Skriptexempel för poster

Skripts för poster påverkar artiklar i en varukorg och kan ändra egenskaper och pris. Skripten körs varje gång som en varukorgs attribut ändras, som tillägg eller borttagande av en artikel, ändrad leveransadress eller tillägg av en rabattkod.

Dessutom: skript och skriptredigerar-appen är bara tillgängliga för Shopify Plus-handlare.

Skapa ett nytt skript med en tom mall, för att använda mallar på sidan.

Steg:

  1. Från din Shopify-administratör går du till Appar > Script Editor.
  2. Klicka på skapa skript.
  3. Klicka på Poster.
  4. Välj tom mall, klicka sedan skapa skript.
  5. I avsnittet för Ruby-källkod, radera standardraden för kod: Output.cart = Input.cart
  6. Kopiera ett skript från sidan och klistra in det i avsnittet för Ruby-källkod.
  7. Redigera skriptets avsnitt för anpassningsbara inställningar för att få det att fungera i din butik.
  8. Testa ditt skript. Om du vill ha mer information, se testa och felsök Shopify-skript.
  9. Efter att ha testat: - klicka på spara utkast för att spara ett opublicerat utkast av skriptet, eller
    • klicka på spara och publicera för att skapa och publicera skriptet.

Differentierad varukorgsrabatt efter spenderat belopp

Använd detta skript för att erbjuda en rabatt med ett dollarbelopp som ökar i förhållande till det totala värdet på artiklarna i varukorgen. Denna rabatt fördelas så jämnt som möjligt på de enskilda artiklarna i varukorgen.

Du kan till exempel använda det här skriptet för att erbjuda kunder 25 USD i rabatt på kundens totala belopp om de spenderar mer än 150 USD, eller 50 USD i rabatt om de spenderar mer än 300 USD, eller 75 USD i rabatt om de spenderar över 400 USD.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discounts by Spend Threshold
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to the cart. The
# discount will be spread, as evenly as possible, across all line
# items.
#
# - 'threshold' is the spend amount needed to qualify
# - 'discount_amount' is the dollar discount to apply to the
# cart
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDING_THRESHOLDS = [
  {
    threshold: 150,
    discount_amount: 25,
    discount_message: 'Spend $150 and get $25 off!',
  },
  {
    threshold: 300,
    discount_amount: 50,
    discount_message: 'Spend $300 and get $50 off!',
  },
  {
    threshold: 400,
    discount_amount: 75,
    discount_message: 'Spend $400 and get $75 off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DollarDiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DollarDiscountApplicator
  def initialize(discount_message)
    @discount_message = discount_message
  end

  def apply(line_item, discount_amount)
    new_line_price = line_item.line_price - discount_amount
    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredDiscountBySpendCampaign
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to the cart. The
# discount will be spread, as evenly as possible, across all line
# items.
# ================================================================
class TieredDiscountBySpendCampaign
  def initialize(tiers)
    @tiers = tiers.sort_by { |tier| tier[:threshold] }.reverse
  end

  def run(cart)
    applicable_tier = @tiers.find { |tier| cart.subtotal_price >= (Money.new(cents: 100) * tier[:threshold]) }
    return if applicable_tier.nil?

    discount_applicator = DollarDiscountApplicator.new(applicable_tier[:discount_message])
    discount_amount = applicable_tier[:discount_amount]
    items = cart.line_items.sort_by { |line_item| line_item.variant.price }
    self.loop_items(cart, items, discount_amount, discount_applicator)
  end

  def loop_items(cart, line_items, discount_amount, discount_applicator)
    avg_discount = (discount_amount.to_f * (1 / line_items.map(&:quantity).reduce(0, :+))).round(2)
    avg_discount = Money.new(cents: 100) * avg_discount
    discount_amount = Money.new(cents: 100) * discount_amount

    line_items.each_with_index do |line_item, index|
      break if discount_amount <= Money.zero

      line_discount = avg_discount * line_item.quantity

      if discount_amount < line_discount || index == (line_items.size - 1)
        discount_update = line_item.line_price > discount_amount ? discount_amount : line_item.line_price
      else
        discount_update = line_item.line_price > line_discount ? line_discount : line_item.line_price
      end

      discount_amount -= discount_update
      discount_applicator.apply(line_item, discount_update)
    end
  end
end

CAMPAIGNS = [
  TieredDiscountBySpendCampaign.new(SPENDING_THRESHOLDS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Differentierad rabatt efter spenderat belopp

Använd skriptet för att erbjuda en procentuell rabatt som ökar i enlighet med det totala värdet på specifika artiklar i varukorgen.

