Voorbeelden van scripts voor verzendtarieven

Verzendscripts hebben een interactie met verzendtarieven en kunnen de titel, zichtbaarheid, weergave en prijs van een tarief wijzigen. Deze scripts worden uitgevoerd wanneer je klant bij het afrekenen de pagina met verzendopties opent.

Maak een nieuw script met een leeg sjabloon om de sjablonen op deze pagina te gebruiken.

Stappen:

  1. Ga in het Shopify-beheercentrum naar Apps > Script Editor.
  2. Klik op Script aanmaken.
  3. Klik op Verzendtarieven.
  4. Selecteer Leeg sjabloon en klik daarna op Script aanmaken.
  5. Wis in het gedeelte Ruby-broncode de standaard coderegel. Output.cart = Input.cart
  6. Kopieer een script van deze pagina en plak het in het gedeelte Ruby-broncode.
  7. Bewerk het gedeelte Aanpasbare instellingen van het script zodat het in je winkel kan werken.
  8. Test je script Raadpleeg voor meer informatie Shopify-scripts testen en debuggen.
  9. Na het testen: - klik op Concept opslaan om een niet-gepubliceerd concept van het script op te slaan, of
    • klik op Save and publish om het script te maken en te publiceren

Voeg een bericht toe voor een tariefnaam voor specifieke provincies of landen

Gebruik dit script om een bericht toe te voegen aan de verzendtarieven die bij het afrekenen aan klanten worden weergegeven.

Je kunt dit script bijvoorbeeld gebruiken om een bericht toe te voegen aan de verzendtarieven van Ontario waarin staat Due to COVID-19 disruptions, shipping may take longer than normal.

# ================================ Customizable Settings ================================
# ================================================================
# Add Message to Rate Names for Province/Country
#
# If the cart's shipping address province/country matches
# the entered settings, all shipping rates will have the
# entered message appended to their name
#
# - 'country_code' is a 2-character abbreviation for the
# applicable country
# - 'province_code' is a list of 2-character abbreviations for
# the applicable provinces
# - 'message' is the message to append to rate names
# ================================================================
RATE_MESSAGE_FOR_PROVINCE_COUNTRY = [
  {
    country_code: "US",
    province_codes: ["NY", "WA"],
    message: "Due to COVID-19 disruptions, shipping may take longer than normal."
  },
  {
    country_code: "CA",
    province_codes: ["BC", "ON"],
    message: "Due to COVID-19 disruptions, shipping may take longer than normal."
  }
]

# ================================ Script Code (do not edit) ===============================
# ================================================================
# ProvinceSelector
#
# Finds whether the supplied province code matches the entered
# strings
# ================================================================
class ProvinceSelector
  def initialize(provinces)
    @provinces = provinces.map { |province| province.upcase.strip }
  end

  def match?(province_code)
    @provinces.any? { |province| province_code.upcase.strip == province }
  end
end

# ================================================================
# AddMessageToRateForProvinceCountryCampaign
#
# If the cart's shipping address country/province matches the
# entered settings, all shipping rates will have the entered
# message appended to their name
# ================================================================
class AddMessageToRateForProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.shipping_address.nil?

    address = cart.shipping_address

    @campaigns.each do |campaign|
      next unless address.country_code.upcase.strip == campaign[:country_code].upcase.strip

      province_selector = ProvinceSelector.new(campaign[:province_codes])

      next unless province_selector.match?(address.province_code)

      shipping_rates.each do |shipping_rate|
        rate_name = shipping_rate.name + ' - ' + campaign[:message]
        shipping_rate.change_name(rate_name)
      end
    end
  end
end

CAMPAIGNS = [
  AddMessageToRateForProvinceCountryCampaign.new(RATE_MESSAGE_FOR_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Tarieven voor een specifieke postcode, provincie of land weergeven

Gebruik dit script om klanten van specifieke locatie het tarief te laten zien dat alleen jij invoert en andere verzendtarieven verbergt.

