Eksempler på fraktprisskript

Denne siden ble skrevet ut den Apr 25, 2024. Gå til https://help.shopify.com/nb/manual/checkout-settings/script-editor/examples/shipping-scripts for nyeste versjon.

Fraktskript samhandler med fraktpriser, og kan endre tittel, synlighet, visningsrekkefølge og pris. Disse skriptene kjører hver gang kunden din er inne på siden med fraktalternativer i kassen.

Fraktskript som rabatterer et abonnement gjelder bare for den første betalingen i abonnementet. Påfølgende betalinger rabatteres ikke av skriptet.

For å bruke malene på denne siden oppretter du et nytt skript med en blank mal.

Steg:

Fra Shopify-administrator går du til Apper > Script Editor.
Klikk på Opprett skript.
Klikk på Fraktpriser.
Velg Blank mal og klikk deretter på Opprett skript.
I seksjonen Ruby-kildekode sletter du standardlinjen med kode: Output.cart = Input.cart
Kopier et skript fra denne siden og lim det inn i seksjonen Ruby-kildekode.
Rediger seksjonen Tilpassbare innstillinger i skriptet så de passer til butikken din.
Test skriptet. For mer informasjon kan du se Testing og feilsøking av Shopify Scripts.
Etter testing:
- Klikk på Lagre utkast for å lagre et upublisert utkast av skriptet, eller
- Klikk Lagre og publiser for å opprette og publisere skriptet.

På denne siden

Legg til en melding for prisnavnene for bestemte provinser og land
Vis priser for et bestemt postnummer, provins og land
Skjul priser for et bestemt postnummer, provins og land
Skjul priser for spesifikke produkter i enkelte land
Skjul priser for postboksleveranser
Vis priser etter kundetagg
Sorter priser på nytt
Rabatter prisene etter rabattkode
Rabatter pris etter kundetagg
Vis kun priser beregnet av transportør

Legg til en melding for prisnavnene for bestemte provinser og land

Bruk dette skriptet til å legge til en melding i fraktprisene basert på provinsen og landet til leveringsadressen.

Du kan for eksempel legge til en melding for fraktprisene til British Columbia og Ontario (Canada), og Washington og New York (USA) som sier Due to COVID-19 disruptions, shipping might take longer than normal.

# ================================ Customizable Settings ================================
# ================================================================
# Add Message to Rate Names for Province or Country
#
# If the cart's shipping address province/country matches
# the entered settings, all shipping rates will have the
# entered message appended to their name.
#
# - 'country_code' is a 2-character abbreviation for the
# applicable country
# - 'province_code_match_type' determines whether we look for
# provinces that do, or don't, match the entered options, or
# all provinces. Can be:
# - ':include' to look for provinces that DO match
# - ':exclude' to look for provinces that DO NOT match
# - ':all' to look for all provinces
# - 'province_codes' is a list of 2-character abbreviations for
# the applicable provinces
# - 'message' is the message to append to rate names
# ================================================================
RATE_MESSAGE_FOR_PROVINCE_COUNTRY = [
  {
    country_code: "CA",
    province_code_match_type: :include,
    province_codes: ["BC", "ON"],
    message: "Due to COVID-19 disruptions, shipping might take longer than normal."
  },
  {
    country_code: "US",
    province_code_match_type: :include,
    province_codes: ["NY", "WA"],
    message: "Due to COVID-19 disruptions, shipping might take longer than normal."
  },
]

# ================================ Script Code (do not edit) ===============================
# ================================================================
# ProvinceSelector
#
# Finds whether the supplied province code matches the entered
# strings.
# ================================================================
class ProvinceSelector
  def initialize(match_type, provinces)
    @match_type = match_type
    @provinces = provinces.map { |province| province.upcase.strip }
  end

  def match?(province_code)
    if @match_type == :all
      true
    else
      (@match_type == :include) == @provinces.any? { |province| province_code.upcase.strip == province }
    end
  end
end

# ================================================================
# AddMessageToRateForProvinceCountryCampaign
#
# If the cart's shipping address country/province matches the
# entered settings, all shipping rates will have the entered
# message appended to their name
# ================================================================
class AddMessageToRateForProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.shipping_address.nil?

