Ví dụ về tập lệnh thanh toán

Tập lệnh thanh toán tương tác với cổng thanh toán và có thể thay đổi tiêu đề, khả năng hiển thị và vị trí hiển thị của cổng. Những tập lệnh này sẽ chạy mỗi khi khách hàng truy cập vào trang phương thức thanh toán khi thanh toán. Tập lệnh thanh toán không tương tác với thanh toán nhanh vì thanh toán nhanh hiển thị với khách hàng trước khi họ đến trang thanh toán.

Để sử dụng mẫu trên trang này, tạo tập lệnh với mẫu trống.

Các bước thực hiện:

  1. Trong trang quản trị Shopify, vào Ứng dụng > Script Editor.
  2. Nhấp vào Create script (Tạo tập lệnh).
  3. Nhấp vào Cổng thanh toán.
  4. Chọn Blank template (Mẫu trống), rồi nhấp vào Create script (Tạo tập lệnh).
  5. Trong mục Ruby source code (Mã nguồn Ruby), xóa dòng mã mặc định: Output.cart = Input.cart
  6. Sao chép tập lệnh từ trang này và dán vào mục Ruby source code (Mã nguồn Ruby).
  7. Chỉnh sửa mục Customizable Settings (Cài đặt tùy chỉnh) của tập lệnh để hoạt động tại cửa hàng.
  8. Kiểm tra tập lệnh. Để biết thêm thông tin, tham khảo Thử nghiệm và gỡ lỗi Đoạn mã Shopify.
  9. Sau khi kiểm tra: - nhấp vào Save draft (Lưu bản nháp) để lưu bản nháp chưa đăng của tập lệnh hoặc
    • nhấp vào Save and publish (Lưu và đăng) để tạo và đăng đoạn mã.

Hiển thị cổng thanh toán cho khách hàng cụ thể

Sử dụng tập lệnh này để chỉ hiển thị tùy chọn cổng cho khách hàng cụ thể.

Ví dụ: Bạn có thể sử dụng tập lệnh này để chỉ hiển thị cổng dành riêng cho khách hàng có thẻ VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Show Gateways For Customer Tag
#
# If a customer is tagged (or not, depending on the setting below)
# with the entered tag(s), the entered gateway(s) will be shown, and
# all others will be hidden. Otherwise, the entered gateway(s) will
# be hidden.
#
# - 'customer_tag_match_type' determines whether we look for the customer
# to be tagged with any of the entered tags or not. Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of customer tags to trigger the
# campaign
# - 'gateway_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'gateway_names' is a list of strings to identify gateways
# ================================================================
SHOW_GATEWAYS_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    gateway_match_type: :exact,
    gateway_names: ["Gateway", "Other Gateway"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# GatewayNameSelector
#
# Finds whether the supplied gateway name matches any of the
# entered names.
# ================================================================
class GatewayNameSelector
  def initialize(match_type, gateway_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @gateway_names = gateway_names.map { |name| name.downcase.strip }
  end

  def match?(payment_gateway)
    @gateway_names.any? { |name| payment_gateway.name.downcase.strip.send(@comparator, name) }
  end
end

# ================================================================
# ShowGatewaysForCustomerTagCampaign
#
# If the customer has any of the entered tags, the entered gateways
# are shown/hidden depending on the entered settings
# ================================================================
class ShowGatewaysForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, payment_gateways)
    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(
        campaign[:customer_tag_match_type],
        campaign[:customer_tags],
      )

      customer_match = cart.customer.nil? ? false : customer_tag_selector.match?(cart.customer)

      gateway_name_selector = GatewayNameSelector.new(
        campaign[:gateway_match_type],
        campaign[:gateway_names],
      )

      payment_gateways.delete_if do |payment_gateway|
        gateway_name_selector.match?(payment_gateway) != customer_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowGatewaysForCustomerTagCampaign.new(SHOW_GATEWAYS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.payment_gateways)
end

Output.payment_gateways = Input.payment_gateways

Ẩn cổng đối với sản phẩm cụ thể

Sử dụng tập lệnh này để ẩn cổng khi khách hàng thêm một số mặt hàng cụ thể vào giỏ hàng.