Je kunt dit script bijvoorbeeld gebruiken om alleen een specifiek Verzendtarief weer te geven voor klanten in Californië, waarbij alle andere tarieven worden verborgen.

# ================================ Customizable Settings ================================
# ================================================================
# Show Rate(s) for Zip/Province/Country
#
# If the cart's shipping address country/province/zip match the
# entered settings, the entered rate(s) are shown, and all other
# rates are hidden. Otherwise, the entered rate(s) are hidden.
#
# - 'country_code' is a 2-character abbreviation for the
# applicable country
# - 'province_code' is a list of 2-character abbreviations for
# the applicable provinces
# - 'zip_code_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'zip_codes' is a list of strings to identify zip codes
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of strings to identify rates
# - if using ':all' above, this can be set to 'nil'
# ================================================================
SHOW_RATES_FOR_ZIP_PROVINCE_COUNTRY = [
  {
    country_code: "CA",
    province_code: "BC",
    zip_code_match_type: :partial,
    zip_codes: ["V8T"],
    rate_match_type: :exact,
    rate_names: ["Apparel Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ZipCodeSelector
#
# Finds whether the supplied zip code matches any of the entered
# strings.
# ================================================================
class ZipCodeSelector
  def initialize(match_type, zip_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @zip_codes = zip_codes.map { |zip_code| zip_code.upcase.strip }
  end

  def match?(zip_code)
    @zip_codes.any? { |zip| zip_code.to_s.upcase.strip.send(@comparator, zip) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# ShowRatesForZipProvinceCountryCampaign
#
# If the cart's shipping address zip/province/country match the
# entered settings, the entered rate(s) are shown, and all other
# rates are hidden. Otherwise, the entered rate(s) are hidden.
# ================================================================
class ShowRatesForZipProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    @campaigns.each do |campaign|
      zip_code_selector = ZipCodeSelector.new(campaign[:zip_code_match_type], campaign[:zip_codes])
      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])

      if address.nil?
        full_match = false
      else
        country_match = address.country_code.upcase.strip == campaign[:country_code].upcase.strip
        province_match = address.province_code.upcase.strip == campaign[:province_code].upcase.strip
        zip_match = zip_code_selector.match?(address.zip)
        full_match = country_match && province_match && zip_match
      end

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate) != full_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowRatesForZipProvinceCountryCampaign.new(SHOW_RATES_FOR_ZIP_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Tarieven verbergen voor een specifieke postcode, provincie of land

Gebruik dit script om specifieke tarieven voor klanten op een specifieke locatie te verbergen.

Je kunt dit script bijvoorbeeld gebruiken om een specifiek verzendtarief voor klanten in Californië te verbergen, waarbij alle andere tarieven worden weergegeven waarvoor ze wel in aanmerking komen.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for Zip/Province/Country
#
# If the cart's shipping address country/province/zip match the
# entered settings, the entered rate(s) are hidden.
#
# - 'country_code' is a 2-character abbreviation for the
# applicable country
# - 'province_code' is a list of 2-character abbreviations for
# the applicable provinces
# - 'zip_code_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'zip_codes' is a list of strings to identify zip codes
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of strings to identify rates
# - if using ':all' above, this can be set to 'nil'
# ================================================================
HIDE_RATES_FOR_ZIP_PROVINCE_COUNTRY = [
  {
    country_code: "CA",
    province_code: "BC",
    zip_code_match_type: :partial,
    zip_codes: ["V8T"],
    rate_match_type: :exact,
    rate_names: ["Apparel Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ZipCodeSelector
#
# Finds whether the supplied zip code matches any of the entered
# strings.
# ================================================================
class ZipCodeSelector
  def initialize(match_type, zip_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @zip_codes = zip_codes.map { |zip_code| zip_code.upcase.strip }
  end

  def match?(zip_code)
    @zip_codes.any? { |zip| zip_code.to_s.upcase.strip.send(@comparator, zip) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForZipProvinceCountryCampaign
#
# If the cart's shipping address zip/province/country match the
# entered settings, the entered rate(s) are hidden.
# ================================================================
class HideRatesForZipProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      zip_code_selector = ZipCodeSelector.new(campaign[:zip_code_match_type], campaign[:zip_codes])

      country_match = address.country_code.upcase.strip == campaign[:country_code].upcase.strip
      province_match = address.province_code.upcase.strip == campaign[:province_code].upcase.strip
      zip_match = zip_code_selector.match?(address.zip)

      next unless country_match && province_match && zip_match

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForZipProvinceCountryCampaign.new(HIDE_RATES_FOR_ZIP_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Verberg tarieven voor specifieke producten in bepaalde landen