Du kan till exempel använda det här skriptet för att erbjuda kunder 10 % rabatt om de spenderar 30 USD eller mer, 15 % rabatt om de spenderar 50 USD eller mer, eller 20 % rabatt om de spenderar över 100 USD.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discounts by Spend Threshold
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to each item in
# the cart.
#
# - 'threshold' is the spend amount needed to qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDING_THRESHOLDS = [
  {
    threshold: 30,
    discount_type: :percent,
    discount_amount: 10,
    discount_message: 'Spend $30 and get 10% off!',
  },
  {
    threshold: 50,
    discount_type: :percent,
    discount_amount: 15,
    discount_message: 'Spend $50 and get 15% off!',
  },
  {
    threshold: 100,
    discount_type: :percent,
    discount_amount: 20,
    discount_message: 'Spend $100 and get 20% off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredDiscountBySpendCampaign
#
# If the cart total is greater than (or equal to) an entered
# threshold, the associated discount is applied to each item in
# the cart.
# ================================================================
class TieredDiscountBySpendCampaign
  def initialize(tiers)
    @tiers = tiers.sort_by { |tier| tier[:threshold] }.reverse
  end

  def run(cart)
    applicable_tier = @tiers.find { |tier| cart.subtotal_price >= (Money.new(cents: 100) * tier[:threshold]) }
    return if applicable_tier.nil?

    discount_applicator = DiscountApplicator.new(
      applicable_tier[:discount_type],
      applicable_tier[:discount_amount],
      applicable_tier[:discount_message]
    )

    cart.line_items.each do |line_item|
      next if line_item.variant.product.gift_card?
      discount_applicator.apply(line_item)
    end
  end
end

CAMPAIGNS = [
  TieredDiscountBySpendCampaign.new(SPENDING_THRESHOLDS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Differentierad rabatt efter kvantitet

Använd detta skript för att erbjuda en mängdrabatt för en viss produkt med en procentuell rabatt som ökar i förhållande till antalet produkter i varukorgen.

Du kan till exempel använda detta skript för att erbjuda kunder 10 % rabatt på deras order om de köper 2 hattar eller mer, eller 15 % rabatt om de köper 5 hattar eller mer.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discount by Quantity
#
# If the total quantity of matching items is greater than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selector' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'tiers' is a list of tiers where:
# - 'quantity' is the minimum quantity you need to buy to
# qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_DISCOUNT_TIERS = [
  {
    product_selector_match_type: :include,
    product_selector_type: :tag,
    product_selectors: ["your_tag"],
    tiers: [
      {
        quantity: 2,
        discount_type: :percent,
        discount_amount: 10,
        discount_message: '10% off for 2+',
      },
      {
        quantity: 5,
        discount_type: :percent,
        discount_amount: 15,
        discount_message: '15% off for 5+',
      },
    ],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredPricingCampaign
#
# If the total quantity of matching items is greater than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
# ================================================================
class TieredPricingCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      applicable_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if applicable_items.nil?

      total_applicable_quantity = applicable_items.map(&:quantity).reduce(0, :+)
      tiers = campaign[:tiers].sort_by { |tier| tier[:quantity] }.reverse
      applicable_tier = tiers.find { |tier| tier[:quantity] <= total_applicable_quantity }

      next if applicable_tier.nil?

      discount_applicator = DiscountApplicator.new(
        applicable_tier[:discount_type],
        applicable_tier[:discount_amount],
        applicable_tier[:discount_message]
      )

      applicable_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  TieredPricingCampaign.new(PRODUCT_DISCOUNT_TIERS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Differentierad rabatt efter köpta produkter

Använd skriptet för att erbjuda en procentuell rabatt som ökar i enlighet med det totala värdet på specifika artiklar i varukorgen.

Du kan till exempel använda det här skriptet för att erbjuda kunder 10 % rabatt om de spenderar 30 USD eller mer, 15 % rabatt om de spenderar 50 USD eller mer, och 20 % rabatt om de spenderar 100 USD eller mer, men bara för artiklar som matchar en viss tagg.

