iPad stands for Shopify POS
Shopify supports a range of dedicated iPad stands to enable easier viewing and interaction, whether you're standing at a counter or walking around your store.
When you buy a retail custom kit from Shopify, you can specify the type of stand you need when you place your order.
Shopify Retail Stand for iPads
The Shopify Retail Stand is available only for merchants in the United States and Canada.
The Shopify Retail Stand is designed for countertop checkouts.
The stand has two parts: a case for the iPad and a base.
To assemble the stand, insert the iPad into the case and then attach the case to the base. To permanently bolt the stand to a countertop, you can purchase a mounting kit from the Shopify Hardware Store in the United States or Canada. The mounting kit is automatically included when you buy the Shopify Retail Custom Kit in the United States or Canada.
The iPad charges when it is on the base. You can also charge other devices, such as the dock for the Tap & Chip card reader, by using the USB-A ports on the base. The ports are best for charging devices with smaller batteries, such as card readers and phones.
When a customer is paying, you can tilt the iPad towards them so that they can verify the transaction or enter their email address.
The Shopify Retail Stand for iPad 9.7" is compatible with the following 9.7 inch iPads:
iPad (5th and 6th generation)
iPad Pro (9.7 inch)
iPad Air 2
The Shopify Retail Stand for iPad 10.2"/Air 10.5" is compatible with the following iPads:
iPad (7th and 8th generation)
iPad Air (3rd Generation)
Set up the Shopify Retail Stand
Remove the end cap from the case.
Insert the iPad into the case.
Replace the end cap.
Optional: Mount the stand to a countertop by using two M5 bolts. You need to drill holes in the countertop and insert the bolts from below into the stand.
Plug in the power adapter.
To attach the case, place it above the charging connectors on the base. Line up the magnets on the case and the base until they connect.
On the back of the base, move the slider button to the lock position to prevent the case from being removed from the base.
@Rest iPad stand by Heckler Design
Model number: HDAR118 or H234 - available only in Canada.
The @Rest stand fits any iPad and enables you to use a viewing angle of 30 or 60 degrees. It's made of heavy steel and is designed to stay put wherever you use it most.
Set up the @Rest iPad stand
Follow these steps to set up the Rest iPad stand.
Attach the four adhesive feet to the base of the stand, to protect your counter top.
Turn the stand right-way up and decide which side you're going to rest your iPad on. One gives you a viewing angle of 30 degrees, and the other 60 degrees.
Insert the two resting pegs in the holes on the side you've chosen.
Optional: You can stick the large adhesive pad to the stand before putting the iPad in place, but this isn't essential.
For more information, refer to the setup video on the manufacturer's website.
WindFall stands for iPad Air and iPad mini
Model number (iPad 9.7"): H458 - available on all Shopify hardware stores.
Model number (iPad Mini): H434 - available on all Shopify hardware stores.
Model number (iPad 10.2"): H600 - available on all Shopify hardware stores.
Model number (iPad 10.5"): H498 - available on all Shopify hardware stores.
Model number (iPad 12.9"): H384 - available on all Shopify hardware stores.
Model number (iPad 12.9" 3rd Gen): H549 - available only in Canada and the United States.
Shopify supports the listed WindFall iPad Air stands and WindFall iPad mini stand by Heckler Design. The stands incorporate a concealed cable routing so that you can keep your iPad powered-up all day.
Set up the WindFall stand
The WindFall stand comes with different accessories so that you can choose how to set up your POS system. If your stand comes with a PivotTable, then we recommend that you install it rather than attaching the rubber feet. The PivotTable swivels your Shopify POS screen through 360 degrees, making it easier to rotate your iPad towards a customer during the checkout process.
For more information about to install your iPad stand, consult the Windfall iPad Air stand video on Youtube.
If the PivotTable doesn't rotate
You might have the plastic feet and the PivotTable installed at the same time. Remove the feet, because they prevent the PivotTable from rotating.
Locking your Windfall iPad stand to a surface to prevent theft
The lock attaches to the Windfall iPad stand and the cable wraps around a physical surface (for example, a table leg). Each lock is individually keyed for maximum protection.
Sticking your Windfall iPad stand to a flat surface
For long-term placement, use the double-sided, peel-and-stick disc that comes with the stand.
For a non-permanent solution, the PivotTable uses suction to adhere to a surface. By gently pressing down on the PivotTable, you can create enough suction to stick the Windfall iPad stand to a flat surface.
More accessories for the iPad stand
Shopify doesn't sell accessories for the stands, but you can buy them from Heckler Design or from a general hardware store.
The Vault iPad Pro Stand 12.9"
The Vault Stand for iPad Pro allows you to securely mount your device where it is most needed. The stand has integrated cable management to securely hide your device's cables and comes with both a rotational base and stability base.
The Vault iPad Pro Stand is compatible with 3rd and 4th generation 12.9 inch iPad Pros.
Set up the Vault stand
The Vault iPad Pro stand can be configured in slightly different ways to meet your store's needs.
For the most up-to-date instructions about installing your iPad stand, consult the Vault instructional guides.