Gebruik dit script om tarieven voor klanten te verbergen voor een specifieke locatie wanneer ze een specifiek artikel kopen.

Je kunt dit script bijvoorbeeld gebruiken om een specifiek verzendtarief voor klanten in Californië te verbergen als ze een t-shirt kopen.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for Product/Country
#
# If the cart contains any "matching" items, and the shipping
# address country matches the entered country, the entered rate(s)
# are hidden.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selectors' is a list of tags or IDs to identify
# associated products
# - 'country_codes' is a list of country code abbreviations
# - ie. United States would be `US`
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of strings to identify rates
# - if using ':all' above, this can be set to 'nil'
# ================================================================
HIDE_RATES_FOR_PRODUCT_AND_COUNTRY = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890987, 1234567890986],
    country_codes: ["CA"],
    rate_match_type: :all,
    rate_names: nil,
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if self.respond_to?(@selector_type)
      self.send(@selector_type, line_item)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end

  def tag(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@selectors & product_tags).send(@comparator)
  end

  def type(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
  end

  def vendor(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
  end

  def product_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
  end

  def variant_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.id)
  end

  def all(line_item)
    true
  end
end

# ================================================================
# CountrySelector
#
# Finds whether the supplied country code matches the entered
# string
# ================================================================
class CountrySelector
  def initialize(countries)
    @countries = countries.map { |country| country.upcase.strip }
  end

  def match?(country_code)
    @countries.any? { |country| country_code.upcase.strip == country }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForProductCountryCampaign
#
# If the cart contains any "matching" items, and the shipping
# address country matches the entered country, the entered rate(s)
# are hidden.
# ================================================================
class HideRatesForProductCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      country_selector = CountrySelector.new(campaign[:country_codes])
      product_match = cart.line_items.any? { |line_item| product_selector.match?(line_item) }
      country_match = country_selector.match?(address.country_code)

      next unless product_match && country_match

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names],
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForProductCountryCampaign.new(HIDE_RATES_FOR_PRODUCT_AND_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Tarieven verbergen voor leveringen aan postbussen

Gebruik dit script om tarieven voor klanten te verbergen als hun bezorgadres een postbus is.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for PO Box addresses
#
# If the shipping address contains any of the entered "PO Box"
# identifiers, the entered rate(s) are hidden.
#
# - 'po_box_triggers' is a list of possible strings for a PO
# Box address
# - 'province_codes' is a list of province/state abbreviations where
# we care about PO Boxes
# - 2 character abbreviation
# - 'country_code' is the country abbreviation to match the
# provinces above:
# - 2 character abbreviation
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of rates to show/hide if the above
# conditions are met
# ================================================================
HIDE_RATES_FOR_PO_BOX = [
  {
    po_box_triggers: [
      "po box", "post office", "p o box", "p.o.box", "p.o. box", "p.o box", "pobox",
      "post office box", "post box", "p. o. box", "po. box", "postal box",
    ],
    province_codes: ["BC", "AB"],
    country_code: "CA",
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProvinceSelector
#
# Finds whether the supplied province code matches the entered
# strings.
# ================================================================
class ProvinceSelector
  def initialize(provinces)
    @provinces = provinces.map { |province| province.upcase.strip }
  end

  def match?(province_code)
    @provinces.any? { |province| province_code.upcase.strip == province }
  end
end