# ================================ Customizable Settings ================================
# ================================================================
# Tiered Discount by Spend Threhsold
#
# If the total amount spent on matching items is greather than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - 'product_selectors' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes).
# - 'tiers' is a list of tiers where:
# - 'threshold' is the minimum dollar amount needed to
# qualify
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_DISCOUNT_TIERS = [
  {
    product_selector_match_type: :exclude,
    product_selector_type: :tag,
    product_selectors: ["your_tag", "another_tag"],
    tiers: [
      {
        threshold: 100,
        discount_type: :percent,
        discount_amount: 10,
        discount_message: 'Spend $100 or more, and get 10% off!',
      },
    ],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# TieredPricingCampaign
#
# If the total amount spent on matching items is greather than (or
# equal to) an entered threshold, the associated discount is
# applied to each matching item.
# ================================================================
class TieredPricingCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      tiers = campaign[:tiers].sort_by { |tier| tier[:threshold] }.reverse
      applicable_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if applicable_items.nil?

      total_applicable_cost = applicable_items.map(&:line_price).reduce(Money.zero, :+)
      applicable_tier = tiers.find { |tier| total_applicable_cost >= (Money.new(cents: 100) * tier[:threshold]) }

      next if applicable_tier.nil?

      discount_applicator = DiscountApplicator.new(
        applicable_tier[:discount_type],
        applicable_tier[:discount_amount],
        applicable_tier[:discount_message]
      )

      applicable_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  TieredPricingCampaign.new(PRODUCT_DISCOUNT_TIERS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Rabatt på taggad produkt

Använd detta skript för att erbjuda rabatt på artiklar med specifika taggar.

Du kan till exempel använda det här skriptet för att erbjuda kunder 10 % rabatt på artiklar taggade discounted.

# ================================ Customizable Settings ================================
# ================================================================
# Discount by Product Tag
#
# Any product that is tagged (or not, depending on the setting
# below) with the entered tag(s) will be discounted by the entered
# amount.
#
# - 'product_tag_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_tags' is a list of product tags for qualified
# products
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
PRODUCT_TAG_DISCOUNTS = [
  {
    product_tag_match_type: :include,
    product_tags: ["your_tag", "another_tag"],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: '10% off tagged products!'
  }
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductTagSelector
#
# Finds whether the supplied line item does (or does not) have any
# of the entered tags.
# ================================================================
class ProductTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    (product_tags & @tags).send(@comparator)
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# ProductTagDiscountCampaign
#
# Any "matching" product (by tag) will be discounted by the entered
# amount.
# ================================================================
class ProductTagDiscountCampaign
  def initialize(discounts)
    @discounts = discounts
  end

  def run(cart)
    @discounts.each do |discount|
      product_tag_selector = ProductTagSelector.new(
        discount[:product_tag_match_type],
        discount[:product_tags]
      )

      discount_applicator = DiscountApplicator.new(
        discount[:discount_type],
        discount[:discount_amount],
        discount[:discount_message]
      )

      cart.line_items.each do |line_item|
        next unless product_tag_selector.match?(line_item)
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  ProductTagDiscountCampaign.new(PRODUCT_TAG_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
 campaign.run(Input.cart)
end

Output.cart = Input.cart

Rabatt för taggade kunder

Använd skriptet för att erbjuda rabatt till kunder med specifika taggar.

Du kan till exempel använda det här skriptet för att erbjuda 20 % rabatt om kunden har VIP-taggen.

# ================================ Customizable Settings ================================
# ================================================================
# Discounts by Customer Tag
#
# If a customer is tagged (or not, depending on the setting below)
# with the entered tag(s), the entered discount will be applied to
# each item in the cart.
#
# - 'customer_tag_match_type' determines whether we look for the customer
# to be tagged with any of the entered tags or not. Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of tags to identify qualified
# customers
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["VIP"],
    discount_type: :percent,
    discount_amount: 20,
    discount_message: "Discount for VIP customers!",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountForCustomerTagCampaign
#
# If we have a "matching" customer (by tag), the entered discount
# is applied.
# ================================================================
class DiscountForCustomerTagCampaign
  def initialize(discounts)
    @discounts = discounts
  end

  def run(cart)
    return unless cart.customer&.tags

    @discounts.each do |discount|
      customer_tag_selector = CustomerTagSelector.new(discount[:customer_tag_match_type], discount[:customer_tags])

      next unless customer_tag_selector.match?(cart.customer)

      discount_applicator = DiscountApplicator.new(
        discount[:discount_type],
        discount[:discount_amount],
        discount[:discount_message]
      )

      cart.line_items.each do |line_item|
        discount_applicator.apply(line_item)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountForCustomerTagCampaign.new(DISCOUNTS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Köp en viss mängd av en produkt och få ett andra belopp till ett rabatterat pris

Använd detta skript för att erbjuda rabatt på en viss artikel om mer än en viss kvantitet köps.