    address = cart.shipping_address

    @campaigns.each do |campaign|
      next unless address.country_code.upcase.strip == campaign[:country_code].upcase.strip

      province_selector = ProvinceSelector.new(campaign[:province_code_match_type],campaign[:province_codes])

      next unless province_selector.match?(address.province_code)

      shipping_rates.each do |shipping_rate|
        rate_name = shipping_rate.name + ' - ' + campaign[:message]
        shipping_rate.change_name(rate_name)
      end
    end
  end
end

CAMPAIGNS = [
  AddMessageToRateForProvinceCountryCampaign.new(RATE_MESSAGE_FOR_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Vis priser for et bestemt postnummer, provins og land

Bruk dette skriptet for å kun vise bestemte fraktpriser til kunder fra en bestemt plassering.

Du kan for eksempel bare vise en bestemt fraktpris til kunder i postnummeret 90210 i California. Prisen skjules for alle andre plasseringer.

# ================================ Customizable Settings ================================
# ================================================================
# Show Rate(s) for Zip/Province/Country
#
# If the cart's shipping address country/province/zip match the
# entered settings, the entered rate(s) are shown, and all other
# rates are hidden. Otherwise, the entered rate(s) are hidden.
#
# - 'country_code' is a 2-character abbreviation for the
# applicable country
# - 'province_code' is a list of 2-character abbreviations for
# the applicable province(s)
# - 'zip_code_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'zip_codes' is a list of strings to identify zip codes
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of strings to identify rates
# - if using ':all' above, this can be set to 'nil'
# ================================================================
SHOW_RATES_FOR_ZIP_PROVINCE_COUNTRY = [
  {
    country_code: "US",
    province_code: "CA",
    zip_code_match_type: :exact,
    zip_codes: ["90210"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ZipCodeSelector
#
# Finds whether the supplied zip code matches any of the entered
# strings.
# ================================================================
class ZipCodeSelector
  def initialize(match_type, zip_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @zip_codes = zip_codes.map { |zip_code| zip_code.upcase.strip }
  end

  def match?(zip_code)
    @zip_codes.any? { |zip| zip_code.to_s.upcase.strip.send(@comparator, zip) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# ShowRatesForZipProvinceCountryCampaign
#
# If the cart's shipping address zip/province/country match the
# entered settings, the entered rate(s) are shown, and all other
# rates are hidden. Otherwise, the entered rate(s) are hidden.
# ================================================================
class ShowRatesForZipProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    @campaigns.each do |campaign|
      zip_code_selector = ZipCodeSelector.new(campaign[:zip_code_match_type], campaign[:zip_codes])
      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])

      if address.nil?
        full_match = false
      else
        country_match = address.country_code.upcase.strip == campaign[:country_code].upcase.strip
        province_match = address.province_code.upcase.strip == campaign[:province_code].upcase.strip
        zip_match = zip_code_selector.match?(address.zip)
        full_match = country_match && province_match && zip_match
      end

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate) != full_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowRatesForZipProvinceCountryCampaign.new(SHOW_RATES_FOR_ZIP_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Skjul priser for et bestemt postnummer, provins og land

Bruk dette skriptet for å skjule bestemte priser for kunder på en bestemt plassering.

Du kan for eksempel skjule en bestemt fraktpris fra kunder i postnummeret 90210 i California.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for Zip/Province/Country
#
# If the cart's shipping address country/province/zip match the
# entered settings, the entered rate(s) are hidden.
#
# - 'country_code' is a 2-character abbreviation for the
# applicable country or region
# - 'province_code' is a list of 2-character abbreviations for
# the applicable provinces or states
# - 'zip_code_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'zip_codes' is a list of strings to identify zip codes
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of strings to identify rates
# - if using ':all' above, this can be set to 'nil'
# ================================================================
HIDE_RATES_FOR_ZIP_PROVINCE_COUNTRY = [
  {
    country_code: "US",
    province_code: "CA",
    zip_code_match_type: :exact,
    zip_codes: ["90210"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ZipCodeSelector
#
# Finds whether the supplied zip code matches any of the entered
# strings.
# ================================================================
class ZipCodeSelector
  def initialize(match_type, zip_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @zip_codes = zip_codes.map { |zip_code| zip_code.upcase.strip }
  end

