng thử miễn phí