Star Micronics TSP100IIIBI Bluetooth wireless receipt printer
Model number: 39472110
Where to buy the Bluetooth wireless receipt printer
If you're in Canada, the United States, or the United Kingdom, you can buy the Star Micronics TSP100IIIBI Bluetooth wireless receipt printer from the Shopify Hardware Store, as part of the retail custom kit or as a single item.
|In the United States||hardware.shopify.com|
|In the United Kingdom||hardware.shopify.co.uk|
Buying paper for your Bluetooth wireless receipt printer
Any thermal paper rolls works with this printer, if the paper meets the following specifications:
|Width||80mm standard, adjustable to 58 mm with paper roll guide|
|Thickness||Between 0.053 mm and 0.085 mm|
|Roll diameter||Up to 83 mm|
For an explanation of how to load the receipt printer, see the guide in the manufacturer's hardware manual.
Plug in your Bluetooth printer
You need to connect your printer to the power supply.
Plug one end of the power cable into the back of your receipt printer.
Plug the other end of the cable into a power outlet.
Turn the printer on. The Ready indicator turns a solid blue. The ERROR indicator blinks red when no paper is loaded.
If paper is loaded, then a diagnostic report prints.
After this, you're ready to pair the printer with your iPad.
Pair and connect the Bluetooth wireless receipt printer with your iPad
Pairing identifies the devices to each other, and establishes a bond between them. This enables the paired devices to connect in the future without repeating authentication checks.
The Star Micronics TSP100IIIBI Bluetooth wireless receipt printer (model number 39472110) comes with auto-connect enabled. This means that after you've paired your printer with your iPad, the Bluetooth connection is established automatically every time the printer is switched on and in range of your iPad.
Connect your printer to the power supply.
Tap the Settings icon on your iPad, and then tap the Bluetooth menu option. You should see the Star Micronics printer in the Other devices list, with a name like TSP100-XXXXX:
Tap the receipt printer TSP100-XXXX and wait for the pairing process to complete. The pairing is complete when the printer moves to the My devices list and has Connected displayed to the right of its name:
The TSP100IIIBI Bluetooth receipt printer is shipped with auto-connect enabled by default. This means that a paired printer connects automatically whenever it's turned on and within range of the iPad it has been paired with.
If you don't want your paired printer to connect automatically every time you switch it on, then you need to disable auto-connect. One reason for disabling auto-connect is if you use multiple iPads with a single printer.
Make sure your printer is paired with your iPad.
From the Apple App Store, download the TSP100III Utility app, created by Star Micronics.
Open the TSP100III Utility app, and then tap Unselected state in the Selected device section.
On the Select device screen, select the receipt printer and tap Apply. The receipt printer is named TSP100IIIBI or something similar:
In the Configuration section, tap Bluetooth settings.
Disable the Auto connection option, and then tap Apply. Tap Continue at the new pairing permission prompt to save the settings:
Open the iPad's Settings and tap the Bluetooth menu option.
Tap the receipt printer under My devices to re-connect.
From now on, you need to return to the iPad Bluetooth settings (not the Shopify POS app settings) and select the printer from the My devices list every time you switch on the printer or restart the iPad. The receipt printer no longer automatically connects to the iPad.
To enable the receipt printer's auto-connect function, repeat the steps in disabling auto-connect but enable Auto-connect in step 6.
After you've connected the Bluetooth wireless receipt printer with your iPad
When your printer is connected, don't forget to:
Unpair your iPad and receipt printer
You can unpair your iPad and receipt printer.
Turn off the printer.
In your iPad's settings, tap Bluetooth to see your paired Bluetooth devices.
Tap the i symbol to the right of the printer name, and then tap Forget this device to remove the printer from your Bluetooth devices list.
From the Hardware settings screen of Shopify POS, swipe Bluetooth receipt printer left to show a Delete button.
Return your receipt printer to its factory settings
You can return your receipt printer to its factory settings.
With the printer turned off, find the reset button located on the back of the printer, and then use a pen to press and hold down the button.
While holding down the reset button, turn on the printer. When the ERROR light flashes, you can release the button.
Wait until the ERROR light stops flashing. To complete the reset, turn off the printer a second time, wait 5 seconds, and then turn on the printer again.
The printer is now fully reset and ready to be paired with your iPad.
If you're using model number 39472110, then resetting leaves auto-connect enabled, although you do need to pair your devices again.
Limitations when using the Star Micronics TSP100IIIBI Bluetooth wireless receipt printer
Shopify POS has an exclusive, 1-to-1 relationship with the Star Micronics TSP100IIIBI Bluetooth wireless receipt printer, which means the following:
You can't connect multiple iPads to the same printer.
Shopify POS won't work with multiple printers at the same time.
Troubleshooting the Star Micronics TSP100IIIBI
If you have trouble using the Star Micronics TSP100IIIBI, then try these troubleshooting steps.
Check that you have these basic requirements:
- Your Shopify POS app is up to date.
- Your iPad's version of iOS is up to date.
- Your iPad has Bluetooth enabled.
Check that printer paper is correctly installed and that the status indicator light is a solid blue color.
Restart the printer.
Go to your iPad's Bluetooth settings, and confirm that the Star Micronics printer shows as Not connected.
Tap the printer to connect to it.
When the printer shows as Connected, restart it again. When the printer turns on, it should show briefly as Not connected, and then as Connected.
If the printer doesn't connect automatically when you restart it for the second time, then you need to enable auto-connect.
Test the printer by printing a test receipt.
If you still have trouble using the receipt printer after trying these steps, then contact Shopify Support.