  def match?(zip_code)
    @zip_codes.any? { |zip| zip_code.to_s.upcase.strip.send(@comparator, zip) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForZipProvinceCountryCampaign
#
# If the cart's shipping address zip/province/country match the
# entered settings, the entered rate(s) are hidden.
# ================================================================
class HideRatesForZipProvinceCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      zip_code_selector = ZipCodeSelector.new(campaign[:zip_code_match_type], campaign[:zip_codes])

      country_match = address.country_code.upcase.strip == campaign[:country_code].upcase.strip
      province_match = address.province_code.upcase.strip == campaign[:province_code].upcase.strip
      zip_match = zip_code_selector.match?(address.zip)

      next unless country_match && province_match && zip_match

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForZipProvinceCountryCampaign.new(HIDE_RATES_FOR_ZIP_PROVINCE_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Skjul priser for spesifikke produkter i enkelte land

Bruk dette skriptet for å skjule priser for kunder fra et bestemt land når de kjøper et bestemt produkt.

Du kan for eksempel skjule en bestemt fraktpris for kunder i Canada dersom de kjøper en T-skjorte.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for Product/Country
#
# If the cart contains any matching items, and we have a matching
# country, the entered rate(s) are hidden.
#
# - 'product_selector_match_type' determines whether we look for
# products that do or don't match the entered selectors. Can
# be:
# - ':include' to check if the product does match
# - ':exclude' to make sure the product doesn't match
# - 'product_selector_type' determines how eligible products
# will be identified. Can be either:
# - ':tag' to find products by tag
# - ':type' to find products by type
# - ':vendor' to find products by vendor
# - ':product_id' to find products by ID
# - ':variant_id' to find products by variant ID
# - ':subscription' to find subscription products
# - 'product_selectors' is a list of tags or IDs to identify
# associated products
# - 'country_code_match_type' determines whether we look for
# countries that do, or don't, match the entered options, or
# all countries. Can be:
# - ':include' to look for countries that DO match
# - ':exclude' to look for countries that DO NOT match
# - ':all' to look for all countries
# - 'country_codes' is a list of country code abbreviations
# - ie. United States would be `US`
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of strings to identify rates
# - if using ':all' above, this can be set to 'nil'
# ================================================================
HIDE_RATES_FOR_PRODUCT_AND_COUNTRY = [
  {
    product_selector_match_type: :include,
    product_selector_type: :product_id,
    product_selectors: [1234567890987, 1234567890986],
    country_code_match_type: :include,
    country_codes: ["CA"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ProductSelector
#
# Finds matching products by the entered criteria.
# ================================================================
class ProductSelector
  def initialize(match_type, selector_type, selectors)
    @match_type = match_type
    @comparator = match_type == :include ? 'any?' : 'none?'
    @selector_type = selector_type
    @selectors = selectors
  end

  def match?(line_item)
    if self.respond_to?(@selector_type)
      self.send(@selector_type, line_item)
    else
      raise RuntimeError.new('Invalid product selector type')
    end
  end

  def tag(line_item)
    product_tags = line_item.variant.product.tags.map { |tag| tag.downcase.strip }
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@selectors & product_tags).send(@comparator)
  end

  def type(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.product_type.downcase.strip)
  end

  def vendor(line_item)
    @selectors = @selectors.map { |selector| selector.downcase.strip }
    (@match_type == :include) == @selectors.include?(line_item.variant.product.vendor.downcase.strip)
  end

  def product_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.product.id)
  end

  def variant_id(line_item)
    (@match_type == :include) == @selectors.include?(line_item.variant.id)
  end

  def subscription(line_item)
    !line_item.selling_plan_id.nil?
  end
end

# ================================================================
# CountrySelector
#
# Finds whether the supplied country code matches the entered
# strings.
# ================================================================
class CountrySelector
  def initialize(match_type, countries)
    @match_type = match_type
    @countries = countries.map { |country| country.upcase.strip }
  end

  def match?(country_code)
    if @match_type == :all
      true
    else
      (@match_type == :include) == @countries.any? { |country| country_code.upcase.strip == country }
    end
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names&.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForProductCountryCampaign
#
# If the cart contains any matching items, and we have a matching
# country, the entered rate(s) are hidden.
# ================================================================
class HideRatesForProductCountryCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      product_selector = ProductSelector.new(
        campaign[:product_selector_match_type],
        campaign[:product_selector_type],
        campaign[:product_selectors],
      )

      country_selector = CountrySelector.new(campaign[:country_code_match_type], campaign[:country_codes])
      product_match = cart.line_items.any? { |line_item| product_selector.match?(line_item) }
      country_match = country_selector.match?(address.country_code)

      next unless product_match && country_match

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names],
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForProductCountryCampaign.new(HIDE_RATES_FOR_PRODUCT_AND_COUNTRY),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Skjul priser for postboksleveranser

Bruk dette skriptet for å skjule en bestemt pris for kunder dersom leveringsadressen deres er en postboks.

