Trợ giúp
Đăng nhập

Ví dụ về đoạn mã phí vận chuyển

Các đoạn mã vận chuyển tương tác với phí vận chuyển, đồng thời có thể thay đổi tiêu đề, khả năng hiển thị, thứ tự hiển thị và giá của phí vận chuyển. Những đoạn mã này chạy mỗi khi khách hàng truy cập vào trang tùy chọn vận chuyển ở trang thanh toán.

Các đoạn mã vận chuyển có chức năng giảm giá cho khoản đăng ký chỉ áp dụng đối với khoản thanh toán đầu tiên của gói đăng ký đó. Các khoản thanh toán sau đó sẽ không được giảm giá nhờ đoạn mã.

Để sử dụng các mẫu trên trang này, hãy tạo một đoạn mã mới theo mẫu trống.

Các bước thực hiện:

  1. Trong bảng điều khiển quản trị Shopify, đi tới Ứng dụng > Script Editor.

  2. Nhấp vào Tạo đoạn mã.

  3. Nhấp vào Phí vận chuyển.

  4. Chọn Mẫu trống, rồi nhấp vào Tạo đoạn mã.

  5. Trong phần Mã nguồn Ruby, xóa dòng mã mặc định: Output.cart = Input.cart

  6. Sao chép đoạn mã từ trang này rồi dán vào phần Mã nguồn Ruby.

  7. Chỉnh sửa phần Cài đặt tùy chỉnh của đoạn mã để dùng cho cửa hàng.

  8. Kiểm tra đoạn mã. Để biết thêm thông tin, hãy tham khảo phần Kiểm tra và gỡ lỗi Shopify Scripts.

  9. Sau khi kiểm tra:

    • nhấp vào Lưu bản nháp để lưu bản nháp chưa đăng của đoạn mã, hoặc
    • nhấp vào Lưu và đăng để tạo và đăng đoạn mã.

Trên trang này

Thêm tin nhắn vào tên phí vận chuyển đối với các tỉnh và quốc gia cụ thể

Sử dụng đoạn mã này để thêm tin nhắn vào phí vận chuyển theo tỉnh và quốc gia của địa chỉ giao hàng.

Ví dụ: thêm tin nhắn có nội dung Due to COVID-19 disruptions, shipping might take longer than normal. vào phí vận chuyển của British Columbia và Ontario (Canada), cũng như Washington và New York (Hoa Kỳ).

# ================================ Customizable Settings ================================
# ================================================================
# Add Message to Rate Names for Province or Country
#
# If the cart's shipping address province/country matches
# the entered settings, all shipping rates will have the
# entered message appended to their name.
#
#   - 'country_code' is a 2-character abbreviation for the
#     applicable country
#   - 'province_code_match_type' determines whether we look for
#     provinces that do, or don't, match the entered options, or
#     all provinces. Can be:
#       - ':include' to look for provinces that DO match
#       - ':exclude' to look for provinces that DO NOT match
#       - ':all' to look for all provinces
#   - 'province_codes' is a list of 2-character abbreviations for
#     the applicable provinces
#   - 'message' is the message to append to rate names
# ================================================================
RATE_MESSAGE_FOR_PROVINCE_COUNTRY = [
  {
    country_code: "CA",
    province_code_match_type: :include,
    province_codes: ["BC", "ON"],
    message: "Due to COVID-19 disruptions, shipping might take longer than normal."
  },
  {
    country_code: "US",
    province_code_match_type: :include,
    province_codes: ["NY", "WA"],
    message: "Due to COVID-19 disruptions, shipping might take longer than normal."
  },
]

# ================================ Script Code (do not edit) ===============================
# ================================================================
# ProvinceSelector
#
# Finds whether the supplied province code matches the entered
# strings.
# ================================================================
class ProvinceSelector
  def initialize(match_type, provinces)
    @match_type = match_type
    @provinces = provinces.map { |province| province.upcase.strip }
  end

  def match?(province_code)
    if @match_type == :all
      true
    else
      (@match_type == :include) == @provinces.any? { |province| province_code.upcase.strip == province }
    end
  end
end

# ================================================================
# AddMessageToRateForProvinceCountryCampaign
#
# If the cart's shipping address country/province matches the
# entered settings, all shipping rates will have the entered
# message appended to their name
# ================================================================
class AddMessageToRateForProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.shipping_address.nil?

    address = cart.shipping_address

    @campaigns.each do |campaign|
      next unless address.country_code.upcase.strip == campaign[:country_code].upcase.strip

      province_selector = ProvinceSelector.new(campaign[:province_code_match_type],campaign[:province_codes])

      next unless province_selector.match?(address.province_code)

      shipping_rates.each do |shipping_rate|
        rate_name = shipping_rate.name + ' - ' + campaign[:message]
        shipping_rate.change_name(rate_name)
      end
    end
  end
end

CAMPAIGNS = [
  AddMessageToRateForProvinceCountryCampaign.new(RATE_MESSAGE_FOR_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Hiển thị phí cho mã zip, tỉnh và quốc gia cụ thể

Sử dụng tập lệnh này để chỉ hiển thị phí vận chuyển cụ thể cho khách hàng từ địa điểm nhất định.