Du kan till exempel använda detta skript för att erbjuda kunderna att köpa tre artiklar taggade discount och få 50 % rabatt på en fjärde artikel taggad discount.

# ================================ Customizable Settings ================================
# ================================================================
# Buy X, Get Y For Z Discount
#
# Buy a certain number of "matching" items, get a certain number
# of the same matching items with the entered discount applied. For
# example:
#
# "Buy 2 products tagged with 'tag', get another product
# tagged with 'tag' for 10% off"
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - This should only be a number (ie. no quotes)
# - ':variant_id' to find products by variant ID
# - This should only be a number (ie. no quotes)
# - ':all' for all products
# - 'product_selectors' is a list of identifiers (from above) for
# qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'quantity_to_discount' is the number of products to discount
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
#
# Something to note for the case of running multiple offers is
# that there shouldn't be any overlap between product selection
# as this can lead to extra discounting. For example, you should
# NOT offer "Buy 1 Product X, get 1 50% off", as well as "Buy 2
# Product X, get 1 free"
# ================================================================
BUY_X_GET_Y_FOR_Z = [
  {
    product_selector_match_type: :include,
    product_selector_type: :all,
    product_selectors: nil,
    quantity_to_buy: 1,
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 50,
    discount_message: 'Buy one item, get the second 50% off!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# BuyXGetYForZCampaign
#
# Buy a certain number of "matching" items, get a certain number
# of the same matching items with the entered discount applied.
# ================================================================
class BuyXGetYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_items = eligible_items.sort_by { |line_item| -line_item.variant.price }
      quantity_to_buy = campaign[:quantity_to_buy]
      quantity_to_discount = campaign[:quantity_to_discount]
      bundle_size = quantity_to_buy + quantity_to_discount
      number_of_bundles = (eligible_items.map(&:quantity).reduce(0, :+) / bundle_size).floor
      number_of_discountable_items = number_of_bundles * quantity_to_discount

      next unless number_of_discountable_items > 0

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      self.loop_items(
        discount_applicator, cart, eligible_items, number_of_discountable_items, quantity_to_buy, quantity_to_discount
      )
    end
  end

  def loop_items(discount_applicator, cart, line_items, num_to_discount, quantity_to_buy, quantity_to_discount)
    surplus = 0
    bundle_size = quantity_to_buy + quantity_to_discount

    line_items.each do |line_item|
      line_quantity = line_item.quantity + surplus

      if line_quantity > quantity_to_buy
        bundles_per_line = (line_quantity / bundle_size).floor
        take_quantity = bundles_per_line * quantity_to_discount
        surplus += (line_quantity - (bundle_size * bundles_per_line))

        if line_item.quantity > take_quantity
          discount_item = line_item.split(take: take_quantity)
          discount_applicator.apply(discount_item)
          position = cart.line_items.find_index(line_item)
          cart.line_items.insert(position + 1, discount_item)
          num_to_discount -= take_quantity
        else
          discount_applicator.apply(line_item)
          num_to_discount -= line_item.quantity
        end
      else
        surplus += line_quantity
      end

      break if num_to_discount <= 0
    end
  end
end

CAMPAIGNS = [
  BuyXGetYForZCampaign.new(BUY_X_GET_Y_FOR_Z),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Köp flera produkter och få en extra produkt till rabatterat pris

Använd detta skript för att erbjuda rabatt på en viss artikel om kunden har köpt ett antal andra varor.

Du kan till exempel använda det här skriptet för att erbjuda kunderna ett gratis par strumpor om de även köper en hatt, en t-shirt och ett par solglasögon.