# ================================ Customizable Settings ================================
# ================================================================
# Hide Rate(s) for PO Box addresses
#
# If the shipping address contains any of the entered "PO Box"
# identifiers, the entered rate(s) are hidden.
#
# - 'po_box_triggers' is a list of possible strings for a PO
# Box address
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - ':all' for all rates
# - 'rate_names' is a list of rates to show/hide if the above
# conditions are met
# ================================================================
HIDE_RATES_FOR_PO_BOX = [
  {
    po_box_triggers: [
      "po box", "post office", "p o box", "p.o.box", "p.o. box", "p.o box", "pobox",
      "post office box", "post box", "p. o. box", "po. box", "postal box",
    ],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# AddressSelector
#
# Finds whether the supplied address contains any of the entered
# strings.
# ================================================================
class AddressSelector
  def initialize(triggers)
    @triggers = triggers.map { |trigger| trigger.downcase.strip }
  end

  def match?(address)
    address_fields = [address.address1, address.address2].map do |line|
      line.nil? ? "" : line.downcase
    end

    address_fields = address_fields.join(" ")
    @triggers.any? { |trigger| address_fields.include?(trigger) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @match_type = match_type
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    if @match_type == :all
      true
    else
      @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
    end
  end
end

# ================================================================
# HideRatesForPOBoxCampaign
#
# If the shipping address contains any of the entered "PO Box"
# identifiers, the entered rate(s) are hidden.
# ================================================================
class HideRatesForPOBoxCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    address = cart.shipping_address

    return if address.nil?

    @campaigns.each do |campaign|
      next unless AddressSelector.new(campaign[:po_box_triggers]).match?(address)

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names],
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  HideRatesForPOBoxCampaign.new(HIDE_RATES_FOR_PO_BOX),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Vis priser etter kundetagg

Bruk dette skriptet for å vise en bestemt pris bare for kunder som er spesifikt tagget.

Du kan for eksempel bare vise en bestemt fraktpris til kunder med taggen VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Show Rate(s) for Customer Tag
#
# If we have a matching customer, the entered rate(s) will be
# shown, and all others will be hidden. Otherwise, the entered
# rate(s) will be hidden.
#
# - 'customer_tag_match_type' determines whether we look for the
# customer to be tagged with any of the entered tags or not.
# Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of customer tags to trigger the
# campaign
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'rate_names' is a list of strings to identify rates
# ================================================================
SHOW_RATES_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags.
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# ShowRateForCustomerTagCampaign
#
# If we have a matching customer, the entered rate(s) will be
# shown, and all others will be hidden. Otherwise, the entered
# rate(s) will be hidden.
# ================================================================
class ShowRateForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(
        campaign[:customer_tag_match_type],
        campaign[:customer_tags]
      )

      customer_match = cart.customer.nil? ? false : customer_tag_selector.match?(cart.customer)

      rate_name_selector = RateNameSelector.new(
        campaign[:rate_match_type],
        campaign[:rate_names]
      )

      shipping_rates.delete_if do |shipping_rate|
        rate_name_selector.match?(shipping_rate) != customer_match
      end
    end
  end
end

CAMPAIGNS = [
  ShowRateForCustomerTagCampaign.new(SHOW_RATES_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Sorter priser på nytt

Bruk dette skriptet for å endre standardrekkefølgen på fraktprisene som tilbys kundene dine.

# ================================ Customizable Settings ================================
# ================================================================
# The order in which you would like your rates to display
# ================================================================
DESIRED_RATE_ORDER = [
  "Shipping Rate 1", "Shipping Rate 2", "Shipping Rate 3",
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# ReorderRatesCampaign
#
# Reorders rates into the entered order
# ================================================================
class ReorderRatesCampaign
  def initialize(desired_order)
    @desired_order = desired_order.map { |item| item.downcase.strip }
  end

  def run(cart, shipping_rates)
    shipping_rates.sort_by! { |rate| @desired_order.index(rate.name.downcase.strip) || Float::INFINITY }
  end
end

CAMPAIGNS = [
  ReorderRatesCampaign.new(DESIRED_RATE_ORDER),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Rabatter prisene etter rabattkode

Bruk dette skriptet til å tilby rabatt på en bestemt pris dersom kunden har brukt en bestemt rabattkode i kassen.