Ví du: Bạn có thể ẩn cổng nếu khách hàng đặt hàng một chiếc mũ cụ thể, chỉ hiển thị các tùy chọn cổng khác mà khách hàng đủ điều kiện.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Gateway(s) for Product
#
# If the cart contains any "matching" items, the entered gateway(s)
# are hidden.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - 'product_selectors' is a list of strings or numbers to
# identify products by the above selector type
# - 'gateway_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'gateway_names' is a list of strings to identify gateways
# ================================================================
HIDE_GATEWAY_FOR_PRODUCT = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890987, 1234567890986],
    gateway_match_type: :exact,
    gateway_names: ["Gateway", "Other Gateway"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if self.respond_to?(@selector_type)
      self.send(@selector_type, line_item)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end

  def tag(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@selectors & product_tags).send(@comparator)
  end

  def type(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
  end

  def vendor(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
  end

  def product_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
  end

  def variant_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.id)
  end

  def all(line_item)
    true
  end
end

# ================================================================
# GatewayNameSelector
#
# Finds whether the supplied gateway name matches any of the
# entered names.
# ================================================================
class GatewayNameSelector
  def initialize(match_type, gateway_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @gateway_names = gateway_names.map { |name| name.downcase.strip }
  end

  def match?(payment_gateway)
    @gateway_names.any? { |name| payment_gateway.name.downcase.strip.send(@comparator, name) }
  end
end

# ================================================================
# HideGatewayForProductCampaign
#
# If the cart contains any "matching" items, the entered gateway(s)
# are hidden.
# ================================================================
class HideGatewayForProductCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, payment_gateways)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      next unless cart.line_items.any? { |line_item| product_selector.match?(line_item) }

      gateway_name_selector = GatewayNameSelector.new(
        campaign[:gateway_match_type],
        campaign[:gateway_names],
      )

      payment_gateways.delete_if do |payment_gateway|
        gateway_name_selector.match?(payment_gateway)
      end
    end
  end
end

CAMPAIGNS = [
  HideGatewayForProductCampaign.new(HIDE_GATEWAY_FOR_PRODUCT),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.payment_gateways)
end

Output.payment_gateways = Input.payment_gateways

Hiển thị cổng cho một số quốc gia cụ thể

Sử dụng tập lệnh này để chỉ hiển thị cổng thanh toán khi khách hàng đặt hàng từ một quốc gia cụ thể.

Ví dụ: Bạn có thể sử dụng tập lệnh này để chỉ cung cấp cổng thanh toán khi khách hàng đặt hàng từ Canada. Cổng sẽ ẩn đối với những địa chỉ ở các quốc gia khác.

# ================================ Customizable Settings ================================
# ================================================================
# Show Gateway(s) for Country
#
# If the shipping address country matches any of the entered
# countries, the entered gateway(s) will be shown, and all others
# will be hidden. Otherwise, the entered gateway(s) will be hidden.
#
# - 'country_code_match_type' determines whether we look for the cart
# country to match the entered selectors or not. Can be:
# - ':include' to look for a country in the list
# - ':exclude' to make sure the country is not in the list
# - 'country_codes' is a list of 2-character abbreviations for
# the applicable countries
# - 'gateway_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'gateway_names' is a list of strings to identify gateways
# ================================================================
SHOW_GATEWAYS_FOR_COUNTRY = [
  {
    country_code_match_type: :include,
    country_codes: ["CA"],
    gateway_match_type: :exact,
    gateway_names: ["Gateway", "Other Gateway"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CountrySelector
#
# Finds whether the supplied country code matches the entered
# string.
# ================================================================
class CountrySelector
  def initialize(match_type, countries)
    @match_type = match_type
    @countries = countries.map { |country| country.upcase.strip }
  end

  def match?(country_code)
    (@match_type == :include) == @countries.include?(country_code.upcase.strip)
  end
end