Ví dụ: chỉ hiển thị một mức phí vận chuyển nhất định cho khách hàng ở khu vực có mã zip 90210 tại California. Mức phí này bị ẩn đối với mọi địa điểm khác.

# ================================ Customizable Settings ================================
# ================================================================
# Show Rate(s) for Zip/Province/Country
#
# If the cart's shipping address country/province/zip match the
# entered settings, the entered rate(s) are shown, and all other
# rates are hidden. Otherwise, the entered rate(s) are hidden.
#
#   - 'country_code' is a 2-character abbreviation for the
#     applicable country
#   - 'province_code' is a list of 2-character abbreviations for
#     the applicable province(s)
#   - 'zip_code_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#   - 'zip_codes' is a list of strings to identify zip codes
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#       - ':all' for all rates
#   - 'rate_names' is a list of strings to identify rates
#     - if using ':all' above, this can be set to 'nil'
# ================================================================
SHOW_RATES_FOR_ZIP_PROVINCE_COUNTRY = [
  {
    country_code: "US",
    province_code: "CA",
    zip_code_match_type: :exact,
    zip_codes: ["90210"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ZipCodeSelector
#
# Finds whether the supplied zip code matches any of the entered
# strings.
# ================================================================
class ZipCodeSelector
  def initialize(match_type, zip_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @zip_codes = zip_codes.map { |zip_code| zip_code.upcase.strip }
  end

  def match?(zip_code)
    @zip_codes.any? { |zip| zip_code.to_s.upcase.strip.send(@comparator, zip) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# ShowRatesForZipProvinceCountryCampaign
#
# If the cart's shipping address zip/province/country match the
# entered settings, the entered rate(s) are shown, and all other
# rates are hidden. Otherwise, the entered rate(s) are hidden.
# ================================================================
class ShowRatesForZipProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    @campaigns.each do |campaign|
      zip_code_selector = ZipCodeSelector.new(campaign[:zip_code_match_type], campaign[:zip_codes])
      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])

      if address.nil?
        full_match = false
      else
        country_match =  address.country_code.upcase.strip == campaign[:country_code].upcase.strip
        province_match = address.province_code.upcase.strip == campaign[:province_code].upcase.strip
        zip_match = zip_code_selector.match?(address.zip)
        full_match = country_match && province_match && zip_match
      end

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate) != full_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowRatesForZipProvinceCountryCampaign.new(SHOW_RATES_FOR_ZIP_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Ẩn phí đối với mã zip, tỉnh và quốc gia cụ thể

Sử dụng tập lệnh này để ẩn phí cụ thể đối với khách hàng từ một địa điểm nhất định.

Ví dụ: ẩn một mức phí vận chuyển nhất định đối với khách hàng ở khu vực có mã zip 90210 tại California.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for Zip/Province/Country
#
# If the cart's shipping address country/province/zip match the
# entered settings, the entered rate(s) are hidden.
#
#   - 'country_code' is a 2-character abbreviation for the
#     applicable country or region
#   - 'province_code' is a list of 2-character abbreviations for
#     the applicable provinces or states
#   - 'zip_code_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#   - 'zip_codes' is a list of strings to identify zip codes
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#       - ':all' for all rates
#   - 'rate_names' is a list of strings to identify rates
#     - if using ':all' above, this can be set to 'nil'
# ================================================================
HIDE_RATES_FOR_ZIP_PROVINCE_COUNTRY = [
  {
    country_code: "US",
    province_code: "CA",
    zip_code_match_type: :exact,
    zip_codes: ["90210"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ZipCodeSelector
#
# Finds whether the supplied zip code matches any of the entered
# strings.
# ================================================================
class ZipCodeSelector
  def initialize(match_type, zip_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @zip_codes = zip_codes.map { |zip_code| zip_code.upcase.strip }
  end