Hvis kunden for eksempel har brukt rabattkoden «DISCOUNT_15», kan du gi en rabatt med en bestemt sats.

# ================================ Customizable Settings ================================
# ================================================================
# Discount Rate(s) by Discount Code(s)
#
# If one of the entered discount codes is used, the entered
# rate(s) are discounted by the entered amount.
#
# - 'discount_code_match_type' determines whether the below
# strings should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'discount_codes' is a list of strings to identify discount
# codes
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'rate_names' is a list of strings to identify rates
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_DISCOUNT_CODES = [
  {
    discount_code_match_type: :exact,
    discount_codes: ["TESTCODE1", "TESTCODE2"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
    discount_type: :percent,
    discount_amount: 100,
    discount_message: "Free Shipping with discount code"
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# DiscountCodeSelector
#
# Finds whether the supplied discount code matches any of the
# entered codes.
# ================================================================
class DiscountCodeSelector
  def initialize(match_type, discount_codes)
    @comparator = match_type == :exact ? '==' : 'include?'
    @discount_codes = discount_codes.map { |discount_code| discount_code.upcase.strip }
  end

  def match?(discount_code)
    @discount_codes.any? { |code| discount_code.code.upcase.send(@comparator, code) }
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names.
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied shipping rate.
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      discount_amount * 0.01
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(shipping_rate)
    rate_discount = if @discount_type == :percent
      shipping_rate.price * @discount_amount
    else
      @discount_amount
    end

    shipping_rate.apply_discount(rate_discount, message: @discount_message)
  end
end

# ================================================================
# DiscountRatesForDiscountCodeCampaign
#
# If one of the entered discount codes is used, the entered
# rate(s) are discounted by the entered amount.
# ================================================================
class DiscountRatesForDiscountCodeCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.discount_code.nil?

    @campaigns.each do |campaign|
      discount_code_selector = DiscountCodeSelector.new(campaign[:discount_code_match_type], campaign[:discount_codes])

      next unless discount_code_selector.match?(cart.discount_code)

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])
      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message],
      )

      shipping_rates.each do |shipping_rate|
        next unless rate_name_selector.match?(shipping_rate)
        discount_applicator.apply(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountRatesForDiscountCodeCampaign.new(DISCOUNTS_FOR_DISCOUNT_CODES),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Rabatter pris etter kundetagg

Bruk dette skriptet til å rabattere en bestemt pris for kunder som er spesifikt tagget.

Du kan for eksempel tilby 10 % rabatt på en bestemt pris dersom kunden har taggen VIP.

# ================================ Customizable Settings ================================
# ================================================================
# Discount Rate(s) for Customer Tag(s)
#
# If we have a matching customer, the entered rate(s) are
# discounted by the entered amount.
#
# - 'customer_tag_match_type' determines whether we look for the customer
# to be tagged with any of the entered tags or not. Can be:
# - ':include' to check if the customer is tagged
# - ':exclude' to make sure the customer isn't tagged
# - 'customer_tags' is a list of customer tags to qualify for
# a discount
# - 'rate_match_type' determines whether the below strings
# should be an exact or partial match. Can be:
# - ':exact' for an exact match
# - ':partial' for a partial match
# - 'rate_names' is a list of strings to identify rates
# - 'discount_type' is the type of discount to provide. Can be
# either:
# - ':percent'
# - ':dollar'
# - 'discount_amount' is the percentage/dollar discount to
# apply
# - 'discount_message' is the message to show when a discount
# is applied
# ================================================================
DISCOUNTS_FOR_CUSTOMER_TAG = [
  {
    customer_tag_match_type: :include,
    customer_tags: ["customer_tag", "another_tag"],
    rate_match_type: :exact,
    rate_names: ["Shipping Rate", "Other Shipping Rate"],
    discount_type: :percent,
    discount_amount: 10,
    discount_message: "10% off shipping for tagged customers"
  },
]