# ================================================================
# AddressSelector
#
# Finds whether the supplied address contains any of the entered
# strings.
# ================================================================
class AddressSelector
  def initialize(triggers)
    @triggers = triggers.map { |trigger| trigger.downcase.strip }
  end

  def match?(address)
    address_fields = [address.address1, address.address2].map do |line|
      line.nil? ? "" : line.downcase
    end

    address_fields = address_fields.join(" ")
    @triggers.any? { |trigger| address_fields.include?(trigger) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForPOBoxCampaign
#
# If the shipping address contains any of the entered "PO Box"
# identifiers, the entered rate(s) are hidden.
# ================================================================
class HideRatesForPOBoxCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      country_match = address.country_code.upcase.strip == campaign[:country_code]
      province_match = ProvinceSelector.new(campaign[:province_codes]).match?(address.province_code)
      address_match = AddressSelector.new(campaign[:po_box_triggers]).match?(address)

      next unless country_match && province_match && address_match

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names],
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForPOBoxCampaign.new(HIDE_RATES_FOR_PO_BOX),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Toon tarieven per klant-tag

Gebruik dit script om tarieven aan specifieke klanten weer te geven.

Je kunt dit script bijvoorbeeld gebruiken om een speciaal verzendtarief aan te bieden aan klanten met de tag VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Show Rate(s) for Customer Tag
#
# If a customer is tagged (or not, depending on the setting below)
# with the entered tag(s), the entered rate(s) will be shown, and
# all others will be hidden. Otherwise, the entered rate(s) will
# be hidden.
#
# - 'customer_tag_match_type' determines whether we look for the
# customer to be tagged with any of the entered tags or not.
# Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of customer tags to trigger the
# campaign
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'rate_names' is a list of strings to identify rates
# ================================================================
SHOW_RATES_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# ShowRateForCustomerTagCampaign
#
# If a customer is tagged (or not, depending on the setting below)
# with the entered tag(s), the entered rate(s) will be shown, and
# all others will be hidden. Otherwise, the entered rate(s) will
# be hidden.
# ================================================================
class ShowRateForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(
        campaign[:customer_tag_match_type],
        campaign[:customer_tags]
      )

      customer_match = cart.customer.nil? ? false : customer_tag_selector.match?(cart.customer)

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names]
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate) != customer_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowRateForCustomerTagCampaign.new(SHOW_RATES_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Tarieven opnieuw ordenen

Gebruik dit script om de standaard volgorde te wijzigen waarin de verzendtarieven aan je klanten worden aangeboden.

# ================================ Customizable Settings ================================
# ================================================================
# The order in which you would like your rates to display
# ================================================================
DESIRED_RATE_ORDER = [
  "Shipping Rate 1", "Shipping Rate 2", "Shipping Rate 3",
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ReorderRatesCampaign
#
# Reorders rates into the entered order
# ================================================================
class ReorderRatesCampaign
  def initialize(desired_order)
    @desired_order = desired_order.map { |item| item.downcase.strip }
  end

  def run(cart, shipping_rates)
    shipping_rates.sort_by! { |rate| @desired_order.index(rate.name.downcase.strip) || Float::INFINITY }
  end
end

CAMPAIGNS = [
  ReorderRatesCampaign.new(DESIRED_RATE_ORDER),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Kortingstarieven per kortingscode

Gebruik dit script om een korting op verzendtarieven aan te bieden als de klant een kortingscode heeft gebruikt bij het afrekenen.

Als je klant bijvoorbeeld een kortingscode heeft gebruikt bij het afrekenen met 15% korting op hun aankoop, dan kun je deze klanten ook 15% korting bieden op hun gekozen verzendtarief.