# ================================ Customizable Settings ================================
# ================================================================
# Buy Products VWX, get Product Y for Z Discount
#
# Buy a specific bundle of products, get another product at a
# discount. For example:
#
# "Buy a t-shirt, a hat, and sunglasses, get a free pair of socks"
#
# - 'bundle_items' is a list of the items that comprise the
# bundle, where:
# - 'product_id' is the ID of the product
# - 'quantity_needed' is the quantity necessary to complete
# the bundle
# - 'quantity_to_buy' is the number of bundles needed to qualify
# for a discount product
# - 'discount_product_selector_match_type' determines whether we
# look for products that do or don't match the entered
# selectors. Can be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'discount_product_selector_type' determines how qualifying
# products will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'discount_product_selectors' is a list of identifiers (from
# above) for qualifying products. Product/Variant ID lists
# should only contain numbers (ie. no quotes). If ':all' is
# used, this can also be 'nil'.
# - 'quantity_to_discount' is the number of items to discount
# per offer
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUNDLE_DISCOUNTS = [
  {
    bundle_items: [
      {
        product_id: 1234567890987,
        quantity_needed: 1
      },
      {
        product_id: 1234567890986,
        quantity_needed: 1
      },
    ],
    quantity_to_buy: 1,
    discount_product_selector_match_type: :include,
    discount_product_selector_type: :product_id,
    discount_product_selectors: [1234567890123],
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "Buy Product VWX, get Product Y for 10% off",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# BundleSelector
#
# Finds any items that are part of the entered bundle and saves
# them.
# ================================================================
class BundleSelector
  def initialize(bundle_items)
    @bundle_items = bundle_items.reduce({}) do |acc, bundle_item|
      acc[bundle_item[:product_id]] = {
        cart_items: [],
        quantity_needed: bundle_item[:quantity_needed],
        total_quantity: 0,
      }

      acc
    end
  end

  def build(cart)
    cart.line_items.each do |line_item|
      next unless @bundle_items[line_item.variant.product.id]

      @bundle_items[line_item.variant.product.id][:cart_items].push(line_item)
      @bundle_items[line_item.variant.product.id][:total_quantity] += line_item.quantity
    end

    @bundle_items
  end
end

# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each_with_index do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BundleDiscountCampaign
#
# If the entered bundle is present, the entered discount is
# applied to the entered product.
# ================================================================
class BundleDiscountCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      bundle_selector = BundleSelector.new(campaign[:bundle_items])
      bundle_items = bundle_selector.build(cart)

      next if bundle_items.any? do |product_id, product_info|
        product_info[:total_quantity] < product_info[:quantity_needed]
      end

      num_bundles = bundle_items.map do |product_id, product_info|
        (product_info[:total_quantity] / product_info[:quantity_needed])
      end

      num_bundles = num_bundles.min.floor

      product_selector = ProductSelector.new(
        campaign[:discount_product_selector_match_type],
        campaign[:discount_product_selector_type],
        campaign[:discount_product_selectors],
      )

      discount_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if discount_items.nil?

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, discount_items, (campaign[:quantity_to_discount] * num_bundles))
    end
  end
end

CAMPAIGNS = [
  BundleDiscountCampaign.new(BUNDLE_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Paketrabatt

Använd detta skript för att erbjuda rabatt när en viss uppsättning produkter läggs till i varukorgen.

Du kan till exempel använda detta skript för att erbjuda kunderna 20 % rabatt på köp av en T-shirt, en hatt och ett par solglasögon.

# ================================ Customizable Settings ================================
# ================================================================
# Buy Products WXY, get Z Discount
#
# Buy a specific bundle of products, get that bundle at a
# discount. For example:
#
# "Buy a t-shirt, a hat, and sunglasses, get 20% off each"
#
# - 'bundle_items' is a list of the items that comprise the
# bundle, where:
# - 'product_id' is the ID of the product
# - 'quantity_needed' is the quantity necessary to complete
# the bundle
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUNDLE_DISCOUNTS = [
  {
    bundle_items: [
      {
        product_id: 1234567890987,
        quantity_needed: 1
      },
      {
        product_id: 1234567890986,
        quantity_needed: 1
      },
    ],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "Buy Product X and Product Y, get 10% off!",
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# BundleSelector
#
# Finds any items that are part of the entered bundle and saves
# them.
# ================================================================
class BundleSelector
  def initialize(bundle_items)
    @bundle_items = bundle_items.reduce({}) do |acc, bundle_item|
      acc[bundle_item[:product_id]] = {
        cart_items: [],
        quantity_needed: bundle_item[:quantity_needed],
        total_quantity: 0,
      }

      acc
    end
  end

  def build(cart)
    cart.line_items.each do |line_item|
            next if line_item.line_price_changed?
      next unless @bundle_items[line_item.variant.product.id]

      @bundle_items[line_item.variant.product.id][:cart_items].push(line_item)
      @bundle_items[line_item.variant.product.id][:total_quantity] += line_item.quantity
    end