# ================================ Script Code (do not edit) ================================
# ================================================================
# CustomerTagSelector
#
# Finds whether the supplied customer has any of the entered tags
# ================================================================
class CustomerTagSelector
  def initialize(match_type, tags)
    @comparator = match_type == :include ? 'any?' : 'none?'
    @tags = tags.map { |tag| tag.downcase.strip }
  end

  def match?(customer)
    customer_tags = customer.tags.map { |tag| tag.downcase.strip }
    (@tags & customer_tags).send(@comparator)
  end
end

# ================================================================
# RateNameSelector
#
# Finds whether the supplied rate name matches any of the entered
# names
# ================================================================
class RateNameSelector
  def initialize(match_type, rate_names)
    @comparator = match_type == :exact ? '==' : 'include?'
    @rate_names = rate_names.map { |rate_name| rate_name.downcase.strip }
  end

  def match?(shipping_rate)
    @rate_names.any? { |name| shipping_rate.name.downcase.send(@comparator, name) }
  end
end

# ================================================================
# DiscountApplicator
#
# Applies the entered discount to the supplied shipping rate
# ================================================================
class DiscountApplicator
  def initialize(discount_type, discount_amount, discount_message)
    @discount_type = discount_type
    @discount_message = discount_message

    @discount_amount = if discount_type == :percent
      discount_amount * 0.01
    else
      Money.new(cents: 100) * discount_amount
    end
  end

  def apply(shipping_rate)
    rate_discount = if @discount_type == :percent
      shipping_rate.price * @discount_amount
    else
      @discount_amount
    end

    shipping_rate.apply_discount(rate_discount, message: @discount_message)
  end
end

# ================================================================
# DiscountRatesForCustomerTagCampaign
#
# If we have a matching customer, the entered rate(s) are
# discounted by the entered amount.
# ================================================================
class DiscountRatesForCustomerTagCampaign
  def initialize(campaigns)
    @campaigns = campaigns
  end

  def run(cart, shipping_rates)
    return if cart.customer.nil?

    @campaigns.each do |campaign|
      customer_tag_selector = CustomerTagSelector.new(campaign[:customer_tag_match_type], campaign[:customer_tags])

      next unless customer_tag_selector.match?(cart.customer)

      rate_name_selector = RateNameSelector.new(campaign[:rate_match_type], campaign[:rate_names])
      discount_applicator = DiscountApplicator.new(
        campaign[:discount_type],
        campaign[:discount_amount],
        campaign[:discount_message],
      )

      shipping_rates.each do |shipping_rate|
        next unless rate_name_selector.match?(shipping_rate)
        discount_applicator.apply(shipping_rate)
      end
    end
  end
end

CAMPAIGNS = [
  DiscountRatesForCustomerTagCampaign.new(DISCOUNTS_FOR_CUSTOMER_TAG),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.cart, Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Vis kun priser beregnet av transportør

Bruk dette skriptet til å kun vise transportørberegnede priser. Hvis transportørberegnede priser ikke er tilgjengelig vil de manuelt opprettede prisene bli vist.

# ================================================================
# Carrier Calculated Rate Fallback
#
# As long as carrier calculated rates are available, Shopify rates
# will be hidden.
# ================================================================
class CalculatedRateFallbackCampaign
  def run(shipping_rates)
    has_calculated_rates = shipping_rates.any?{ |shipping_rate| shipping_rate.source.downcase != 'shopify' }

    return unless has_calculated_rates

    shipping_rates.delete_if { |shipping_rate| shipping_rate.source.downcase == 'shopify' }
  end
end

CAMPAIGNS = [
  CalculatedRateFallbackCampaign.new(),
]

CAMPAIGNS.each do |campaign|
  campaign.run(Input.shipping_rates)
end

Output.shipping_rates = Input.shipping_rates

Eksempler på fraktprisskript

Steg:

På denne siden

Legg til en melding for prisnavnene for bestemte provinser og land

Vis priser for et bestemt postnummer, provins og land

Skjul priser for et bestemt postnummer, provins og land

Skjul priser for spesifikke produkter i enkelte land

Skjul priser for postboksleveranser

Vis priser etter kundetagg

Sorter priser på nytt

Rabatter prisene etter rabattkode

Rabatter pris etter kundetagg

Vis kun priser beregnet av transportør

Er du klar til å begynne å selge med Shopify?