# ================================ Customizable Settings ================================
# ================================================================
# Discount Rate(s) by Discount Code(s)
#
# If one of the entered discount codes is used, the entered
# rate(s) are discounted by the entered amount
#
# - 'discount_code_match_type' determines whether the below
# strings should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'discount_codes' is a list of strings to identify discount
# codes
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'rate_names' is a list of strings to identify rates
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_DISCOUNT_CODES = [
  {
    discount_code_match_type: :exact,
    discount_codes: ["TESTCODE1", "TESTCODE2"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
    discount_type: :percent,
    discount_amount: 100,
    discount_message: "Free Shipping with discount code"
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DiscountCodeSelector
#
# Finds whether the supplied discount code matches any of the
# entered codes.
# ================================================================
class DiscountCodeSelector
  def initialize(match_type, discount_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @discount_codes = discount_codes.map { |discount_code| discount_code.upcase.strip }
  end

  def match?(discount_code)
    @discount_codes.any? { |code| discount_code.code.upcase.send(@comparator, code) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied shipping rate.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      discount_amount * 0.01
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(shipping_rate)
    rate_discount = if @discount_type == :percent
      shipping_rate.price * @discount_amount
    else
      @discount_amount
    end

    shipping_rate.apply_discount(rate_discount, message: @discount_message)
  end
end

# ================================================================
# DiscountRatesForDiscountCodeCampaign
#
# Applies the entered discount to the entered rates if the
# any of the entered discount codes are used.
# ================================================================
class DiscountRatesForDiscountCodeCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.discount_code.nil?

    @campaigns.each do |campaign|
      discount_code_selector = DiscountCodeSelector.new(campaign[:discount_code_match_type], campaign[:discount_codes])

      next unless discount_code_selector.match?(cart.discount_code)

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])
      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message],
      )

      shipping_rates.each do |shipping_rate|
        next unless rate_name_selector.match?(shipping_rate)
        discount_applicator.apply(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountRatesForDiscountCodeCampaign.new(DISCOUNTS_FOR_DISCOUNT_CODES),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Kortingstarief per klant-tag

Gebruik dit script om verzendkosten voor klanten met een specifieke tag aan te bieden.

Je kunt bijvoorbeeld een korting van 10% bieden op de verzendkosten als de klant de tag VIP heeft.

# ================================ Customizable Settings ================================
# ================================================================
# Discount rates based on customer tag, where:
# - 'tag_match_type' determines whether we look for the customer
# to be tagged with any of the entered tags or not. Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of customer tags to qualify for
# a discount
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'rate_names' is a list of strings to identify rates
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_CUSTOMER_TAG = [
  {
    tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "10% off shipping for tagged customers"
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied shipping rate
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      discount_amount * 0.01
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(shipping_rate)
    rate_discount = if @discount_type == :percent
      shipping_rate.price * @discount_amount
    else
      @discount_amount
    end

    shipping_rate.apply_discount(rate_discount, message: @discount_message)
  end
end

# ================================================================
# DiscountRatesForCustomerTagCampaign
#
# Applies the entered discount to the entered rates if the
# customer has any of the entered tags
# ================================================================
class DiscountRatesForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.customer.nil?

    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(campaign[:tag_match_type], campaign[:customer_tags])

      next unless customer_tag_selector.match?(cart.customer)

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])
      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message],
      )

      shipping_rates.each do |shipping_rate|
        next unless rate_name_selector.match?(shipping_rate)
        discount_applicator.apply(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountRatesForCustomerTagCampaign.new(DISCOUNTS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Alleen door de vervoerder berekende tarieven weergeven

Gebruik dit script om alleen door de vervoerder berekende tarieven weer te geven. Als de door de vervoerder berekende tarieven niet beschikbaar zijn, worden de handmatig aangemaakte tarieven weergegeven.

# ================================================================
# Carrier Calculated Rate Fallback
#
# As long as carrier calculated rates are available, Shopify rates
# will be hidden.
# ================================================================
class CalculatedRateFallbackCampaign
  def run(shipping_rates)
    has_calculated_rates = shipping_rates.any?{ |shipping_rate| shipping_rate.source.downcase != 'shopify' }

    return unless has_calculated_rates

    shipping_rates.delete_if { |shipping_rate| shipping_rate.source.downcase == 'shopify' }
  end
end

CAMPAIGNS = [
  CalculatedRateFallbackCampaign.new(),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Klaar om te beginnen met verkopen met Shopify?

Probeer het gratis