    @bundle_items
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each_with_index do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BundleDiscountCampaign
#
# If the entered bundle is present, the entered discount is
# applied to each item in the bundle.
# ================================================================
class BundleDiscountCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      bundle_selector = BundleSelector.new(campaign[:bundle_items])
      bundle_items = bundle_selector.build(cart)

      next if bundle_items.any? do |product_id, product_info|
        product_info[:total_quantity] < product_info[:quantity_needed]
      end

      num_bundles = bundle_items.map do |product_id, product_info|
        (product_info[:total_quantity] / product_info[:quantity_needed])
      end

      num_bundles = num_bundles.min.floor

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)

      bundle_items.each do |product_id, product_info|
        discount_loop.loop_items(
          cart,
          product_info[:cart_items],
          (product_info[:quantity_needed] * num_bundles),
        )
      end
    end
  end
end

CAMPAIGNS = [
  BundleDiscountCampaign.new(BUNDLE_DISCOUNTS),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Köp en, få en gratis-rabatt (BOGO)

Använd detta skript för att erbjuda en procentuell rabatt på en artikel när en kund köper ett fastställt antal av en annan produkt.

Du kan till exempel använda detta skript för att erbjuda kunderna en hatt med 10 % rabatt om de köper 2 T-shirts.

# ================================ Customizable Settings ================================
# ================================================================
# Buy V of Product W, Get X of Product Y for Z Discount
#
# Buy a certain number of "matching" items, get a certain number
# of a different set of "matching" items with the entered discount
# applied. For example:
#
# "Buy 2 t-shirts, get 1 hat for 10% off"
#
# - 'buy_product_selector_match_type' determines whether we look
# for products that do or don't match the entered selectors.
# Can be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'buy_product_selector_type' determines how eligible products
# will be identified. Can be:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'buy_product_selectors' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should only
# contain numbers (ie. no quotes). If ':all' is used, this
# can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'get_selector_match_type' is the same idea as the "Buy"
# version above
# - 'get_product_selector_type' is the same idea as the "Buy"
# version above
# - 'get_product_selectors' is the same idea as the "Buy"
# version above
# - 'quantity_to_discount' is the number of products to discount
# - 'allow_incomplete_bundle' determines whether a portion of
# the items to discount can be discounted, or all items
# need to be present. Can be:
# - 'true'
# - 'false'
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUYVOFW_GETXOFY_FORZ = [
  {
    buy_product_selector_match_type: :include,
    buy_product_selector_type: :tag,
    buy_product_selectors: ["your_tag", "another_tag"],
    quantity_to_buy: 1,
    get_product_selector_match_type: :include,
    get_product_selector_type: :tag,
    get_product_selectors: ["your_other_tag", "a_different_tag"],
    quantity_to_discount: 1,
    allow_incomplete_bundle: false,
    discount_type: :percent,
    discount_amount: 100,
    discount_message: 'Buy a Product X, get a Product Y free!',
  },
  {
    buy_product_selector_match_type: :include,
    buy_product_selector_type: :id,
    buy_product_selectors: [1234567890987, 1234567890986],
    quantity_to_buy: 1,
    get_product_selector_match_type: :include,
    get_product_selector_type: :id,
    get_product_selectors: [1234567890985, 1234567890984],
    quantity_to_discount: 1,
    allow_incomplete_bundle: false,
    discount_type: :dollar,
    discount_amount: 10,
    discount_message: 'Buy a Product X, get $10 off a Product Y!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# BuyVofWGetXofYForZCampaign
#
# Buy a certain number of "matching" items, get a certain number
# of a different set of "matching" items with the entered discount
# applied.
# ================================================================
class BuyVofWGetXofYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      buy_product_selector = ProductSelector.new(
        campaign[:buy_product_selector_match_type],
        campaign[:buy_product_selector_type],
        campaign[:buy_product_selectors],
      )

      get_product_selector = ProductSelector.new(
        campaign[:get_product_selector_match_type],
        campaign[:get_product_selector_type],
        campaign[:get_product_selectors],
      )

      buy_items = []
      get_items = []

      cart.line_items.each do |line_item|
        buy_items.push(line_item) if buy_product_selector.match?(line_item)
        get_items.push(line_item) if get_product_selector.match?(line_item)
      end

      next if buy_items.empty? || get_items.empty?