# ================================================================
# GatewayNameSelector
#
# Finds whether the supplied gateway name matches any of the
# entered names.
# ================================================================
class GatewayNameSelector
  def initialize(match_type, gateway_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @gateway_names = gateway_names.map { |name| name.downcase.strip }
  end

  def match?(payment_gateway)
    @gateway_names.any? { |name| payment_gateway.name.downcase.strip.send(@comparator, name) }
  end
end

# ================================================================
# ShowGatewaysForCountryCampaign
#
# If the shipping address country matches any of the entered
# countries, the entered gateway(s) will be shown, and all others
# will be hidden. Otherwise, the entered gateway(s) will be hidden.
# ================================================================
class ShowGatewaysForCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, payment_gateways)
    address = cart.shipping_address

    @campaigns.each do |campaign|
      country_selector = CountrySelector.new(
        campaign[:country_code_match_type],
        campaign[:country_codes],
      )

      country_match = address.nil? ? false : country_selector.match?(address.country_code)

      gateway_name_selector = GatewayNameSelector.new(
        campaign[:gateway_match_type],
        campaign[:gateway_names],
      )

      payment_gateways.delete_if do |payment_gateway|
        gateway_name_selector.match?(payment_gateway) != country_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowGatewaysForCountryCampaign.new(SHOW_GATEWAYS_FOR_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.payment_gateways)
end

Output.payment_gateways = Input.payment_gateways

Ẩn cổng đối với các quốc gia cụ thể

Sử dụng tập lệnh này để chỉ ẩn cổng thanh toán tại một số quốc gia cụ thể.

Ví dụ: Bạn có thể sử dụng tập lệnh này để chỉ ẩn cổng với khách hàng ở Canada. Đơn hàng từ tất cả các quốc gia khác vẫn có thể sử dụng cổng thanh toán này.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Gateway(s) for Country
#
# If the shipping address country matches any of the entered
# countries, the entered gateway(s) will be hidden.
#
# - 'country_code_match_type' determines whether we look for the cart
# country to match the entered selectors or not. Can be:
# - ':include' to look for a country in the list
# - ':exclude' to make sure the country is not in the list
# - 'country_codes' is a list of 2-character abbreviations for
# the applicable countries
# - 'gateway_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'gateway_names' is a list of strings to identify gateways
# ================================================================
HIDE_GATEWAYS_FOR_COUNTRY = [
  {
    country_code_match_type: :include,
    country_codes: ["CA"],
    gateway_match_type: :exact,
    gateway_names: ["Gateway", "Other Gateway"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CountrySelector
#
# Finds whether the supplied country code matches the entered
# string.
# ================================================================
class CountrySelector
  def initialize(match_type, countries)
    @match_type = match_type
    @countries = countries.map { |country| country.upcase.strip }
  end

  def match?(country_code)
    (@match_type == :include) == @countries.include?(country_code.upcase.strip)
  end
end

# ================================================================
# GatewayNameSelector
#
# Finds whether the supplied gateway name matches any of the
# entered names.
# ================================================================
class GatewayNameSelector
  def initialize(match_type, gateway_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @gateway_names = gateway_names.map { |name| name.downcase.strip }
  end

  def match?(payment_gateway)
    @gateway_names.any? { |name| payment_gateway.name.downcase.strip.send(@comparator, name) }
  end
end

# ================================================================
# HideGatewaysForCountryCampaign
#
# If the shipping address country matches any of the entered
# countries, the entered gateway(s) will be hidden.
# ================================================================
class HideGatewaysForCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, payment_gateways)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      country_selector = CountrySelector.new(
        campaign[:country_code_match_type],
        campaign[:country_codes],
      )

      next unless country_selector.match?(address.country_code)

      gateway_name_selector = GatewayNameSelector.new(
        campaign[:gateway_match_type],
        campaign[:gateway_names],
      )

      payment_gateways.delete_if do |payment_gateway|
        gateway_name_selector.match?(payment_gateway)
      end
    end
  end
end

