Star Micronics TSP143LAN receipt printer
Model number: 39463110
Where to buy the Star Micronics TSP143LAN receipt printer
The Star Micronics TSP143LAN receipt printer is not available from the Shopify Hardware Store, but you can buy it from from Barcodes Inc.
Buying printer paper
Any thermal paper rolls will work with this printer if:
- the width is 3 1/8" (7.94cm)
- the length does not exceed 230 feet (70.10m).
For an explanation of how to load the receipt printer, see the guide in the manufacturer's hardware manual
Installation and setup
The TSP143LAN receipt printer connects to your network using an Ethernet link interface.
Take a look at this video to see how quick and easy the setup procedure is:
Before you get started, make sure you have the cables you need.
|Cable type||Look for this connector||Available from|
|Cash drawer cable||A cable for the cash drawer is included in the Complete Kit from Shopify. If you bought your cash drawer separately, your supplier should be able to sell you a cable.|
|Ethernet cable (for connecting to the router)||An Ethernet cable approximately 1m in length is included when you buy this printer from Shopify. If you buy it elsewhere, remember you'll need the Ethernet cable.|
To set up the Star TSP143LAN receipt printer:
Connect the receipt printer to the APG Vasario 320 series cash drawer using the cash drawer cable.
Set up the Apple AirPort Express before you continue with the receipt printer installation.
Connect the receipt printer to the Ethernet port on the Apple AirPort. This makes the printer discoverable in the Shopify POS app.
After connecting your printer, don't forget to:
- set it as the default printer (optional)
- print a test receipt
- test the connection to the cash drawer.
If your TSP143LAN printer stops working
Your printer might not be working for several reasons:
Check to see that your network cable is connected to your wireless router. If you are using the Apple AirPort Express, make sure that your wi-fi network is set up correctly.
Check to see that you are connected to the internet. Your printer requires an internet signal to run properly.
Check to see that your printer appears on the Hardware settings screen on the Shopify POS app. If the printer is improperly connected, it will either not show up on the settings screen or it will appear as "Disconnected":
Try turning your printer off/on. This will restart your printer and usually rectify any issue on the printer's end.
To debug your printer, turn your printer off and press and hold the FEED button. While still holding the FEED button, turn the printer back on. Let the printer print off the firmware information and then let go of the feed button. The printer will try to connect to the internet and then continue to print off more diagnostic information. Take a look at the printed paper to see if any of the following issues match the text displayed:
The IP address under "Current IP Parameters Status" displays zeroes.
The first thing to do is turn off the printer, wait five seconds, and turn it back on. Try the debug process again.
If that doesn't work, confirm that you're connected to the LAN port of your router, and that your router is properly plugged in and working. Check out the printer setup video.
Finally, if none of the above solutions worked, contact your internet provider. It could be a problem with your internet setup.
I see a "No Host Connection" message.
This usually happens when you lose your internet connection or when your printer is not connected to your router properly. Check your internet signal and router cable. If you are using the Apple AirPort Express, make sure it is set up properly.
If your printer is a long distance from your router
The network cable provided only extends to three feet. So if your router sits in the back of your store and your POS system sits in the front, the cable will not be able to reach.
There are two alternative solutions:
Purchase a longer network cable and run it from the router to the printer.
If having long cables run throughout your store isn't the ideal solution, we recommend that you purchase the Apple AirPort Express. The Apple AirPort Express is a small device that provides an Ethernet LAN port that you can place close to your Shopify POS system.
The Apple AirPort Express is available for purchase online at www.apple.com or in many Apple retailers/stores.
If the ERROR indicator is blinking red
This is caused when there is no paper present in the printer. Open the printer, replace the paper, and close the lid. The ERROR indicator should turn off and the READY indicator should come on.
If you feed the paper into the receipt printer at an angle, it is likely you'll cause a paper jam. If this happens, turn off the printer, open it up, and try feeding the paper in again.
If you are trying to make your receipt narrower than the specified 3 inch width, make sure you use the divider provided. Don't fold the paper when you feed it into the printer.
You can customize both the basic receipt layout and the transaction description
Limitations when using the Star Micronics TSP143LAN receipt printer
Shopify POS has an exclusive, 1-to-1 relationship with the Star Micronics TSP143LAN receipt printer, which means the following:
You can't connect multiple iPads to the same printer.
Shopify POS won't work with multiple printers at the same time.