      get_items = get_items.sort_by { |line_item| line_item.variant.price }
      quantity_to_buy = campaign[:quantity_to_buy]
      quantity_to_discount = campaign[:quantity_to_discount]
      buy_offers = (buy_items.map(&:quantity).reduce(0, :+) / quantity_to_buy).floor

      if campaign[:allow_incomplete_bundle]
        number_of_bundles = buy_offers
      else
        get_offers = (get_items.map(&:quantity).reduce(0, :+) / quantity_to_discount).floor
        number_of_bundles = [buy_offers, get_offers].min
      end

      number_of_discountable_items = number_of_bundles * quantity_to_discount

      next unless number_of_discountable_items > 0

      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, get_items, number_of_discountable_items)
    end
  end
end

CAMPAIGNS = [
  BuyVofWGetXofYForZCampaign.new(BUYVOFW_GETXOFY_FORZ),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Köp en viss produkt för ett specifikt belopp

Använd detta skript för att erbjuda ett antal produkter till ett valt pris.

Du kan till exempel använda detta skript för att erbjuda kunder 2 T-shirts för 20 USD.

# ================================ Customizable Settings ================================
# ================================================================
# Buy X of Product Y for $Z
#
# Buy a certain number of "matching" items for a specific price.
# For example:
#
# "Buy 2 t-shirts for $20"
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selectors' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should
# only contain numbers (ie. no quotes). If ':all' is used,
# this can also be 'nil'.
# - 'quantity_to_buy' is the number of products needed to
# qualify
# - 'final_price` is the amount to charge for all products that
# are part of the offer
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
BUY_X_GET_Y_FOR_Z = [
  {
    product_selector_match_type: :include,
    product_selector_type: :tag,
    product_selectors: ["your_tag"],
    quantity_to_buy: 2,
    final_price: 100,
    discount_message: 'Buy 2 for $20',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DollarDiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DollarDiscountApplicator
  def initialize(discount_message)
    @discount_message = discount_message
  end

  def apply(line_item, discount_amount)
    new_line_price = line_item.line_price - discount_amount
    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# BuyXOfYForZCampaign
#
# Buy a certain number of "matching" items for a specific price.
# ================================================================
class BuyXOfYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_item_count = eligible_items.map(&:quantity).reduce(0, :+)
      quantity_to_buy = campaign[:quantity_to_buy]
      number_of_offers = (eligible_item_count / quantity_to_buy).floor

      next unless number_of_offers > 0

      number_of_discountable_items = number_of_offers * quantity_to_buy
      total_offer_price = Money.new(cents: 100) * (number_of_offers * campaign[:final_price])
      discount_applicator = DollarDiscountApplicator.new(campaign[:discount_message])

      self.loop_items(cart, eligible_items, number_of_discountable_items, total_offer_price, discount_applicator)
    end
  end

  def loop_items(cart, line_items, num_to_discount, total_price, discount_applicator)
    current_price = Money.zero
    avg_price = total_price * (1 / num_to_discount)

    line_items = line_items.sort_by { |line_item| line_item.variant.price }

    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        discount_amount = split_line_item.line_price - (total_price - current_price)
        discount_applicator.apply(split_line_item, discount_amount)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      elsif line_item.quantity == num_to_discount
        discount_amount = line_item.line_price - (total_price - current_price)
        discount_applicator.apply(line_item, discount_amount)
        break
      else
        if line_item.variant.price <= avg_price
          current_price += line_item.line_price
        else
          discount_amount = (line_item.variant.price - avg_price) * line_item.quantity
          current_price += (line_item.line_price - discount_amount)
          discount_applicator.apply(line_item, discount_amount)
        end

        num_to_discount -= line_item.quantity
      end
    end
  end
end

CAMPAIGNS = [
  BuyXOfYForZCampaign.new(BUY_X_GET_Y_FOR_Z),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Gratis gåva vid köp

Använd detta skript för att erbjuda rabatt på en viss produkt om varukorgens belopp är högre än ett visst belopp.

Du kan till exempel använda det här skriptet för att erbjuda kunderna en gratis gåva om de spenderar mer än 75 USD.