  def match?(zip_code)
    @zip_codes.any? { |zip| zip_code.to_s.upcase.strip.send(@comparator, zip) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForZipProvinceCountryCampaign
#
# If the cart's shipping address zip/province/country match the
# entered settings, the entered rate(s) are hidden.
# ================================================================
class HideRatesForZipProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      zip_code_selector = ZipCodeSelector.new(campaign[:zip_code_match_type], campaign[:zip_codes])

      country_match =  address.country_code.upcase.strip == campaign[:country_code].upcase.strip
      province_match = address.province_code.upcase.strip == campaign[:province_code].upcase.strip
      zip_match = zip_code_selector.match?(address.zip)

      next unless country_match && province_match && zip_match

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForZipProvinceCountryCampaign.new(HIDE_RATES_FOR_ZIP_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Ẩn phí đối với sản phẩm cụ thể ở một số quốc gia

Sử dụng tập lệnh này để ẩn phí đối với khách hàng từ một quốc gia cụ thể khi họ mua mặt hàng nhất định.

Ví dụ: ẩn mức phí vận chuyển nhất định đối với khách hàng tại Canada nếu họ mua áo phông.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for Product/Country
#
# If the cart contains any matching items, and we have a matching
# country, the entered rate(s) are hidden.
#
#   - 'product_selector_match_type' determines whether we look for
#     products that do or don't match the entered selectors. Can
#     be:
#       - ':include' to check if the product does match
#       - ':exclude' to make sure the product doesn't match
#   - 'product_selector_type' determines how eligible products
#     will be identified. Can be either:
#       - ':tag' to find products by tag
#       - ':type' to find products by type
#       - ':vendor' to find products by vendor
#       - ':product_id' to find products by ID
#       - ':variant_id' to find products by variant ID
#       - ':subscription' to find subscription products
#   - 'product_selectors' is a list of tags or IDs to identify
#     associated products
#   - 'country_code_match_type' determines whether we look for
#     countries that do, or don't, match the entered options, or
#     all countries. Can be:
#       - ':include' to look for countries that DO match
#       - ':exclude' to look for countries that DO NOT match
#       - ':all' to look for all countries
#   - 'country_codes' is a list of country code abbreviations
#     - ie. United States would be `US`
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#       - ':all' for all rates
#   - 'rate_names' is a list of strings to identify rates
#     - if using ':all' above, this can be set to 'nil'
# ================================================================
HIDE_RATES_FOR_PRODUCT_AND_COUNTRY = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890987, 1234567890986],
    country_code_match_type: :include,
    country_codes: ["CA"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if self.respond_to?(@selector_type)
      self.send(@selector_type, line_item)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end

  def tag(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@selectors & product_tags).send(@comparator)
  end

  def type(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
  end

  def vendor(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
  end

  def product_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
  end

  def variant_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.id)
  end

  def subscription(line_item)
    !line_item.selling_plan_id.nil?
  end
end

# ================================================================
# CountrySelector
#
# Finds whether the supplied country code matches the entered
# strings.
# ================================================================
class CountrySelector
  def initialize(match_type, countries)
    @match_type = match_type
    @countries = countries.map { |country| country.upcase.strip }
  end

  def match?(country_code)
    if @match_type == :all
      true
    else
      (@match_type == :include) == @countries.any? { |country| country_code.upcase.strip == country }
    end
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForProductCountryCampaign
#
# If the cart contains any matching items, and we have a matching
# country, the entered rate(s) are hidden.
# ================================================================
class HideRatesForProductCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      country_selector = CountrySelector.new(campaign[:country_code_match_type], campaign[:country_codes])
      product_match = cart.line_items.any? { |line_item| product_selector.match?(line_item) }
      country_match = country_selector.match?(address.country_code)

      next unless product_match && country_match

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names],
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForProductCountryCampaign.new(HIDE_RATES_FOR_PRODUCT_AND_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Ẩn phí đối với dịch vụ giao hàng đến hộp thư bưu điện