CAMPAIGNS = [
  HideGatewaysForCountryCampaign.new(HIDE_GATEWAYS_FOR_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.payment_gateways)
end

Output.payment_gateways = Input.payment_gateways

Hiển thị cổng theo mức chi tiêu

Sử dụng tập lệnh này để hiển thị cổng cụ thể nếu khách hàng chi tiêu vượt một số tiền nhất định.

Ví dụ: Hiển thị cổng Bank Deposit nếu khách hàng chi tiêu từ 1000 USD trở lên, nếu không hãy ẩn cổng.

# ================================ Customizable Settings ================================
# ================================================================
# Show Gateway(s) for Spend Threshold
#
# If the cart total is greather than, or equal to, the entered
# threshold, the entered gateway(s) are shown.
#
# - 'threshold' is the dollar amount the customer must spend in
# order to see the entered gateway(s)
# - 'gateway_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'gateway_names' is a list of strings to identify gateways
# ================================================================
SHOW_GATEWAYS_FOR_THRESHOLD = [
  {
    threshold: 500,
    gateway_match_type: :exact,
    gateway_names: ["Gateway", "Other Gateway"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# GatewayNameSelector
#
# Finds whether the supplied gateway name matches any of the
# entered names.
# ================================================================
class GatewayNameSelector
  def initialize(match_type, gateway_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @gateway_names = gateway_names.map { |name| name.downcase.strip }
  end

  def match?(payment_gateway)
    @gateway_names.any? { |name| payment_gateway.name.downcase.strip.send(@comparator, name) }
  end
end

# ================================================================
# ShowGatewaysForThresholdCampaign
#
# If the cart total is greather than, or equal to, the entered
# threshold, the entered gateway(s) are shown.
# ================================================================
class ShowGatewaysForThresholdCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, payment_gateways)
    @campaigns.each do |campaign|
      next unless cart.subtotal_price < (Money.new(cents: 100) * campaign[:threshold])

      gateway_name_selector = GatewayNameSelector.new(
        campaign[:gateway_match_type],
        campaign[:gateway_names],
      )

      payment_gateways.delete_if do |payment_gateway| 
        gateway_name_selector.match?(payment_gateway)
      end
    end
  end
end

CAMPAIGNS = [
  ShowGatewaysForThresholdCampaign.new(SHOW_GATEWAYS_FOR_THRESHOLD),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.payment_gateways)
end

Output.payment_gateways = Input.payment_gateways

Sắp xếp lại thứ tự cổng

Sử dụng tập lệnh này để thay đổi thứ tự mặc định của cổng thanh toán bạn cung cấp cho khách hàng.

# ================================ Customizable Settings ================================
# ================================================================
# Reorder Gateways
#
# The order in which you would like your gateways to display
# ================================================================
DESIRED_GATEWAY_ORDER = [
  "Payment Gateway 1", "Payment Gateway 2", "Payment Gateway 3",
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ReorderGatewaysCampaign
#
# Reorders gateways into the entered order
# ================================================================
class ReorderGatewaysCampaign
  def initialize(desired_order)
    @desired_order = desired_order.map { |item| item.downcase.strip }
  end

  def run(cart, payment_gateways)
    payment_gateways.sort_by! { |payment_gateway| @desired_order.index(payment_gateway.name.downcase.strip) || Float::INFINITY }
  end
end

CAMPAIGNS = [
  ReorderGatewaysCampaign.new(DESIRED_GATEWAY_ORDER),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.payment_gateways)
end

Output.payment_gateways = Input.payment_gateways

Bạn đã sẵn sàng bán hàng với Shopify?

Dùng thử miễn phí