# ================================ Customizable Settings ================================
# ================================================================
# Spend $X, get Product Y for Z Discount
#
# If the cart total is greater than (or equal to) the entered
# threshold (less the discounted amount), the entered number of
# "matching" items is discounted by the entered amount.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':all' for all products
# - 'product_selector' is a list of identifiers (from above)
# for qualifying products. Product/Variant ID lists should
# only contain numbers (ie. no quotes). If ':all' is used,
# this can also be 'nil'.
# - 'threshold' is the dollar amount needed to spend to qualify
# - 'quantity_to_discount' is the number of items to discount
# if qualified
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply (per item)
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
SPENDX_GETY_FORZ = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890123],
    threshold: 75,
    quantity_to_discount: 1,
    discount_type: :percent,
    discount_amount: 100,
    discount_message: 'Spend $75 or more and get a free Product X!',
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if @selector_type == :tag
      product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@selectors & product_tags).send(@comparator)
    elsif @selector_type == :type
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
    elsif @selector_type == :vendor
      @selectors = @selectors.map { |selector| selector.downcase.strip }
      (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
    elsif @selector_type == :product_id
      (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
    elsif @selector_type == :variant_id
      (@match_type == :include) == @selectors.include?(line_item.variant.id)
    elsif @selector_type == :all
      true
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied line item.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      1 - (discount_amount * 0.01)
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(line_item)
    new_line_price = if @discount_type == :percent
      line_item.line_price * @discount_amount
    else
      [line_item.line_price - (@discount_amount * line_item.quantity), Money.zero].max
    end

    line_item.change_line_price(new_line_price, message: @discount_message)
  end
end

# ================================================================
# DiscountLoop
#
# Loops through the supplied line items and discounts the supplied
# number of items by the supplied discount.
# ================================================================
class DiscountLoop
  def initialize(discount_applicator)
    @discount_applicator = discount_applicator
  end

  def loop_items(cart, line_items, num_to_discount)
    line_items.each do |line_item|
      break if num_to_discount <= 0

      if line_item.quantity > num_to_discount
        split_line_item = line_item.split(take: num_to_discount)
        @discount_applicator.apply(split_line_item)
        position = cart.line_items.find_index(line_item)
        cart.line_items.insert(position + 1, split_line_item)
        break
      else
        @discount_applicator.apply(line_item)
        num_to_discount -= line_item.quantity
      end
    end
  end
end

# ================================================================
# SpendXGetYForZCampaign
#
# If the cart total is greater than (or equal to) the entered
# threshold (less the discounted amount), the entered number of
# "matching" items is discounted by the entered amount.
# ================================================================
class SpendXGetYForZCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart)
    @campaigns.each do |campaign|
      threshold = Money.new(cents: 100) * campaign[:threshold]

      next if cart.subtotal_price < threshold

      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      eligible_items = cart.line_items.select { |line_item| product_selector.match?(line_item) }

      next if eligible_items.nil?

      eligible_items = eligible_items.sort_by { |line_item| line_item.variant.price }
      num_to_discount = campaign[:quantity_to_discount]
      cart_total = cart.subtotal_price

      eligible_items.each do |line_item|
        break if num_to_discount <= 0

        if line_item.quantity > num_to_discount
          cart_total -= line_item.variant.price * num_to_discount
          break
        else
          cart_total -= line_item.line_price
          num_to_discount -= line_item.quantity
        end
      end

      next if cart_total < threshold

      discount_applicator = discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message]
      )

      discount_loop = DiscountLoop.new(discount_applicator)
      discount_loop.loop_items(cart, eligible_items, campaign[:quantity_to_discount])
    end
  end
end

CAMPAIGNS = [
  SpendXGetYForZCampaign.new(SPENDX_GETY_FORZ),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Inaktivera rabattkoder

Använd detta skript för att inaktivera användning av rabattkoder i kassan.

Du kan till exempel använda det här skriptet för att förhindra att kunder använder rabattkoder medan din butik erbjuder rea.

# ================================ Customizable Settings ================================
# ================================================================
# Disable Discount Code Use
#
# Any discount codes will be rejected with the entered message.
#
# - 'REJECTION_MESSAGE' is the message to show when a discount
# code is rejected
# ================================================================
REJECTION_MESSAGE = 'Discount codes cannot be used during this sale'

# ================================ Script Code (do not edit) ================================
# ================================================================
# DisableDiscountCodesCampaign
#
# Any discount codes will be rejected with the entered message.
# ================================================================
class DisableDiscountCodesCampaign
  def initialize(rejection_message)
    @rejection_message = rejection_message
  end

  def run(cart)
    return if cart.discount_code.nil?

    cart.discount_code.reject(message: @rejection_message)
  end
end

CAMPAIGNS = [
  DisableDiscountCodesCampaign.new(REJECTION_MESSAGE),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart)
end

Output.cart = Input.cart

Är du redo att börja sälja med Shopify?

Prova gratis