Sử dụng tập lệnh này để ẩn phí cụ thể đối với khách hàng nếu địa chỉ giao hàng của họ là hộp thư bưu điện.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for PO Box addresses
#
# If the shipping address contains any of the entered "PO Box"
# identifiers, the entered rate(s) are hidden.
#
#   - 'po_box_triggers' is a list of possible strings for a PO
#     Box address
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#       - ':all' for all rates
#   - 'rate_names' is a list of rates to show/hide if the above
#     conditions are met
# ================================================================
HIDE_RATES_FOR_PO_BOX = [
  {
    po_box_triggers: [
      "po box", "post office", "p o box", "p.o.box", "p.o. box", "p.o box", "pobox",
      "post office box", "post box", "p. o. box", "po. box", "postal box",
    ],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# AddressSelector
#
# Finds whether the supplied address contains any of the entered
# strings.
# ================================================================
class AddressSelector
  def initialize(triggers)
    @triggers = triggers.map { |trigger| trigger.downcase.strip }
  end

  def match?(address)
    address_fields = [address.address1, address.address2].map do |line|
      line.nil? ? "" : line.downcase
    end

    address_fields = address_fields.join(" ")
    @triggers.any? { |trigger| address_fields.include?(trigger) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForPOBoxCampaign
#
# If the shipping address contains any of the entered "PO Box"
# identifiers, the entered rate(s) are hidden.
# ================================================================
class HideRatesForPOBoxCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      next unless AddressSelector.new(campaign[:po_box_triggers]).match?(address)

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names],
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForPOBoxCampaign.new(HIDE_RATES_FOR_PO_BOX),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Hiển thị phí theo thẻ khách hàng

Sử dụng tập lệnh này để chỉ hiển thị mức phí cụ thể đối với khách hàng được gắn thẻ nhất định.

Ví dụ: chỉ hiển thị một mức phí vận chuyển nhất định cho khách hàng có thẻ VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Show Rate(s) for Customer Tag
#
# If we have a matching customer, the entered rate(s) will be
# shown, and all others will be hidden. Otherwise, the entered
# rate(s) will be hidden.
#
#   - 'customer_tag_match_type' determines whether we look for the
#     customer to be tagged with any of the entered tags or not.
#     Can be:
#       - ':include' to check if the customer is tagged
#       - ':exclude' to make sure the customer isn't tagged
#   - 'customer_tags' is a list of customer tags to trigger the
#     campaign
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#   - 'rate_names' is a list of strings to identify rates
# ================================================================
SHOW_RATES_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# ShowRateForCustomerTagCampaign
#
# If we have a matching customer, the entered rate(s) will be
# shown, and all others will be hidden. Otherwise, the entered
# rate(s) will be hidden.
# ================================================================
class ShowRateForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(
        campaign[:customer_tag_match_type],
        campaign[:customer_tags]
      )

      customer_match = cart.customer.nil? ? false : customer_tag_selector.match?(cart.customer)

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names]
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate) != customer_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowRateForCustomerTagCampaign.new(SHOW_RATES_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Sắp xếp lại mức phí

Sử dụng tập lệnh này để thay đổi thứ tự mặc định của các mức phí vận chuyển cung cấp cho khách hàng.

# ================================ Customizable Settings ================================
# ================================================================
# The order in which you would like your rates to display
# ================================================================
DESIRED_RATE_ORDER = [
  "Shipping Rate 1", "Shipping Rate 2", "Shipping Rate 3",
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ReorderRatesCampaign
#
# Reorders rates into the entered order
# ================================================================
class ReorderRatesCampaign
  def initialize(desired_order)
    @desired_order = desired_order.map { |item| item.downcase.strip }
  end

  def run(cart, shipping_rates)
    shipping_rates.sort_by! { |rate| @desired_order.index(rate.name.downcase.strip) || Float::INFINITY }
  end
end

CAMPAIGNS = [
  ReorderRatesCampaign.new(DESIRED_RATE_ORDER),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Giảm phí bằng mã giảm giá

Sử dụng tập lệnh này để giảm giá cho mức phí cụ thể nếu khách hàng đã sử dụng mã giảm giá nhất định trong quá trình thanh toán.

Ví dụ: nếu khách hàng đã sử dụng mã giảm giá "DISCOUNT_15", hãy giảm một mức phí nhất định.

# ================================ Customizable Settings ================================
# ================================================================
# Discount Rate(s) by Discount Code(s)
#
# If one of the entered discount codes is used, the entered
# rate(s) are discounted by the entered amount.
#
#   - 'discount_code_match_type' determines whether the below
#     strings should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#   - 'discount_codes' is a list of strings to identify discount
#     codes
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#   - 'rate_names' is a list of strings to identify rates
#   - 'discount_type' is the type of discount to provide. Can be
#     either:
#       - ':percent'
#       - ':dollar'
#   - 'discount_amount' is the percentage/dollar discount to
#     apply
#   - 'discount_message' is the message to show when a discount
#     is applied
# ================================================================
DISCOUNTS_FOR_DISCOUNT_CODES = [
  {
    discount_code_match_type: :exact,
    discount_codes: ["TESTCODE1", "TESTCODE2"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
    discount_type: :percent,
    discount_amount: 100,
    discount_message: "Free Shipping with discount code"
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DiscountCodeSelector
#
# Finds whether the supplied discount code matches any of the
# entered codes.
# ================================================================
class DiscountCodeSelector
  def initialize(match_type, discount_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @discount_codes = discount_codes.map { |discount_code| discount_code.upcase.strip }
  end

