Epson TM-m30III receipt printer
On this page
Requirements
To use this hardware with your Shopify store, you need to meet the following requirements:
- You need to use the Shopify POS app.
- You need to have a compatible iPad or iPhone that's running iOS 15 or later, or have a compatible Android device that's running Android 10 or later.
For USB connection, you need a USB cable with USB-C to USB-A or USB-C connections, depending on the device you want to connect. USB connection is supported only on Android.
For an Ethernet connection, you need an Ethernet cable.
Where to buy the Epson TM-m30III receipt printer
The Epson TM-m30III receipt printer and printer paper are available from the Shopify Hardware Store in supported countries.
If you're in an unsupported country and want to use the Epson TM-m30III receipt printer, then you must purchase it from a third party.
For thermal roll paper specifications and an explanation of how to load the receipt printer, refer to the guide in the manufacturer's hardware manual.
Plug in your Epson TM-m30III receipt printer
Before you can use the Epson TM-m30III receipt printer, you need to connect your printer to the power supply.
Steps:
- Remove the panel on the back of the printer.
- Plug one end of the power cable into the back of your receipt printer.
- Plug the other end of the cable into a power outlet and turn on the printer.
- Reattach the back panel of the printer.
If the paper is loaded, then a diagnostic report prints.
Pair and connect the Epson TM-m30III receipt printer with your POS device
To use the Epson TM-m30III receipt printer with Shopify POS, you need to pair the printer with your device through Shopify POS. After the printer and device are paired, the printer connects to the device automatically whenever both are powered on and in range.
You can connect the printer with multiple different connection methods:
- Bluetooth
- USB (Android only)
- Wi-Fi (Android and POS Go only)
- Ethernet/LAN
After connecting your printer, don't forget to:
- Set it as the default printer (optional)
- Print a test receipt
- Test the connection to the cash drawer (if applicable)
Pair and connect the Epson TM-m30III receipt printer with Bluetooth
You can connect your printer using Bluetooth and an iPhone, iPad, or Android.
Steps:
- Connect your printer to the power supply.
- Load receipt paper.
- Open the top panel for loading paper.
- With the panel open, press and hold the button to feed paper until the paper light flashes. Release the button and close the panel.
- An instruction sheet prints. Quickly press and release the button one time to feed the paper into the printer.
- Press and hold the button for around 1 second to feed the paper into the printer. A Bluetooth status sheet prints and the Bluetooth light flashes.
- Tap Done.
- Confirm that your printer displays as connected under Receipt Printers.
Pair and connect the Epson TM-m30III receipt printer with USB
If you're using a POS Tablet Stand (USB-C), then depending on the tablet model you're using, you might experience issues. To learn more about supported Android tablets, refer to Shopify POS Support on Android.
You can connect your printer using a USB cable and an Android device.
Steps:
- Remove the back panel of the printer.
- Remove the bottom panel of the printer.
- Connect your printer to the power supply.
- Connect a USB-C connection to the printer's USB-PD port, and either a USB-C connection to your device, or a USB-A connection to a USB hub or a retail stand.
- After a few moments, the POS app connects to the printer. If prompted by the device, then allow the printer connection.
- Tap Done.
- Confirm that your printer displays as connected under Receipt Printers.
- Reattach the bottom panel and back panel of the printer.
Pair and connect the Epson TM-m30III receipt printer with Wi-Fi
You can connect your printer using Wi-Fi and an Android or POS Go device. Ensure that Bluetooth is activated on your POS device and Bluetooth permissions are granted to the POS app before connecting using Wi-Fi.
Steps:
- Remove the back panel of the printer.
- Remove the bottom panel of the printer.
- Connect your printer to the power supply.
- Load receipt paper.
- The POS scans for the printer. When the POS locates an available printer hotspot, confirm that the serial number and model of the printer are correct, and then tap Connect.
- Optional: If the POS can't find the printer, then tap Scan again.
- Optional: If the POS still can't find the printer, then tap Troubleshooting and follow the instructions to ensure your printer is in SimpleAP mode.
- The POS connects to the printer. When it connects, tap Complete Wi-Fi details.
- Complete the Wi-Fi details for your network:
- Confirm the Network security type.
- Confirm the Network name.
- Enter the Wi-Fi Password.
- Tap Connect.
- A list of Wi-Fi networks available to your device display. Tap your Wi-Fi network, and then tap Done.
- Tap Done to complete the setup. The printer might take a few minutes to finish setting up and connecting to the POS.
Pair and connect the Epson TM-m30III receipt printer with Ethernet/LAN
You can connect your printer using an Ethernet cable and an iPhone, iPad, or Android.
Steps:
- Remove the back panel of the printer.
- Remove the bottom panel of the printer.
- Load receipt paper.
- Connect your printer to the power supply.
- Connect one end of the Ethernet cable to the printer and one to either your router or LAN connection. The printer prints a status sheet after the network is detected.
- After a few moments, the POS app connects to the printer.
- Tap Done.
- Confirm that your printer displays as connected under Receipt Printers.
- Reattach the bottom panel and back panel of the printer.
ERROR indicator is blinking red
This is caused when there is no paper present in the printer. Open the printer, replace the paper, and close the lid. The ERROR indicator should stop blinking and the READY indicator should light up.
Paper jams
If you feed the paper into the receipt printer at an angle, then a paper jam is likely to happen. If this happens, then turn off the printer, open it up, and feed the paper in again.
If you're trying to make your receipt narrower than the specified 3 inch width, then make sure that you use the divider provided. Don't fold the paper when you feed it into the printer.
Customizing receipts
You can customize the basic receipt layout and the transaction description.
Factory reset the Epson TM-m30III receipt printer
A factory reset can help resolve bluetooth connection issues.
Steps:
- Turn off the printer by pressing the power key on the top of the printer.
- Locate the SW reset button on the back of the printer next to the ethernet plug.
- Use a ball point pen to hold the SW reset button down for 5 seconds.
- Keep holding the SW reset button while you turn the printer back on.
- A paper prints that says “Resetting to Factory Default”.
- Release the SW reset button. This completes the factory reset.