  def match?(discount_code)
    @discount_codes.any? { |code| discount_code.code.upcase.send(@comparator, code) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied shipping rate.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      discount_amount * 0.01
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(shipping_rate)
    rate_discount = if @discount_type == :percent
      shipping_rate.price * @discount_amount
    else
      @discount_amount
    end

    shipping_rate.apply_discount(rate_discount, message: @discount_message)
  end
end

# ================================================================
# DiscountRatesForDiscountCodeCampaign
#
# If one of the entered discount codes is used, the entered
# rate(s) are discounted by the entered amount.
# ================================================================
class DiscountRatesForDiscountCodeCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.discount_code.nil?

    @campaigns.each do |campaign|
      discount_code_selector = DiscountCodeSelector.new(campaign[:discount_code_match_type], campaign[:discount_codes])

      next unless discount_code_selector.match?(cart.discount_code)

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])
      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message],
      )

      shipping_rates.each do |shipping_rate|
        next unless rate_name_selector.match?(shipping_rate)
        discount_applicator.apply(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountRatesForDiscountCodeCampaign.new(DISCOUNTS_FOR_DISCOUNT_CODES),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Giảm phí theo thẻ khách hàng

Sử dụng tập lệnh này để giảm một mức phí cụ thể cho khách hàng được gắn thẻ nhất định.

Ví dụ: giảm giá 10% cho một mức phí nhất định nếu khách hàng có thẻ VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Discount Rate(s) for Customer Tag(s)
#
# If we have a matching customer, the entered rate(s) are
# discounted by the entered amount.
#
#   - 'customer_tag_match_type' determines whether we look for the customer
#     to be tagged with any of the entered tags or not. Can be:
#       - ':include' to check if the customer is tagged
#       - ':exclude' to make sure the customer isn't tagged
#   - 'customer_tags' is a list of customer tags to qualify for
#     a discount
#   - 'rate_match_type' determines whether the below strings
#     should be an exact or partial match. Can be:
#       - ':exact' for an exact match
#       - ':partial' for a partial match
#   - 'rate_names' is a list of strings to identify rates
#   - 'discount_type' is the type of discount to provide. Can be
#     either:
#       - ':percent'
#       - ':dollar'
#   - 'discount_amount' is the percentage/dollar discount to
#     apply
#   - 'discount_message' is the message to show when a discount
#     is applied
# ================================================================
DISCOUNTS_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "10% off shipping for tagged customers"
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied shipping rate
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      discount_amount * 0.01
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(shipping_rate)
    rate_discount = if @discount_type == :percent
      shipping_rate.price * @discount_amount
    else
      @discount_amount
    end

    shipping_rate.apply_discount(rate_discount, message: @discount_message)
  end
end

# ================================================================
# DiscountRatesForCustomerTagCampaign
#
# If we have a matching customer, the entered rate(s) are
# discounted by the entered amount.
# ================================================================
class DiscountRatesForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.customer.nil?

    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(campaign[:customer_tag_match_type], campaign[:customer_tags])

      next unless customer_tag_selector.match?(cart.customer)

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])
      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message],
      )

      shipping_rates.each do |shipping_rate|
        next unless rate_name_selector.match?(shipping_rate)
        discount_applicator.apply(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountRatesForCustomerTagCampaign.new(DISCOUNTS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Chỉ hiển thị phí do hãng vận chuyển tính

Sử dụng tập lệnh này để chỉ hiển thị phí do hãng vận chuyển tính. Nếu không có phí do hãng vận chuyển tính, phí do bạn tạo thủ công sẽ hiển thị.

# ================================================================
# Carrier Calculated Rate Fallback
#
# As long as carrier calculated rates are available, Shopify rates
# will be hidden.
# ================================================================
class CalculatedRateFallbackCampaign
  def run(shipping_rates)
    has_calculated_rates = shipping_rates.any?{ |shipping_rate| shipping_rate.source.downcase != 'shopify' }

    return unless has_calculated_rates

    shipping_rates.delete_if { |shipping_rate| shipping_rate.source.downcase == 'shopify' }
  end
end

CAMPAIGNS = [
  CalculatedRateFallbackCampaign.new(),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates